APS iArmor 304 Stainless Steel 6.5-inch Nerf Bars / Pocket Steps

1. Вступ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your APS iArmor 304 Stainless Steel 6.5-inch Nerf Bars / Pocket Steps. These running boards are designed to provide a secure step into your vehicle and offer protection to the rocker panels. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Інформація про безпеку

• Завжди використовуйте відповідні засоби індивідуального захисту (ЗІЗ) під час встановлення, включаючи захисні окуляри та рукавички.
• Перед початком встановлення переконайтеся, що автомобіль припаркований на рівній поверхні з увімкненим стоянковим гальмом.
• Never exceed the product's maximum weight capacity of 500 lbs.
• Verify all hardware is securely tightened after installation and periodically check for tightness during regular vehicle maintenance.
• Якщо ви не впевнені щодо будь-якого етапу процесу встановлення, зверніться до кваліфікованого фахівця.

3. Вміст упаковки

Перед початком встановлення перевірте наявність усіх компонентів:

• Set (2) of Side Armor (Nerf Bars / Pocket Steps)
• Mounting Kit (includes all necessary brackets and hardware)

4. Технічні характеристики

5. Сумісність

These APS iArmor Nerf Bars / Pocket Steps are compatible with the following vehicle:

• Jeep Wrangler JL 4-Door models, years 2018-2025 (including 2021-2025 4xe models).

Важлива примітка: Factory side steps or rock rails must be removed prior to installing these APS iArmor Nerf Bars.

зображення: Compatibility diagram illustrating that the product is suitable for 4-door Jeep Wrangler JL models, not 2-door models.

6. Встановлення (налаштування)

The APS iArmor Nerf Bars are designed for straightforward installation using the included brackets and hardware. Professional installation is recommended if you are not familiar with vehicle modifications.

Загальні кроки встановлення:

1. Приготування: Park the vehicle on a flat, stable surface. Engage the parking brake. If present, remove any existing factory side steps or rock rails.
2. Визначте компоненти: Separate the left and right side steps and corresponding mounting brackets.
3. Прикріпіть кронштейни: Secure the mounting brackets to the vehicle's frame using the provided hardware. Refer to the specific vehicle's mounting points.
4. Mount Nerf Bars: Carefully lift each nerf bar into position and attach it to the installed brackets using the remaining hardware.
5. Відрегулювати та затягнути: Adjust the position of the nerf bars for optimal alignment. Once satisfied, securely tighten all bolts and nuts.
6. Остаточна перевірка: Double-check all connections for tightness and ensure the nerf bars are stable and do not wobble.

зображення: A black Jeep Wrangler JL 4-door with the APS iArmor Nerf Bars installed, showcasing the side profile.

зображення: Колишнійample of the APS iArmor running boards installed on a vehicle, demonstrating the integrated design.

Деталі конструкції:

The iArmor Nerf Bars feature a dual girder system for enhanced protection and a unique square tube design with slotted step pads. The manufacturing process utilizes automatic robot welding for high-quality fabrication and consistent quality control, ensuring durability and a precise fit.

зображення: An industrial robotic arm performing welding, representing the automatic robot welding process used in manufacturing.

7. Операція

These nerf bars serve as both side bars and running boards, providing a stable and wide stepping surface for easier entry and exit from your vehicle. The slotted step pads offer improved grip.

Правила використання:

• Step onto the designated step pads when entering or exiting the vehicle.
• Ensure your footwear has adequate grip, especially in wet or muddy conditions.
• Do not use the nerf bars as a jacking point for the vehicle.
• The maximum weight capacity is 500 lbs. Do not exceed this limit.

зображення: A close-up of a foot stepping onto the running board, illustrating the practical use of the step.

зображення: A visual representation of the dual-tier step design, emphasizing the expanded stepping area for user convenience.

8. Технічне обслуговування

Regular maintenance will help preserve the appearance and functionality of your APS iArmor Nerf Bars.

• Прибирання: Clean the nerf bars regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the matte black powder-coated finish.
• Огляд: Periodically inspect the nerf bars and all mounting hardware for any signs of damage, corrosion, or looseness. Tighten any loose fasteners immediately.
• Стійкість до іржі: The 304 stainless steel construction and powder-coated finish provide rust resistance and UV protection. However, prolonged exposure to harsh elements or damage to the coating can lead to corrosion. Address any chips or scratches in the finish promptly.

зображення: Виріз view of the nerf bar's construction, illustrating the stainless steel core protected by pre-treatment, anti-corrosion primer, and a powder-coated finish.

9. Вирішення проблем

Поширені проблеми та рішення:

• Випуск: Nerf bars appear to sit too low or expose pinch welds.
• рішення: Ensure all brackets are installed correctly and oriented as per the instructions. Some vehicle designs may inherently show more of the pinch weld than others. Verify that the correct model-specific product was purchased.
• Випуск: Loose fit or rattling.
• рішення: Re-check all mounting hardware for proper tightness. Over time, vibrations can cause fasteners to loosen.
• Випуск: Difficulty aligning the steps.
• рішення: Loosen the mounting bolts slightly to allow for minor adjustments. Once aligned, tighten all bolts securely.

10. Гарантія та підтримка

Інформація про гарантію:

APS offers a Обмежена 5-річна гарантія against manufacturing defects for this product. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

Підтримка клієнтів:

For technical assistance, warranty claims, or further inquiries, please contact APS customer support. You can find more information and contact details by visiting the official APS store:

Visit the APS Store on Amazon