Basic Fun 520 15237

K'NEX Architecture: Інструкція з експлуатації колеса огляду «Лондонське око»

Model: 520 15237 | Brand: Basic Fun

1. Продукт закінчивсяview

The K'NEX Architecture London Eye Ferris Wheel building set allows you to construct an authentic and motorized replica of the iconic London Eye. This set is designed for builders aged 9 and above, offering a challenging yet rewarding construction experience. It features 1,861 K'NEX rods and connectors that snap together to form a detailed model standing approximately 60 cm (24 inches) tall. The included motor provides realistic movement, bringing your creation to life.

K'NEX building sets promote developmental growth, including fine motor skills, dexterity, and spatial awareness, contributing to a better understanding of STEM (Science, Technology, Engineering, and Mathematics) subjects.

Assembled K'NEX London Eye Ferris Wheel

Image 1.1: Fully assembled K'NEX London Eye Ferris Wheel model, showcasing its intricate design and scale.

2. Інформація про безпеку

  • УВАГА: Цей виріб містить дрібні деталі та не підходить для дітей віком до 3 років через небезпеку задухи.
  • Під час складання рекомендується нагляд дорослих, особливо для молодших будівельників.
  • Тримайте пакувальні матеріали подалі від дітей, щоб запобігти задусі.

3. Вміст упаковки

Upon opening the box, verify that all components are present. The K'NEX Architecture London Eye set includes:

  • 1,861 K'NEX rods and connectors
  • 1 Motorized unit
  • Detailed step-by-step building instructions
  • Historical information about the London Eye landmark
K'NEX London Eye product box

Image 3.1: The K'NEX London Eye product packaging, showing the assembled model and key features.

4. Налаштування та складання

Assembly of the K'NEX London Eye requires careful attention to detail. Follow the included step-by-step instructions precisely.

  1. Приготування: Unpack all components and organize them by type and color. This will significantly aid in the building process.
  2. Building the Structure: Begin by following the instructions to connect the rods and connectors. K'NEX pieces are designed to "click" together securely. Ensure each connection is firm to maintain the structural integrity of the model.
  3. Установка двигуна: Locate the motorized unit. Install 2 AA batteries (not included) into the motor compartment, ensuring correct polarity. Refer to the instructions for the exact placement of the motor within the London Eye structure.
  4. Остаточні перевірки: Після завершення складання, повторноview the model against the instruction diagrams to ensure all parts are correctly placed and secured.
Під кутом view of the assembled K'NEX London Eye

Зображення 4.1: Кутовий view of the completed K'NEX London Eye model, highlighting its structural complexity.

5. Інструкція з експлуатації

The K'NEX London Eye features a motorized function to simulate the real landmark's rotation.

  • Ensure batteries are correctly installed in the motor.
  • Locate the ON/OFF switch on the motorized unit.
  • Flip the switch to the "ON" position to activate the motor and begin the rotation of the London Eye.
  • To stop the rotation, flip the switch to the "OFF" position.

6. Технічне обслуговування

  • Прибирання: Щоб очистити модель, обережно протріть її сухою м’якою тканиною. Уникайте використання агресивних хімікатів або абразивних матеріалів.
  • Зберігання: When not in use, store the model in a clean, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
  • Догляд за акумулятором: Remove batteries from the motorized unit if the model will not be used for an extended period to prevent battery leakage.

7. Вирішення проблем

  • Мотор не працює:
    • Перевірте, чи правильно вставлені батарейки з дотриманням полярності.
    • Замініть старі батарейки на нові.
    • Ensure the motor's connections to the model are secure and free from obstructions.
  • Model Not Rotating Smoothly:
    • Verify that all K'NEX connections are fully engaged and secure. Loose connections can cause misalignment.
    • Check for any misaligned or bent pieces that might be causing friction.
    • Переконайтеся, що модель розміщена на рівній, стійкій поверхні.
  • Відсутні частини:
    • Carefully re-check the packaging and surrounding area for any small pieces that might have been overlooked.
    • If pieces are genuinely missing, contact Basic Fun customer support for assistance.

8. Технічні характеристики

ОсобливістьДеталь
Номер моделі520 15237
БрендОсновні розваги
Кількість штук1,861
Розміри у зібраному вигляді (приблизно)48.26 x 60.96 x 66.04 см (19 x 24 x 26 дюйма)
Вага (прибл.)1.5 кг (3.3 фунта)
Тип матеріалупластик
Моторизованийтак
Потрібні батареїТак (2 батарейки типу АА, не входять в комплект)
Рекомендований вік9+ років
Освітні ціліDexterity, Motor Skills, Spatial Reasoning, STEM

9. Гарантія та підтримка

For information regarding product warranty, replacement parts, or technical support, please contact Basic Fun customer service.

  • Visit the official Basic Fun webсайт для отримання контактної інформації та поширених запитань.
  • Зберігайте чек про покупку для гарантійного обслуговування.

Примітка: Specific warranty terms may vary by region. Please refer to the documentation included with your product or the manufacturer's webсайт для найточнішої та актуальної інформації.

Пов'язані документи - 520 15237

попередньоview Набір моторизованих моделей K'NEX: інструкції та ідеї для складання
Вичерпні інструкції та ідеї для складання моторизованих моделей з набору K'NEX. Дізнайтеся, як зібрати різні моделі, такі як Apple, Scorpion, Tractor тощо, а також поради щодо використання батарейок та деталей.
попередньоview Protec P3000(XL) ヘリウムリークディテクター 取扱説明書
INFICON Protect P3000(XL)ヘリウムリークディテクターの機能、設置、操作、設定、保守に関する詳細な取扱説明書。製品の仕様、安全上の注意、トラブルシューティング情報を提供します。
попередньоview K'NEX Custom Cruisers Building Set Instructions (Model 17029)
Official building instructions and parts list for the K'NEX Custom Cruisers building set (Model 17029). Learn how to construct various vehicles and models with this K'NEX set.
попередньоview Protec® P3000(XL) 氦 吸枪式检漏仪 操作说明书
INFICON Protec® P3000(XL) 氦吸枪式检漏仪的操作说明书,提供设备功能、安装、启动和操作的详细指南。.
попередньоview Protec® P3000(XL) Rilevatore di fuughe ad elio - Manuale Tecnico
Технічне керівництвоtagтільки для підйомника до INFICON Protec P3000 і Protec P3000XL. Copre installazione, funzionamento, manutenzione e risoluzione dei problemi.
попередньоview Danfoss VLT® FlexMotion™: гнучка система сервоприводів для промислових машин
Отримайте систему Danfoss VLT® FlexMotion™, масштабоване рішення для сервоприводу та аперту, що пропонує велику гнучкість для централізації та децентралізації додатків у промислових машинах. Модулі Esplora бувають MSD 520, ISD 520 і DSD 520.