One Control OC10W

One Control Crocodile Tail Loop Wing (OC10W) User Manual

Model: OC10W | Brand: One Control

1. Продукт закінчивсяview

The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.

Фронт view of the One Control Crocodile Tail Loop Wing (OC10W)

Малюнок 1: Спереду view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.

2. Посібник із налаштування

2.1. Підключення живлення

Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).

2.2. Звукові підключення

  1. Підключіть свою гітару або інструмент до ВХІД Джек.
  2. Підключіть OUT1 or OUT2 Джек до вашого ampвнесок ліфіера.
  3. For each effect pedal, connect the pedal's input to a НАДІСЛАТИ jack (e.g., SEND1) and the pedal's output to the corresponding ПОВЕРНЕННЯ jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
  4. The ТЮНЕР output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.
Задня view of the One Control Crocodile Tail Loop Wing (OC10W) showing all input/output jacks

Малюнок 2: Задня частина view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.

2.3. MIDI-з'єднання

Use standard MIDI cables to connect the MIDI IN і MIDI OUT jacks to other MIDI-compatible devices for comprehensive control and synchronization.

2.4. Bluetooth Pairing (Winglink App)

The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.

Close-up of the Winglink logo and a footswitch on the OC10W

Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.

3. Операція

3.1. Режими роботи

The OC10W supports two primary modes of operation:

  • Режим програми: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
  • Ручний режим: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.

3.2. Footswitch Functions

The OC10W features multiple footswitches for versatile control:

  • PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
  • BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
  • MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
  • FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
  • FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.
Close-up of the footswitch section on the OC10W

Малюнок 4: Збільшений план view of the OC10W's footswitch section, including the main program/loop switches and control switches.

3.3. Дисплей та індикатори

The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.

Close-up of the digital display on the OC10W

Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.

4. Технічне обслуговування

To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:

  • Прибирання: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
  • Зберігання: Зберігайте пристрій у прохолодному, сухому місці, подалі від прямих сонячних променів, екстремальних температур та високої вологості.
  • Підключення: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
  • Ножні перемикачі: While designed for durability, avoid excessive force when operating the footswitches.

5. Вирішення проблем

If you encounter issues with your OC10W, refer to the following common problems and solutions:

проблемаМожлива причинаРішення
Немає живлення/Пристрій не вмикаєтьсяIncorrect power supply; Loose power connection; Faulty power supplyEnsure a 9V DC power supply is correctly connected. Verify power supply functionality.
No sound/Signal lossIncorrect audio connections; Faulty cables; Loop not active; Tuner mute engagedCheck all input, output, send, and return cables. Ensure the correct loops are active. Disengage tuner mute if active.
MIDI control not workingIncorrect MIDI connections; MIDI channel mismatch; Incorrect MIDI settingsVerify MIDI In/Out connections. Ensure MIDI channels match between devices. Check MIDI settings in the OC10W and connected devices.
Проблеми з підключенням BluetoothBluetooth off on device; App issues; InterferenceEnsure Bluetooth is enabled on your iOS device. Restart the Winglink app and the OC10W. Try pairing again.

6. Технічні характеристики

ОсобливістьСпецифікація
МодельCrocodile Tail Loop Wing (OC10W)
Тип ефектуProgrammable 10-Channel Loop Switcher
Петлі7x Serial Mono Loops, 3x Parallel Loops
Buffer CircuitBJF Buffer (switchable)
Тип байпасуTrue Bypass (when buffer is off)
Предустановки168 MIDI Presets
КОНТРОЛЬFootswitches, Full MIDI Control, Bluetooth (Winglink iOS app)
Додаткові функціїTuner Out with Mute Switch, 3x FS Connectors (TRS), 8-pin DIN plug
Джерело живленняПровідний електричний
томtage9 вольт
Ampераж150 міліamps
Розміри (Д x Ш x В)46.5 х 12 х 8.5 см
Вага товару1.6 кг
Апаратний інтерфейсBluetooth
Формат сигналуАналоговий

7. Гарантія та підтримка

One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official webсайт. Будь ласка, збережіть підтвердження покупки для гарантійних претензій.

Виробник: One Control

Пов'язані документи - OC10W

попередньоview Інструкція користувача петлі для крокодилового хвоста One Control
Посібник користувача для One Control Crocodile Tail Loop, флагманського програмованого педального перемикача з можливостями MIDI та вбудованим буфером BJF.
попередньоview One Control Chamaeleo Tail Loop MK2 User Manual
User manual for the One Control Chamaeleo Tail Loop MK2, a programmable guitar effects loop switcher with 5 loops, buffer, and intuitive controls.
попередньоview One Control Caiman Tail Loop User Manual
User manual for the One Control Caiman Tail Loop, a 150 preset MIDI 5PC/CC with Tap Tempo Switcher. Details features, front and rear panel descriptions, PGM hierarchy, footswitch and MIDI settings, initialization setup, and specifications.
попередньоview Agamidae Tail Loop User Manual
User manual for the One Control Agamidae Tail Loop, detailing its features, operation, and technical specifications for managing guitar effects pedals.
попередньоview Gebruikershandleiding Chamaeleo Tail Loop MKIII - One Control
Gedetailleerde gebruikershandleiding voor de One Control Chamaeleo Tail Loop MKIII, een compacte 5-programmige loopswitcher met 4 serieloops, 1 aparte loop, Mute/Tuner Out en BJF Buffer voor effectieve signaalroutering.
попередньоview One Control Minimal Series Black Loop with BJF Buffer User Manual
User manual for the One Control Minimal Series Black Loop with BJF Buffer, detailing its features as a versatile loop switcher and buffer, specifications, and operational guidance.