Комплект бездротового адаптера для сабвуфера KEF KW1TXRX Інструкція користувача

1. Вступ

The KEF KW1TXRX Wireless Subwoofer Adapter Kit provides a high-quality, wireless audio connection for compatible KEF subwoofers. This kit allows for flexible placement of your subwoofer without the need for long, unsightly cables, ensuring optimal sound performance and room aesthetics. Operating in the 5GHz band, the KW1TXRX delivers audio up to 24bit/48kHz with minimal latency, preserving the detail and impact of your audio.

Що в коробці

• Бездротовий передавач
• Бездротовий приймач
• USB кабель
• RCA кабель
• RCA адаптер

Ключові характеристики

• Wireless subwoofer kit, compatible with KEF Kube8b, Kube10b, Kube12b, and KF92 Subwoofers.
• High-quality wireless transmission delivers every ounce of detail and impact from your favourite films and music.
• Operates in the high-bandwidth 5GHz band, delivering audio up to 24bit/48kHz.
• Features a range of up to 30m (line of sight) making optimal placement easy.
• Designed with latency of less than 17ms.

2. Інформація про безпеку

Будь ласка, прочитайте та зрозумійте всі інструкції з техніки безпеки перед використанням цього виробу. Зберігайте цей посібник для подальшого використання.

• Не піддавайте пристрій впливу дощу, вологи, крапель або бризок.
• Не ставте на пристрій предмети, наповнені рідиною, наприклад вази.
• Забезпечте належну вентиляцію; не блокуйте вентиляційні отвори.
• Використовуйте лише насадки/аксесуари, зазначені виробником.
• Disconnect the device during lightning storms or when unused for long periods.
• Звертайтеся до кваліфікованого сервісного персоналу.

3. Налаштування та встановлення

Image: The KEF KW1TXRX Wireless Subwoofer Adapter Kit, showing both the transmitter (left) and receiver (right) units. Both are compact, black, and feature the KEF logo.

Зображення: Задня частина view of the KEF KW1TXRX transmitter unit. It features a 'PAIR' button, 'LINE IN' RCA inputs (white and red), and a 5V==1A USB power input.

Підключення передавача

1. Connect the provided USB cable to the 5V==1A port on the transmitter unit. Connect the other end of the USB cable to a suitable USB power source (e.g., a USB wall adapter, not included, or a USB port on your audio source device if available).
2. Using the supplied RCA cable and adaptor, connect the 'LINE IN' RCA inputs on the transmitter to the subwoofer output (LFE or Sub Out) of your audio source (e.g., AV receiver, pre-amplifier). Ensure correct polarity (red to red, white to white if applicable, or use the single LFE connection).
3. Place the transmitter in a location that allows for a clear line of sight to the receiver, ideally within 30 meters.

Підключення приймача

Image: The KEF KW1TXRX receiver unit is shown attached to the rear panel of a KEF KF92 subwoofer. The receiver plugs directly into a dedicated port on the subwoofer.

Зображення: Крупний план view of the KEF KW1TXRX receiver unit plugged into the back of a KEF Kube series subwoofer. The receiver is designed to integrate seamlessly with compatible KEF subwoofers.

1. The receiver unit is designed to plug directly into compatible KEF subwoofers (Kube8b, Kube10b, Kube12b, KF92) via a dedicated port. Align the receiver with the port on your subwoofer and gently push it in until it is securely seated.
2. Ensure the subwoofer is powered on. The receiver draws power directly from the subwoofer.

Pairing the Units

The transmitter and receiver units are typically pre-paired from the factory. If they do not connect automatically, follow these steps to manually pair them:

1. Переконайтеся, що передавач і приймач увімкнено.
2. Press and hold the 'PAIR' button on the transmitter unit for a few seconds until its indicator light begins to flash.
3. Within 30 seconds, press and hold the 'PAIR' button on the receiver unit (located on the side or top, depending on the model) until its indicator light also begins to flash.
4. Once both lights stop flashing and remain solid, the units are successfully paired.

4. Операція

Once the KEF KW1TXRX units are set up and paired, they will automatically establish a wireless audio link when powered on. The system operates on the 5GHz frequency band to minimize interference and ensure stable, high-fidelity audio transmission.

• Якість звуку: The system supports audio transmission up to 24-bit/48kHz, ensuring that the subwoofer receives a high-resolution signal.
• Затримка: With a latency of less than 17ms, the audio signal is transmitted with minimal delay, ensuring synchronization with your main speakers.
• діапазон: The effective operating range is up to 30 meters (line of sight). Obstacles suchs as walls or large furniture may reduce this range.

5. Технічне обслуговування

To ensure the longevity and optimal performance of your KEF KW1TXRX Wireless Subwoofer Adapter Kit, follow these simple maintenance guidelines:

• Прибирання: Use a soft, dry cloth to wipe the surfaces of the transmitter and receiver. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the finish or internal components.
• Розміщення: Avoid placing the units in direct sunlight, near heat sources, or in areas with high humidity or extreme temperatures.
• Зберігання: If storing the units for an extended period, disconnect them from power and store them in a cool, dry place.
• Обробка: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.

6. Вирішення проблем

If you encounter issues with your KEF KW1TXRX kit, please refer to the following common troubleshooting steps:

7. Технічні характеристики

8. Гарантія та підтримка

For warranty information and technical support, please refer to the official KEF website or contact KEF customer service directly. Keep your proof of purchase for any warranty claims.

Інтернет-ресурси: Відвідайте us.kef.com для реєстрації продукту, поширених запитань та додаткових допоміжних матеріалів.