DB Electrical 400-52216

DB Electrical Alternator 400-52216 User Manual

Compatible with Carrier Transicold ComfortPro PC6022, PC6028, PC6024, PC6112

1. Продукт закінчивсяview

This manual provides essential information for the installation, operation, and maintenance of your DB Electrical Alternator, model 400-52216. This high-quality aftermarket alternator is designed to meet OEM specifications and is compatible with various Carrier Transicold ComfortPro models, ensuring reliable power generation for your vehicle's electrical system.

Ключові характеристики:

  • томtage: 12 В.
  • Ampвік: 55 Amps
  • Обертання: за годинниковою стрілкою (CW)
  • Regulator: Internal Regulator (IR)
  • Fan Type: Internal Fan (IF)
  • 100% New aftermarket unit

Сумісність:

  • Carrier Transicold ComfortPro PC6000, PC6002, PC6003, PC6006, PC6011, PC6012, PC6022, PC6024, PC6028, PC6112
  • Replaces DIXIE: A-80410
  • Replaces KUBOTA: 19630-64010, 19630-64012, 19630-64013
  • Replaces LESTER: 12352

2. Інформація про безпеку

ПОПЕРЕДЖЕННЯ: Попередження щодо Пропозиції 65: Цей продукт може містити хімічні речовини, які, як відомо штату Каліфорнія, викликають рак, вроджені вади розвитку або інші репродуктивні порушення.

Завжди дотримуйтесь наступних запобіжних заходів під час роботи з автомобільними електричними системами:

  • Disconnect the vehicle's battery before beginning any installation or maintenance work to prevent electrical shock or short circuits.
  • Використовуйте відповідні засоби індивідуального захисту (ЗІЗ), включаючи захисні окуляри та рукавички.
  • Перш ніж працювати під транспортним засобом, переконайтеся, що він належним чином підпертий та закріплений.
  • Do not touch hot engine components. Allow the engine to cool before servicing.
  • Зверніться до посібника з обслуговування вашого автомобіля для отримання детальних інструкцій та специфікацій крутного моменту.
  • Якщо ви не впевнені щодо якогось кроку, зверніться до кваліфікованого автомобільного техніка.

3. Інструкції зі встановлення

The following are general steps for alternator replacement. Specific procedures may vary by vehicle model. Always consult your vehicle's service manual.

  1. Приготування:
    • Переконайтеся, що двигун вимкнений і охолонув.
    • Disconnect the negative (-) battery terminal, then the positive (+) terminal.
    • Locate the alternator. It is typically driven by a serpentine belt.
  2. Зняття старого генератора змінного струму:
    • Loosen the tensioner pulley and remove the serpentine belt from the alternator pulley.
    • Disconnect all electrical connections from the alternator (main power wire, regulator wires). Note their positions for reinstallation.
    • Remove the mounting bolts securing the alternator to the engine block or bracket.
    • Обережно вийміть старий генератор з моторного відсіку.
  3. Встановлення нового генератора змінного струму:
    • Position the new DB Electrical Alternator 400-52216 into place.
    • Secure it with the mounting bolts. Do not fully tighten yet.
    • Reconnect all electrical connections. Ensure they are clean and secure.
    • Place the serpentine belt back onto the alternator pulley and other pulleys.
    • Adjust the belt tensioner to the manufacturer's specifications.
    • Tighten all mounting bolts and the tensioner pulley bolt.
  4. Останні кроки:
    • Reconnect the positive (+) battery terminal, then the negative (-) terminal.
    • Запустіть двигун і перевірте правильність роботи системи заряджання (наприклад, індикатор акумулятора не горить, рівеньtage reading around 13.5-14.5V).
    • Listen for any unusual noises from the belt or alternator.
DB Electrical Alternator 400-52216 main view

Рисунок 1: Основний view of the DB Electrical Alternator 400-52216. This image shows the overall construction and mounting points of the alternator.

DB Electrical Alternator 400-52216 side view

Малюнок 2: Сторона view of the DB Electrical Alternator 400-52216, highlighting the pulley and fan assembly.

Alternator electrical connector diagram

Figure 3: Diagram of the alternator's electrical connector, showing the 'P', 'IGN', and 'L' terminals for proper wiring.

4. Принципи роботи

The alternator is a key component of your vehicle's charging system. Once the engine starts, the serpentine belt spins the alternator pulley, which in turn rotates the internal rotor. This rotation generates an alternating current (AC) through electromagnetic induction. The internal rectifier then converts this AC into direct current (DC), which is used to power the vehicle's electrical systems and recharge the battery.

Внутрішній обtagРегулятор підтримує стабільний вихідний об'ємtage, typically between 13.5V and 14.5V, to prevent overcharging or undercharging the battery and protect sensitive electronic components.

Video 1: An informational video from DB Electrical showcasing various starter and alternator products. This video provides a general overview of the quality and range of electrical components offered by the brand.

5. Технічне обслуговування

Proper maintenance can extend the life of your alternator and ensure optimal performance:

  • Перевірка ременя: Regularly check the serpentine belt for cracks, fraying, or excessive wear. Ensure it has the correct tension. A loose belt can cause the alternator to undercharge, while an overly tight belt can damage bearings.
  • Електричні підключення: Periodically inspect all electrical connections to the alternator for corrosion or looseness. Clean any corrosion with a wire brush and battery terminal cleaner. Ensure all connections are tight.
  • Здоров'я акумулятора: A weak or failing battery can put extra strain on the alternator. Ensure your battery is in good condition and properly charged.
  • Чистота: Keep the alternator free from excessive dirt, oil, and debris, which can hinder cooling and affect performance.

6. Усунення поширених проблем

СимптомМожлива причинаРішення
Індикатор попередження про батарею увімкненоНесправний генератор, ослаблений/зношений ремінь, несправний об'ємtagелектронний регулятор, проблема з проводкою.Check belt tension and condition. Inspect wiring. Test alternator output and battery voltage. Replace alternator if faulty.
Dim Headlights/Interior LightsAlternator not charging sufficiently, weak battery.Check alternator output. Test battery. Ensure all electrical connections are secure.
Battery Drains FrequentlyГенератор не заряджається, паразитне споживання електроенергії, несправний акумулятор.Verify alternator charging. Perform a parasitic draw test. Test and replace battery if necessary.
Скрегіт або верескWorn alternator bearings, loose/worn serpentine belt.Inspect belt for wear and proper tension. If noise persists, alternator bearings may be failing, requiring replacement.

If troubleshooting steps do not resolve the issue, it is recommended to seek professional assistance from a certified mechanic.

7. Технічні характеристики продукту

СпецифікаціяЗначення
ВиробникDB Electrical
Номер моделі400-52216
томtage12 вольт
Ampераж55 Amps
ОбертанняЗа годинниковою стрілкою (CW)
Тип регулятораInternal Regulator (IR)
Тип вентилятораInternal Fan (IF)
Вага товару9 фунта
Номери деталей OEM021080-1190, 101211-2960, 101211-2961

8. Гарантія та підтримка

This DB Electrical Alternator 400-52216 comes with a Гарантія 1 рік from the date of purchase, protecting you against manufacturing defects and material failures under normal use.

For warranty claims, technical assistance, or product inquiries, please contact DB Electrical customer support. Ensure you have your purchase receipt and product model number available when contacting support.

DB Electrical Customer Support:

  • Webсайт: www.dbelectrical.com (Hypothetical, as no direct link was provided in input)
  • Електронна пошта: Refer to the official DB Electrical webсайт для контактної інформації.
  • телефон: Refer to the official DB Electrical webсайт для контактної інформації.

Always refer to the official DB Electrical website or your purchase documentation for the most current and accurate warranty terms and support contact details.

Пов'язані документи - 400-52216

попередньоview Delco 3-Wire Alternator Installation Guide for 12-Volt Negative Ground Systems
Step-by-step instructions from Vintage Auto Garage for installing a Delco 3-wire alternator on 12-volt negative ground vehicles, replacing older generator systems. Includes wiring diagrams and safety precautions.
попередньоview Безболісна проводка! Інструкції з встановлення джгута проводів
Вичерпний посібник з встановлення автомобільних джгутів проводів Painless Wiring!, що охоплює різні моделі автомобілів та електричні системи. Містить детальні кроки, схеми та поради щодо усунення несправностей.
попередньоview Carrier Transicold X4 Prime Option Electrical Connection Instructions
Technical instructions from Carrier Transicold detailing the electrical connections for Prime Option components on X4 models, including Door Switch, Fuel Level Sensor, Light Bar, Power Control Switch, and TPIS. Includes diagrams and connection details.
попередньоview Інструкція з експлуатації та інструкції до тестера акумуляторів ToolIt DBT 400
Вичерпний посібник користувача для тестера акумуляторів ToolIt DBT 400, що охоплює інструкції з безпеки, підключення, тестування акумуляторів, перевірку системи генератора змінного струму, технічне обслуговування та гарантійну інформацію. Підтримується кількома мовами.
попередньоview Carrier Transicold Vector 8500 Installation Instructions for Trailer and Rail Units
Comprehensive installation guide for Carrier Transicold Vector 8500 reefer units on trailers and rail cars, covering unit mounting, battery installation, electrical specifications, and component details.
попередньоview Новий генератор змінного струму Vetus M3.28/M3.29: Керівництво з встановлення та підключення
Лист технічної підтримки від Vetus з детальним описом заміни генератора змінного струму STM7437 на нову модель для суднових двигунів M3.28 та M3.29, включаючи переліки деталей та інструкції з підключення.