DEWENWILS Plug-in Dimmer Switch (Model J-45B) Instruction Manual

вступ

Thank you for choosing the DEWENWILS Plug-in Dimmer Switch. This device allows you to easily adjust the brightness of your lamps, creating the desired ambiance in any room. It is compatible with dimmable LED/CFL bulbs up to 100W and incandescent bulbs up to 300W. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Інформація про безпеку

• Тільки для використання в приміщенні. Не піддавайте впливу води абоamp умови.
• Забезпечте загальну ватtage of connected bulbs does not exceed the dimmer's maximum capacity (100W for dimmable LED/CFL, 300W for incandescent).
• Only use with dimmable bulbs. Non-dimmable bulbs may flicker or be damaged.
• Do not disassemble or modify the dimmer switch.
• Зберігати в недоступному для дітей місці.
• Unplug the dimmer from the wall outlet before connecting or disconnecting any lamp.

Особливості продукту

• Сумісність: Works with dimmable LED/CFL bulbs (up to 100W) and incandescent bulbs (up to 300W).
• Повнодіапазонне затемнення: Smooth slide control for stepless brightness adjustment from 0% to 100%.
• Легка установка: Plug-and-play design requires no wiring.
• Подовжувач: Features a 5-foot control cable for convenient placement.
• Міцна конструкція: Made from plastic material.

Вміст упаковки

• 1 x DEWENWILS Plug-in Dimmer Switch (Model J-45B)

Налаштування

1. Ensure the dimmer switch is in the "OFF" position by sliding the control all the way down.
2. Підключіть свій лamp's power cord into the receptacle on the DEWENWILS dimmer switch.
3. Plug the dimmer switch's power plug into a standard 120V AC wall outlet.

малюнок 1: Components of the DEWENWILS Plug-in Dimmer Switch. This image illustrates the lamp plug, the wall socket plug, the 5-foot control cable, and the stepless adjustment knob on the dimmer unit.

малюнок 2: The dimmer switch connected to a lamp and a wall outlet. The lamp's cord plugs into the dimmer, and the dimmer then plugs into the wall.

Інструкція з експлуатації

To operate the dimmer switch:

1. Once connected, slide the control knob upwards to turn on the light and gradually increase brightness.
2. Slide the control knob downwards to gradually dim the light.
3. Slide the control knob all the way down to the "OFF" position to turn off the light completely.

малюнок 3: Demonstrating the stepless dimming function. A hand slides the control to adjust the light from off (0%) to full brightness (100%).

малюнок 4: User operating the dimmer switch. The 5-foot cable allows for convenient placement of the control unit.

Сумісність

This dimmer switch is designed for use with specific bulb types and wattages:

• Дімовані світлодіодні/компактні люмінесцентні лампи: Up to 100 Watts. Ensure your LED or CFL bulbs are explicitly labeled as "dimmable".
• Лампи розжарювання: До 300 Вт.

Important: Do not use with non-dimmable LED/CFL bulbs, smart bulbs, or other non-compatible lighting. Using incompatible bulbs may cause flickering, damage to the bulb or dimmer, or improper operation.

малюнок 5: Bulb compatibility chart. This dimmer supports dimmable LED/CFL bulbs up to 100W and incandescent bulbs up to 300W.

Технічне обслуговування

The DEWENWILS Plug-in Dimmer Switch requires minimal maintenance.

• To clean, unplug the dimmer from the wall outlet and wipe with a dry, soft cloth.
• Не використовуйте рідкі засоби для чищення або абразивні матеріали.
• Ensure the dimmer is completely dry before plugging it back into a power source.

Усунення несправностей

Технічні характеристики

Гарантія та підтримка

This DEWENWILS product comes with a Гарантія 1 рік з дати покупки.

For technical support, warranty claims, or any questions regarding your product, please contact DEWENWILS customer service. Refer to the contact information provided on the product packaging or the official DEWENWILS webсайт.