ChunHee Wireless Dog Doorbell User Manual

вступ

Thank you for choosing the ChunHee Wireless Dog Doorbell. This device is designed to assist with pet potty training and can also serve as a versatile doorbell for homes or a paging device for caregivers. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a positive user experience.

Зображення: Оверview of the ChunHee Wireless Dog Doorbell system, showing two receivers and two transmitters.

Вміст упаковки

Будь ласка, перевірте наявність усіх предметів у вашій упаковці:

• Приймач x 2
• Передавач x 3
• Double-sided adhesive stickers x 3
• Посібник користувача x 1
• 12V 23A Battery x 3
• Набір гвинтів x 1

Особливості продукту

• Легка активація: Dogs can activate the wireless doorbell by lightly touching or sliding on the touch pad with their nose or paw. Suitable for dogs and cats of all sizes.
• Бездротовий діапазон: Maximum working range of 150 meters (approximately 492 feet) in an open area.
• Melody Options: 52 distinct ringtones available. Users can set any preferred melody as the doorbell chime.
• Регульована гучність: 5 volume levels (0-110dB), including a unique silent mode.
• Світлодіодний індикатор: Visual flash indicator for those with hearing impairment.
• Міцний дизайн: IP55 waterproof and dustproof transmitter, allowing installation near doors. Avoid prolonged submersion in water.
• Універсальне використання: Can be used as a standard doorbell for homes, apartments, offices, and villas, or as a paging device for elderly individuals.

Image: A dog activating the doorbell transmitter, illustrating the easy trigger feature.

Налаштування та встановлення

Передавач Установка

The dog doorbell does not require wiring. It can be affixed to a door or wall using the provided 3M double-sided adhesive tape or the screw set.

• Ретельно очистіть бажану поверхню для встановлення, щоб переконатися, що вона без пилу та жиру.
• Peel off one side of the 3M double-sided adhesive tape and apply it to the back of the transmitter.
• Peel off the other side of the tape and firmly press the transmitter onto the chosen surface (door, wall, or glass).
• Alternatively, use the screw set to mount the transmitter for a more permanent installation.

Розміщення ресивера

The receiver plugs into a standard electrical outlet and does not require batteries for operation. Place the receiver in a location where the chime can be clearly heard, such as the kitchen or bedroom.

Зображення: Прamples of transmitter installation on a door and glass, and receiver in use.

Інструкція з експлуатації

Adjusting Volume and Melodies

• Регулювання гучності: Press the volume button on the side of the receiver to cycle through 5 volume levels (0-110dB). The silent mode (0dB) will only activate the LED flash.
• Вибір мелодії: Use the forward/backward buttons on the receiver to browse through the 52 available ringtones.

Pairing Additional Transmitters/Receivers

The system supports adding more receivers or transmitters. Follow these steps to pair new components:

1. Place the transmitter next to the receiver and plug in the receiver.
2. Press and hold both the volume button and the melody selection button simultaneously for 5 seconds until the receiver's indicator light flashes blue rapidly.
3. While the receiver light is flashing, press the button on the transmitter. The receiver will chime, indicating successful pairing.

Зображення: Детальне view of the receiver's controls for volume, pairing, and melody selection.

Технічне обслуговування

• Прибирання: Wipe the doorbell components with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Заміна батареї (передавач): The transmitter uses a 12V 23A alkaline battery. Replace the battery when the signal strength weakens or the transmitter stops functioning. To replace, open the transmitter casing, remove the old battery, and insert a new one, ensuring correct polarity.
• Водонепроникність: The transmitter is IP55 waterproof, meaning it is protected against dust and low-pressure water jets. Do not submerge the transmitter in water for extended periods.

Усунення несправностей

• Немає звуку з приймача:
  • Ensure the receiver is properly plugged into a working electrical outlet.
  • Check if the receiver is in silent mode (0dB). Press the volume button to increase the volume.
  • Verify that the transmitter battery is not depleted. Replace if necessary.
  • Re-pair the transmitter and receiver following the "Pairing Additional Transmitters/Receivers" steps.
• Shortened Transmission Range:
  • Metal objects can interfere with the wireless signal. Avoid placing the transmitter near large metal surfaces.
  • Ensure there are no significant obstructions (thick walls, large appliances) between the transmitter and receiver.
  • Check the transmitter battery. A low battery can reduce range.
• Transmitter Not Activating:
  • Ensure the transmitter battery is correctly installed and not depleted.
  • Confirm the transmitter and receiver are properly paired.
  • Check for physical damage to the transmitter.

Технічні характеристики

Image: Visual representation of the doorbell's wireless range and IP55 waterproof rating.

Інформація про гарантію

ChunHee products are designed for reliability and performance. For specific warranty details, including coverage period and terms, please refer to the warranty card included in your product packaging or visit the official ChunHee webсайт. Будь ласка, збережіть підтвердження покупки для будь-яких гарантійних претензій.

Підтримка клієнтів

If you encounter any issues or have questions regarding your ChunHee Wireless Dog Doorbell that are not addressed in this manual, please contact our customer support team. You can find contact information on the official ChunHee webсайт або через вашу платформу для покупок.

Ми прагнемо надавати відмінний сервіс та підтримку для наших продуктів.