Інструкція з експлуатації багатофункціональної настільної пилки Evolution Power Tools Rage 5-S

1. Вступ

This manual provides essential instructions for the safe operation, assembly, maintenance, and troubleshooting of your Evolution Power Tools Rage 5-S Multi-Material Table Saw. Please read this manual thoroughly before initial use to ensure proper function and to prevent injury or damage to the tool.

The Rage 5-S table saw is designed for cutting various materials including steel, aluminum, wood (even with embedded nails), and plastic, utilizing a single 10-inch TCT blade. Its portable design with a folding stand and wheels enhances convenience for transport and storage.

Figure 1.1: Evolution Rage 5-S Multi-Material Table Saw

2. Техніка безпеки

Завжди ставте безпеку на перше місце під час роботи з електроінструментами. Недотримання цих інструкцій може призвести до серйозних травм або пошкодження майна.

• Засоби індивідуального захисту: Always wear safety glasses, hearing protection, and a dust mask. Use appropriate clothing; avoid loose clothing or jewelry that could get caught in moving parts.
• Робоча зона: Ensure your work area is clean, well-lit, and free from obstructions. Do not operate the saw in damp or wet conditions. Keep children and bystanders away.
• Електрична безпека: Ensure the power supply matches the saw's requirements (120V). Do not use the saw with a damaged cord or plug. Avoid using extension cords unless absolutely necessary, and ensure they are rated for outdoor use and heavy-duty applications.
• Безпека леза: Always ensure the blade is sharp and correctly installed. Never attempt to cut material without the blade guard in place. Disconnect power before changing blades or performing maintenance.
• Обробка матеріалів: Securely support all workpieces. Use the push stick for narrow cuts. Never reach over or behind the spinning blade.
• Пропозиція 65 Попередження: Цей продукт може містити хімічні речовини, які, як відомо штату Каліфорнія, викликають рак, вроджені вади розвитку або інші репродуктивні порушення. Мийте руки після використання.

3. Компоненти Overview

The Evolution Rage 5-S table saw includes the following main components:

• Table Saw Unit
• Folding Stand with Wheels
• 10-inch 28T Multi-Material TCT Blade
• Збірка захисту леза
• Rip Fence with Measuring Rail Guide
• Колірний датчик
• Push Stick
• Шланг для видалення пилу
• Table Extensions (Left and Right)

Figure 3.1: The Rage 5-S table saw is capable of cutting wood, wood with nails, composite decking, ferrous metals, non-ferrous metals, laminates, and plastics.

4. Налаштування та складання

Assembly is required before first use. Refer to the visual diagrams provided in the original manual for detailed steps. General assembly involves:

1. Стенд в зборі: Unfold the stand and secure its locking mechanisms. The integrated wheels facilitate movement.
2. Attaching the Saw Unit: Mount the table saw unit securely onto the assembled stand.
3. Встановлення леза: Ensure the saw is unplugged. Install the 10-inch TCT blade, ensuring it is oriented correctly for cutting.
4. Blade Guard and Riving Knife: Install the blade guard and riving knife assembly. The blade guard is crucial for safety and dust collection.
5. Rip Fence and Miter Gauge: Attach the rip fence to the table and ensure it slides smoothly. The miter gauge can be inserted into the table slots.
6. Dust Extraction Hose: Connect the supplied dust extraction hose to the saw's dust port.
7. Table Extensions: Extend the left and right table extensions as needed for larger workpieces.

Figure 4.1: The collapsible frame and wheels allow for easy transport and upright storage of the table saw.

5. Інструкція з експлуатації

5.1 Увімкнення/вимкнення

To power on the saw, press the green 'ON' button. To power off, press the red 'OFF' button. Always ensure the saw is off and unplugged before making adjustments or performing maintenance.

5.2 Регулювання висоти леза

The blade height can be adjusted to suit the thickness of your material or for trench cuts. Use the blade height adjustment wheel located on the front of the saw to raise or lower the blade. Ensure the blade is set to cut approximately 1/8 inch above the workpiece for through cuts.

Figure 5.1: Blade height adjustment mechanism. The saw achieves a 3-1/4 inch depth of cut at 90 degrees.

Figure 5.2: Maximum depth of cut through wood is 3-1/4 inches.

5.3 Bevel and Miter Angle Adjustment

The saw allows for precise angle adjustments for both bevel and miter cuts.

• Регулювання скосу: The blade can be tilted up to 45 degrees for bevel cuts. Use the bevel adjustment lever and scale to set the desired angle. The maximum depth of cut at 45 degrees bevel is 2-1/4 inches.
• Miter Adjustment: The miter gauge allows for angle cuts up to 60 degrees. Adjust the miter gauge to the required angle and secure it before making the cut.

Figure 5.3: Clear and precise angle settings for miter and bevel cutting.

Figure 5.4: Bevel/tilt functionality allows for angled cuts.

Figure 5.5: Accurate cutting from 90 degrees to 45 degrees left bevel.

5.4 Rip Cutting

For rip cuts (cutting along the grain), use the adjustable, full-length parallel fence. Position the fence according to the desired width using the measuring rail guide. Ensure the workpiece is firmly against the fence and use the push stick for the final portion of the cut, especially for narrow pieces. The saw offers a 25-1/2 inch rip capacity to the right of the blade.

Figure 5.6: The saw provides a 25-1/2 inch rip capacity to the right of the blade.

Figure 5.7: The sliding table and anti-vibration device assist in smooth and stable cuts.

5.5 Cross Cutting

For cross cuts (cutting across the grain), use the miter gauge. Set the miter gauge to the desired angle and slide it in the table slot. Hold the workpiece firmly against the miter gauge and feed it slowly through the blade.

5.6 Видалення пилу

The saw features an effective dust extraction system to maintain a cleaner work environment. Connect the supplied 70-14/16 inch hose to the dust port on the saw and to a suitable dust collector or shop vacuum. This helps reduce airborne dust and keeps the cutting line visible.

Figure 5.8: Effective dust extraction with the supplied hose.

5.7 Table Extensions

The built-in left and right table extensions can be deployed to support larger workpieces, providing a total surface area of 47-1/4 x 25-3/16 inches. Ensure extensions are locked in place before use.

Figure 5.9: Built-in table extensions capable of cutting large sheet material.

6. Технічне обслуговування

Регулярне технічне обслуговування забезпечує довговічність та безпечну роботу вашої циркулярної пилки.

• Прибирання: After each use, disconnect the power and clean the saw table, blade guard, and dust ports. Remove sawdust and debris from the motor ventilation openings.
• Перевірка леза: Regularly inspect the blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately.
• Рухомі частини: Check all moving parts for proper function and lubrication. Ensure all fasteners are tight.
• Перевірка шнура: Inspect the power cord for any signs of damage. Do not use the saw if the cord is damaged.

7. Вирішення проблем

If you encounter issues with your Rage 5-S table saw, refer to the following common problems and solutions:

• Saw Does Not Start: Check if the power cord is securely plugged in. Verify the power outlet is functional. Ensure the 'ON' button is fully depressed.
• Poor Cut Quality (Tear-out, Burning): The blade may be dull or dirty. Replace or clean the blade. Ensure the blade is correctly installed and aligned. Reduce feed rate.
• Надмірна вібрація: Check if the blade is properly installed and tightened. Ensure the saw is securely mounted to the stand and the stand is stable on a level surface.
• Dust Collection Ineffective: Check for clogs in the dust extraction hose or dust port. Ensure the hose is properly connected to a functioning dust collector.

For issues not resolved by these steps, contact Evolution Power Tools customer support.

8. Технічні характеристики

Figure 8.1: Key cutting capacities and dimensions of the Rage 5-S table saw.

9. Гарантія та підтримка

The Evolution Power Tools Rage 5-S Table Saw comes with a 3 рік обмеженої гарантіїЦя гарантія поширюється на дефекти матеріалів та виготовлення за умов нормального використання. Будь ласка, збережіть чек про покупку для пред'явлення претензій за гарантією.

For technical assistance, warranty service, or to order replacement parts, please contact Evolution Power Tools customer support. Refer to the official Evolution Power Tools webсайт для отримання актуальної контактної інформації.