1. Вступ
This manual provides essential information for the proper installation, operation, and maintenance of your Alpine SXE-1751S 6.5-inch 2-Way Component Speaker System. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety.
The Alpine SXE-1751S is designed to deliver high-quality audio reproduction in a vehicle environment, featuring a separate woofer and tweeter for enhanced sound staging and clarity.
2. Інформація про безпеку
- Електрична безпека: Завжди від'єднуйте негативну клему акумулятора автомобіля перед початком будь-яких електромонтажних робіт, щоб запобігти короткому замиканню та ураженню електричним струмом.
- Професійна установка: If you are unsure about any aspect of the installation, it is recommended to seek assistance from a qualified professional installer.
- Електропроводка: Ensure all wiring is properly insulated and secured to prevent damage from vibration or contact with sharp edges. Use appropriate gauge wire for connections.
- Рівні гучності: Prolonged exposure to high volume levels can cause hearing damage. Adjust the volume to a comfortable level.
- Монтаж: Надійно закріпіть усі компоненти, щоб запобігти їхньому розхитуванню під час експлуатації транспортного засобу, що може призвести до травм або пошкоджень.
3. Що в коробці
Your Alpine SXE-1751S Component Speaker System package includes the following standard components:
- Два 6.5-дюймових низькочастотних динаміки
- Два твітери
- Кріпильні елементи (гвинти, кліпси тощо)
- Решітки динаміків (якщо є)

Image: The Alpine SXE-1751S component speaker system, showing two 6.5-inch woofers and two separate tweeters with their wiring.
4. Налаштування та встановлення
Proper installation is crucial for optimal sound performance. Consider professional installation if you are unfamiliar with car audio wiring and vehicle disassembly.
4.1. Планування встановлення
- Розташування: Determine suitable mounting locations for the woofers and tweeters in your vehicle. Woofers are typically installed in door panels or kick panels, while tweeters are often mounted higher, such as on the dashboard or A-pillars, for better sound imaging.
- оформлення: Ensure there is sufficient mounting depth and clearance behind the speaker locations for the woofer magnets and tweeter bodies.
- Шлях проводки: Plan the routing of speaker wires from your amplifier/head unit to the speaker locations, avoiding sharp edges and moving parts.
4.2. Встановлення низькочастотного динаміка
- Disconnect the vehicle's battery negative terminal.
- Carefully remove the existing speakers or prepare the mounting location. This may involve removing door panels or other interior trim.
- Mount the 6.5-inch woofer securely using the provided screws. Ensure a tight fit to prevent vibrations.
- Connect the speaker wires to the woofer terminals, observing correct polarity (+ to + and - to -).

Image: A single Alpine SXE-1751S 6.5-inch woofer, showing the speaker cone and mounting frame.
4.3. Встановлення високочастотного динаміка
- Choose a suitable mounting method for the tweeters (flush mount, surface mount, or angle mount) based on your vehicle's interior and desired sound direction.
- Secure the tweeter in its chosen location using the appropriate mounting hardware.
- Connect the tweeter wires, ensuring correct polarity. The SXE-1751S tweeters include an integrated crossover network, so no external crossover box is required.

Image: A single Alpine SXE-1751S tweeter, a small black circular unit with a mesh grille and blue and black wires extending from it.
4.4. Підключення проводів
Connect the positive (+) terminal of each speaker to the positive (+) output of your amplifier or head unit, and the negative (-) terminal to the negative (-) output. Incorrect polarity can lead to poor sound quality and reduced bass response.
After all speakers are connected, reassemble any removed vehicle trim and reconnect the vehicle's battery negative terminal.
5. Керування акустичною системою
Once installed, your Alpine SXE-1751S speakers will operate as part of your vehicle's audio system. Follow these general guidelines:
- Початкове відтворення: Почніть з низького рівня гучності та поступово збільшуйте його до комфортного для прослуховування рівня.
- Параметри звуку: Налаштуйте параметри низьких, високих частот і балансу на головному пристрої або amplifier to achieve your preferred sound. The separate tweeters allow for improved sound staging; experiment with your head unit's fader and balance controls.
- Період обкатки: Speakers often benefit from a 'break-in' period of several hours of normal use to achieve their full sonic potential.
6. Технічне обслуговування
The Alpine SXE-1751S speakers require minimal maintenance to ensure long-lasting performance.
- Прибирання: Використовуйте м’яку суху тканину, щоб обережно витерти пил з решіток та конусоподібних динаміків. Уникайте використання агресивних хімікатів або абразивних засобів для чищення.
- Огляд: Періодично перевіряйте міцність з'єднань динаміків та переконайтеся, що дроти не зношені та не оголені.
- Екологічні фактори: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures.
7. Вирішення проблем
Якщо у вас виникли проблеми з акустичною системою, зверніться до наступних поширених проблем та способів їх вирішення:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Немає звуку з динаміків | Нещільне або неправильне підключення проводки; amplifier/head unit issue; speaker damage | Перевірте всі з'єднання проводів на міцність та правильність полярності. ampголовний пристрій/акумулятор увімкнено та працює. Якщо можливо, перевірте його з іншим справним динаміком. |
| Спотворений або нечіткий звук | Incorrect audio settings; speaker overload; damaged speaker; poor wiring connection | Adjust bass/treble settings. Reduce volume to prevent clipping. Check wiring for loose connections or shorts. Inspect speaker cones for physical damage. |
| Слабкий або відсутній бас | Incorrect speaker polarity; phase issues; insufficient power | Verify speaker wire polarity. Ensure speakers are in phase. Check amplifier output and settings. |
| Переривчастий звук | Loose wiring; faulty connection; ampпитання lifier | Inspect all wiring for intermittent contact. Ensure connections are secure. |
8. Технічні характеристики
Key technical specifications for the Alpine SXE-1751S Component Speaker System:
| Особливість | Специфікація |
|---|---|
| Назва моделі | SXE-1751S |
| Тип динаміка | 2-Way Component System (Woofer, Tweeter) |
| Діаметр НЧ-динаміка | 6.5 дюймів (16.5 см) |
| Потужність RMS | 45 Вт |
| Пікова потужність | 280 Вт |
| Номінальний імпеданс | 4 Ом |
| АЧХ | 60 Гц - 20 кГц |
| Матеріал НЧ-динаміка | Феритовий НЧ-динамік |
| Матеріал твітера | Неодимовий твітер |
| Голосова котушка | Kapton Voice Coil |
| Розміри продукту | 3"D x 3"W x 8.75"H (Approximate, for packaging) |
| Вага товару | 2.99 фунта |
| UPC | 793276242976 |
9. Інформація про гарантію
Alpine products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
Для отримання детальної інформації про гарантію, будь ласка, зверніться до гарантійного талона, що додається до вашого продукту, або відвідайте офіційний веб-сайт Alpine. webсайт.
10. Підтримка
For further assistance, technical support, or inquiries regarding your Alpine SXE-1751S Component Speaker System, please visit the official Alpine webсайту або зв’яжіться зі своїм відділом обслуговування клієнтів.
Альпійський офіційний Webсайт: www.alpine-usa.com
You can also visit the Alpine Store on Amazon for product information and support resources: Alpine Store