Tackform Enduro Series 3.5-inch Aluminum Dual Articulating Arm

1. Продукт закінчивсяview

The Tackform Enduro Series 3.5-inch Aluminum Dual Articulating Arm is designed for versatile device mounting. It features dual articulating 20mm ball sockets and thumbscrews for quick and precise adjustments. This arm is a core component of the Tackform Enduro Series, an ecosystem of mounting solutions.

• Сумісність: Fully compatible with all Tackform Enduro Series 20mm components, including suction cups, table clamps, headrest clamps, and various device holders (phones, tablets, action cameras).
• Будівництво: Constructed entirely from aluminum for durability and strength. Thumbscrews are made of ABS Plastic.
• Довжина: Total arm length is 3.5 inches.
• Артикуляція: Dual ball and socket joints provide multiple points of articulation for optimal device positioning.
• Універсальність: Can be used to replace existing arms for different lengths or to add articulation points with ball-to-ball adapters.

2. Компоненти

The Tackform Dual Articulating Arm consists of a central aluminum arm with two 20mm ball sockets at each end. Each socket is secured by a thumbscrew for independent adjustment.

Figure 1: The Tackform 3.5-inch Aluminum Dual Articulating Arm.

Figure 2: The 3.5-inch length of the articulating arm.

Figure 3: The arm is compatible with 20mm Enduro Series components.

3. Налаштування та встановлення

To set up your Tackform Dual Articulating Arm, follow these steps:

1. Loosen Thumbscrews: Gently loosen the thumbscrews on both ends of the arm to allow the ball sockets to open.
2. Insert Ball Mounts: Insert your desired 20mm ball mounts (e.g., a base mount and a device holder) into each socket. Ensure the balls are fully seated within the sockets.
3. Tighten Thumbscrews: Hand-tighten the thumbscrews to secure the ball mounts. Do not overtighten.
4. Налаштувати позицію: Loosen one thumbscrew slightly to adjust the angle of that specific ball joint. Once the desired angle is achieved, re-tighten the thumbscrew. Repeat for the other joint if necessary.

For a visual guide on attaching and securing the arm, please refer to the official product overview відео нижче.

Additional demonstrations of 20mm ball arm functionality can be seen in the following videos:

4. Операція

The dual articulating design allows for flexible positioning of your mounted device. Each thumbscrew independently controls the tightness of its respective ball socket, enabling precise adjustments without affecting the other joint.

Figure 4: The arm allows for 180-degree rotation at each joint.

Figure 5: The ball joints enable full 360-degree rotation for optimal viewкути.

To adjust the arm:

1. Послабити: Turn the desired thumbscrew counter-clockwise to loosen the grip on the ball.
2. Посада: Adjust the angle and orientation of the attached device or base.
3. Безпечний: Turn the thumbscrew clockwise to tighten and secure the ball in its new position. Ensure it is firm to prevent movement during use.

Figure 6: The arm can be used in various configurations, such as mounting an action camera or a tablet.

5. Технічне обслуговування

To ensure the longevity and optimal performance of your Tackform Dual Articulating Arm, consider the following maintenance tips:

• Прибирання: Wipe the aluminum arm and ABS plastic thumbscrews with a soft, damp тканиною, щоб видалити пил і бруд. Уникайте абразивних засобів для чищення або розчинників, які можуть пошкодити покриття.
• Огляд: Periodically inspect the arm and thumbscrews for any signs of wear, damage, or loosening.
• Герметичність: Ensure all thumbscrews are adequately tightened before each use to prevent accidental movement or detachment of your device.

6. Вирішення проблем

If you encounter any issues with your Tackform Dual Articulating Arm, please consider the following:

• Рука не тримає положення: Ensure both thumbscrews are fully tightened. If using a rubberized ball, confirm it is properly seated within the socket.
• Складність налаштування: Loosen the thumbscrews sufficiently to allow free movement of the ball joints. If the arm is new, it may require a few adjustments to loosen up.
• Проблеми сумісності: Verify that all connected components are 20mm ball compatible. This arm is specifically designed for 20mm ball systems.

7. Технічні характеристики

8. Гарантія та підтримка

This product is manufactured by Tackform. For any warranty claims, technical support, or product inquiries, please contact Tackform directly through their official customer service channels. Refer to the product packaging or the Tackform webсайт для отримання найактуальнішої контактної інформації.