Enbrighten Color-Changing LED Lamp Посібник користувача моделі 48080

вступ

The Enbrighten Tabletop Lamp provides soothing, color-changing illumination. Featuring a frosted bowl design, this lamp offers both ambient lighting and a modern aesthetic. It includes three white light brightness levels and 12 color-changing options, all controlled by touch-activated technology. The energy-efficient LED is designed for long-term use without replacement.

особливості

• Сучасний дизайн: Elegantly designed frosted-bowl lamp suitable for various rooms including bedrooms, bathrooms, kitchens, or living rooms.
• Сенсорне керування: Intuitive capacitive touch technology allows selection between three levels of soft white light or a wide array of color options.
• Параметри кольору: Choose from 12 preset colors (e.g., blue, green, violet) or enable an automatic color-cycling mode.
• Живлення від USB: Includes a USB cord for flexible power options. Connect the barrel end to the lamp and the USB-A connector to a compatible port or wall adapter (adapter not included).
• Світлодіодний термін служби: Product features energy-efficient LEDs that do not require replacement.

Налаштування

1. Підключіть живлення: Insert the barrel end of the included USB power cord into the power port located on the back of the lamp.
2. Плагін: Connect the USB-A end of the power cord into a standard USB-A power adapter (not included) or a compatible USB-A port. Plug the adapter into a wall outlet.

Image: Enbrighten Color-Changing LED Lamp with dimensions and USB cable for power connection.

Інструкція з експлуатації

1. Увімкнути/вимкнути: Lightly tap the metallic center circle on the top of the lamp to turn it on. To turn it off, press and hold the center circle for approximately 3 seconds. The lamp will remember the last setting used when turned back on.
2. Change White Light Brightness: Коли lamp is in white light mode, tap the center circle repeatedly to cycle through three brightness levels: high, medium, and low.
3. Активувати режим зміни кольору: Continue tapping the center circle after cycling through the white light brightness levels to enter the color-changing mode.
4. Select a Static Color: While in color-changing mode, tap the center circle to pause on your desired color. There are 12 static color options available.

Image: Demonstrates the touch control feature on the lamp's top surface.

Image: Illustrates the three dimmable white light settings of the lamp.

Image: Displays the lamp cycling through various color options.

Технічне обслуговування

The Enbrighten Color-Changing LED Lamp is designed for minimal maintenance. The integrated LED light source is long-lasting and does not require replacement. To clean the lamp, gently wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.

Усунення несправностей

• Lamp не вмикається: Ensure the USB power cord is securely connected to both the lamp and a functioning USB power adapter/port. Verify the power adapter is plugged into a live electrical outlet.
• Colors are not changing: Tap the metallic center circle to cycle through modes. If stuck on a white light setting, continue tapping until color-changing mode is activated.
• Переривчаста робота: Check all power connections for looseness. Ensure the lamp розміщується на стійкій поверхні.

Технічні характеристики

Гарантія та підтримка

This Enbrighten LED Lamp comes with a limited-lifetime warranty. For warranty claims or technical support, please contact Jasco Products Company, LLC, the manufacturer. Refer to the product packaging or the official Enbrighten website for detailed contact information and warranty terms.