1. Вступ
This manual provides detailed instructions for the installation, operation, and maintenance of your DIGITUS DN-10132 Dual-Port Gigabit Ethernet PCIe Network Card. This card is designed to add two Gigabit Ethernet ports to a server or workstation via a single PCI Express slot. It features an integrated Intel chipset and supports various network protocols and functions for versatile use in virtual machine environments or for router/firewall setups.

Зображення 1.1: закінченоview of the DIGITUS DN-10132 Dual-Port Gigabit Ethernet PCIe Network Card.
2. Вміст упаковки
Перевірте наявність усіх елементів в упаковці:
- PCI Express Dual Gigabit Ethernet Card, 2 ports
- Низькопрофесійнийfile прорізний кронштейн
- CD з драйверами
- Посібник із швидкої установки (QIG)

Image 2.1: The included low-profile bracket, allowing installation in compact computer cases.
3. Налаштування та встановлення
Follow these steps to install the DIGITUS DN-10132 network card into your computer system.
- Вимкнення та відключення: Before beginning, ensure your computer is completely powered off and disconnected from the power source.
- Відкрити корпус комп'ютера: Open the computer case to access the motherboard's PCI Express slots.
- Select PCI Express Slot: Locate an available PCI Express X1 slot or higher (X4, X8, X16) on your motherboard.
- Зняти кришку слота: Зніміть металеву кришку слота із задньої панелі корпусу комп'ютера, що відповідає вибраному слоту PCIe.
- Встановлення мережевої карти: Carefully align the network card with the chosen PCIe slot and press it firmly until it is securely seated.
- Безпечна картка: Secure the network card with a screw or the case's retention mechanism. If installing in a compact case, replace the standard bracket with the provided low-profile кронштейн перед встановленням.
- Закрити корпус комп'ютера: Закрийте корпус комп’ютера та знову під’єднайте всі кабелі.
- Увімкнення живлення та встановлення драйвера: Power on your computer. Insert the provided driver CD and follow the on-screen instructions to install the necessary drivers for your operating system. Alternatively, download the latest drivers from the DIGITUS support webсайт.

Image 3.1: The network card correctly installed in a PCI Express slot within a computer chassis.
4. Інструкція з експлуатації
Once the DIGITUS DN-10132 network card is installed and drivers are loaded, it will function as a standard network interface.
- Підключення мережевих кабелів: Connect standard RJ45 Ethernet cables to the two available ports on the card. The card supports 10/100/1000 Mbps speeds.
- Конфігурація мережі: Configure network settings (IP address, DNS, etc.) through your operating system's network settings. The card supports IPv4 and IPv6 protocols.
- Розширені функції:
- Підтримка VLAN: The card supports IEEE 802.1q VLANs, allowing for network segmentation.
- Контроль потоку: IEEE 802.3x Flow Control is supported for efficient data transfer.
- Рамки Jumbo: Supports jumbo frames up to 9.5K for improved network performance with large data packets.
- Receive Side Scaling (RSS): Enhances network processing efficiency by distributing network load across multiple CPU cores.
- Virtual Machine Device Queues (VMDq): Optimizes network performance for virtualized environments by offloading data sorting and copying tasks from the hypervisor.

Image 4.1: The two RJ45 ports for network cable connection.
5. Технічне обслуговування
The DIGITUS DN-10132 network card is designed for reliable operation with minimal maintenance.
- Оновлення драйверів: Periodically check the DIGITUS website for updated drivers to ensure optimal performance and compatibility with the latest operating system versions.
- Фізичний огляд: Occasionally inspect the card for dust accumulation, especially on the heatsink. Use compressed air to gently clean if necessary, ensuring the computer is powered off and disconnected.
- Умови навколишнього середовища: Ensure the computer operates within recommended temperature and humidity ranges to prevent component degradation.
6. Вирішення проблем
If you encounter issues with your DIGITUS DN-10132 network card, refer to the following common troubleshooting steps:
- Немає підключення до мережі:
- Verify that the Ethernet cables are securely connected to both the network card and the network device (router/switch).
- Check the network status indicators (LEDs) on the RJ45 ports. If they are off, ensure the card is properly seated in the PCIe slot and drivers are installed.
- Confirm that network settings in your operating system are correctly configured (IP address, subnet mask, gateway, DNS).
- Try a different Ethernet cable or port on your network device.
- Низька швидкість мережі:
- Ensure your network infrastructure (cables, router/switch) supports Gigabit Ethernet speeds.
- Update the network card drivers to the latest version.
- Check for network congestion or other devices consuming bandwidth on your network.
- Card Not Detected by OS:
- Ensure the card is fully seated in the PCI Express slot.
- Verify that the correct drivers for your operating system have been installed from the provided CD or DIGITUS webсайт.
- Try installing the card in a different PCI Express slot if available.
- Check your system's Device Manager (Windows) or equivalent to see if the card is listed, even with an error.
- System Instability After Installation:
- Ensure your system's power supply is adequate for all installed components.
- Verify that the card is compatible with your motherboard's PCI Express version.
- Reinstall drivers or try an older driver version if available.
7. Технічні характеристики
| Бренд | ДИГІТУС |
| Номер моделі | DN-10132 |
| Порти | 2 х RJ45 |
| Швидкість передачі | 1 Gbps per port (backward compatible with 10/100 Mbps) |
| Чіпсет | Intel 82575EB (JL82575EB) |
| Слот PCIe | PCI Express X1 (compatible with X4, X8, X16 slots) |
| Апаратний інтерфейс | Ethernet |
| Протокол зв'язку даних | Ethernet, Gigabit Ethernet, IEEE 802.1Q, IEEE 802.3 |
| Підтримувані операційні системи | Windows 7, 8, 8.1, 10, Windows Server 2008, 2012, 2016, 2019, FreeBSD, Linux, VMWare ESXi |
| Функції рівня 2 | IEEE 802.3x Flow Control, IEEE 802.1q VLAN |
| Додаткові функції | Auto MDI/MDIX, RSS (Receive Side Scaling), IPv4/IPv6 support, Jumbo Frames (up to 9.5K), UDP/TCP/IP Checksum Offloading, VMDq (Virtual Machine Device Queues) |
| Розміри (Д x Ш x В) | 22 x 15.5 x 3 см (приблизно) |
| Вага продукту | 1 Gram (approximate) |
8. Інформація про гарантію
The DIGITUS DN-10132 network card comes with a 2-year legal manufacturer's warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your product or visit the official DIGITUS webсайт.
9. Підтримка та контакти
For further assistance, technical support, or to download the latest drivers, please visit the official DIGITUS webсайту або зв’яжіться з їхньою службою обслуговування клієнтів.
- Офіційний Webсайт: Assmann Solutions Overview (Parent company of DIGITUS)
- Фірмовий магазин: DIGITUS Amazon Store





