1. Вступ
The Dualsky FC151 is a compact 6-axis flight control system designed for RC airplanes and quadcopters. It integrates a 3-axis gyroscope and a 3-axis accelerometer to provide advanced attitude stabilization. This manual provides essential information for the proper setup, operation, and maintenance of your FC151 unit.
Image 1.1: Dualsky FC151 Flight Control unit with indicated dimensions (36mm length, 27.5mm width, 12mm height).
2. Ключові характеристики
- 6-осьова стабілізація: Combines 3-axis gyroscope and 3-axis accelerometer for precise flight control.
- Компактний дизайн: Mini dimension, weighing only 8 grams.
- Висока продуктивність: Equipped with a 32-bit high-performance ARM MCU.
- Розширений алгоритм: Utilizes an original advanced attitude stabilization algorithm.
- Aircraft Compatibility: Supports single/double aileron, fly wing, and V-tail aircraft.
- Flaperon Mixing: Integrated support for flaperon mixing.
- Режими польоту: Supports aerobatic/3D airplanes and auto-level functionality.
- Регульована чутливість: Independent sensitivity adjustment for all 3 axes.
- S.BUS Support: Compatible with Futaba S.BUS protocol.
- Перемикання режимів: Allows mode switching via an extra channel.
- Легке програмування: Programmed via a single button and LED indicators.
- HV Input Support: Compatible with High Voltage (HV) inputs.
3. Вміст упаковки
Після відкриття упаковки переконайтеся, що всі компоненти є в наявності та не пошкоджені:
- Dualsky FC151 Flight Control Unit
- Connecting Cables (if included, not explicitly listed but implied for installation)
- Інструкція з експлуатації (цей документ)
Image 3.1: The Dualsky FC151 Flight Control unit shown within its retail packaging.
4. Налаштування та встановлення
4.1 Фізичне встановлення
Mount the FC151 unit securely in your RC aircraft or quadcopter. Ensure it is oriented correctly according to the "HEAD DIRECTION" arrow on the unit. The compact size allows for flexible placement, but avoid areas with excessive vibration or electromagnetic interference.
Зображення 4.1: Верх view of the FC151 unit, highlighting the 'HEAD DIRECTION' indicator and adjustment points for AIL, ELE, RUD.
4.2 Підключення проводів
Connect the FC151 to your receiver and servos using appropriate cables. The unit features clearly labeled ports for system power (SYS), aileron (AIL1, AIL2), elevator (ELE), rudder (RUD), and mode selection (MODE). If using S.BUS, refer to your receiver's manual for proper connection to the FC151's S.BUS port.
Image 4.2: The FC151 unit displaying its various input and output ports for connection to a receiver and servos.
4.3 Control Surface Types and Mixing
The FC151 supports various aircraft configurations. Ensure your transmitter is set up correctly for the chosen aircraft type, and then configure the FC151 accordingly. The unit supports:
- Single Aileron Aircraft
- Double Aileron Aircraft
- Fly Wing Aircraft (Delta Wing)
- V-Tail Aircraft
Flaperon mixing is also supported. Refer to the diagram below for visual guidance on control surface configurations.
Image 4.3: Diagram showing typical control surface setups for single/double aileron, V-tail, and fly wing aircraft.
4.4 Регулювання чутливості
The FC151 allows independent sensitivity adjustment for aileron (AIL), elevator (ELE), and rudder (RUD) axes. Use a small screwdriver to carefully adjust the potentiometers labeled AIL, ELE, and RUD on the top of the unit. Start with lower sensitivity settings and gradually increase as needed during test flights to achieve desired stability without overcorrection.
4.5 Flight Mode Selection
The FC151 supports different flight modes, including auto-level and modes suitable for aerobatic/3D flying. These modes can be switched via an extra channel on your transmitter, connected to the FC151's MODE input. Consult the LED indicators for current mode status.
5. Операція
Once installed and configured, the FC151 will provide stabilization during flight. The system continuously monitors the aircraft's attitude and makes rapid corrections to maintain stability. For advanced users, programming via the onboard button and LEDs allows for fine-tuning of parameters. Refer to the specific programming sequence detailed in the full product manual (if available) or Dualsky's official webсайт для детальних кроків.
Ensure your transmitter is properly calibrated and all control surfaces respond correctly before attempting flight.
6. Технічне обслуговування
- Прибирання: Тримайте пристрій чистим та без пилу та сміття. Використовуйте м’яку суху тканину для очищення.
- Огляд: Periodically inspect all wiring connections for looseness or damage.
- Умови навколишнього середовища: Уникайте тривалого впливу екстремальних температур, вологи або прямих сонячних променів на пристрій.
- Прошивка: Check the Dualsky official webсайт для отримання будь-яких доступних оновлень прошивки.
7. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| No power to FC151 | Incorrect wiring, faulty power source, damaged cable. | Check all power connections. Ensure battery is charged. Inspect cables for damage. |
| Unstable flight / Overcorrection | Sensitivity too high, incorrect mounting, vibration. | Reduce sensitivity settings. Re-mount the unit securely. Check for excessive vibrations. |
| Неправильна реакція керування | Incorrect servo direction, wrong aircraft type selected, faulty servo. | Verify servo directions in transmitter. Confirm correct aircraft type setting on FC151. Test servos independently. |
| Не працює перемикання режимів | Extra channel not configured, incorrect wiring to MODE input. | Ensure transmitter channel is assigned and connected correctly to the FC151 MODE input. |
8. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | Дуальський |
| Назва моделі | FC151 |
| Тип управління | 6-Axis (3-axis Gyro + 3-axis Accelerometer) |
| MCU | 32-розрядна ARM |
| вага | 8 grams (approximate, based on description) |
| Розміри | 36 мм x 27.5 мм x 12 мм (приблизно, на основі зображення) |
| Підтримувані літаки | Single/Double Aileron, Fly Wing, V-Tail |
| Протоколи | Futaba S.BUS |
| Вхідний об'ємtage | Supports HV inputs (specific voltage range not provided) |
| UPC | 782911429230 |
9. Гарантія та підтримка
For warranty information, please refer to the official Dualsky website or contact your authorized Dualsky dealer. Product support and additional resources, including detailed programming guides, may be available on the manufacturer's webсайт:
For specific inquiries or technical assistance, please contact Dualsky customer service.
The GTIN/UPC for this product is 6941047114364.
