1. Вступ
The AGSHOME D-Motion Sensor is designed to enhance the security of your smart home. This device detects movement within its sensing area and sends an alarm signal to your AGSHOME Smart Home Security System HUB. It operates wirelessly and is powered by batteries, offering flexible placement options.
Важлива примітка: This D-Motion Sensor functions exclusively with the AGSHOME Smart Home Security System HUB. It cannot operate as a standalone device.
Image 1: AGSHOME D-Motion Sensor. A compact white motion sensor with a blue indicator light, designed for discreet placement within a home environment.
2. Налаштування
2.1. Встановлення батареї
The D-Motion Sensor is powered by 2 AA R6 1.5V batteries (included). Ensure correct polarity when inserting the batteries.
2.2. Розміщення
Strategically place the motion sensor in areas where movement detection is crucial, such as entryways, hallways, or rooms with valuables. The sensor operates completely wirelessly, allowing for flexible installation without the need for cables.
Image 2: Installation of AGSHOME Motion Sensor. A person wearing gloves is shown mounting a white motion sensor device on a wall, demonstrating the ease of installation.
2.3. Pairing with the AGSHOME Smart Home Security System HUB
The D-Motion Sensor must be paired with your AGSHOME Smart Home Security System HUB to function. Refer to your HUB's instruction manual or the AGSHOME app for detailed pairing instructions. The sensor has a Root antenna to improve signal strength during pairing and operation.
Video 1: YISEELE Alarm Connection Method. This video demonstrates the general process of connecting an alarm system, which may include pairing sensors like the D-Motion Sensor to a central HUB.
3. Операція
3.1. Виявлення руху
Once installed and paired, the D-Motion Sensor will capture any movement within its detection area. Upon detection, it will trigger an alarm.
3.2. Сигнал тривоги
When movement is detected, an alarm signal is immediately sent to your AGSHOME Smart Home Security System HUB. The HUB will then initiate its programmed alarm responses, such as sounding a siren or sending notifications to your smartphone via the associated app.
Image 3: AGSHOME Motion Sensor in action. An illustration showing a motion sensor detecting an intruder in a living room, highlighting its security function.
3.3. Системний контроль
Your AGSHOME Smart Home Security System, which the D-Motion Sensor integrates with, can typically be controlled via:
- Пульт дистанційного керування: Use the provided remote controls to arm or disarm the system.
- RFID Key Fobs: Tap an RFID key fob on the system's keypad for quick arming/disarming.
- Додаток для смартфона: Utilize the dedicated smartphone application for full control, including arming/disarming, checking event logs, and customizing settings.
Video 2: PG108 Alarm System Operation Tutorial. This video provides a comprehensive guide on operating a smart alarm system, including arming, disarming, and managing settings via the control panel and smartphone app.
4. Технічне обслуговування
4.1. Заміна батареї
The D-Motion Sensor is powered by 2 AA R6 1.5V batteries. When the battery level is low, your AGSHOME Smart Home Security System HUB or app may notify you. Replace the batteries promptly to ensure continuous operation.
Video 3: Sensor Battery Replacement Tutorial. This video demonstrates how to change the battery in a PIR detector and a door sensor, providing clear visual instructions for maintenance.
4.2. прибирання
Wipe the sensor's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the device.
5. Вирішення проблем
- Датчик не виявляє руху: Ensure the sensor is placed in an optimal location without obstructions. Check battery levels and replace if necessary. Verify the sensor is properly paired with the HUB.
- Хибні тривоги: Adjust the sensor's sensitivity settings if available through the HUB or app. Ensure the sensor is not exposed to direct sunlight, strong air currents, or pets that might trigger it.
- No alarm signal to HUB: Check the sensor's battery. Ensure the sensor is within the wireless range of the HUB. Verify the HUB is powered on and connected to your network.
6. Технічні характеристики
- Номер моделі: G-Détecteur de mouvement
- Розміри: 7 х 5 х 2 см
- вага: 100 г
- Джерело живлення: 2 AA R6 1.5V batteries (included)
- Спосіб встановлення: Бездротовий самостійний монтаж
- Сумісні пристрої: AGSHOME Smart Home Security System HUB
7. Гарантія та підтримка
For warranty information and technical support, please refer to the documentation provided with your AGSHOME Smart Home Security System HUB or visit the official AGSHOME website. You can also contact AGSHOME customer service directly for assistance.
