Продукт закінченийview
The Fire-Lite ES-200X is a sophisticated 198-point addressable fire alarm control panel designed for comprehensive fire and CO detection. It features built-in dual path communications, user-programmable buttons, and supports combined fire and carbon monoxide addressable detection, making it a versatile solution for various safety applications.
Малюнок 1: Спереду view of the ES-200X Intelligent Addressable Fire Alarm Control Panel, showing the red enclosure and the central control interface with an LCD display and keypad.
Налаштування та встановлення
Proper installation of the ES-200X control panel is crucial for its reliable operation. This section outlines the general steps for setting up the unit.
1. Розпакування та перевірка
- Carefully remove the ES-200X panel from its packaging.
- Inspect the unit for any signs of shipping damage. Report any damage to the supplier immediately.
- Перевірте наявність усіх компонентів, перелічених у пакувальній накладній.
2. Монтаж панелі
- Select a suitable location for mounting, ensuring it is clean, dry, and accessible for maintenance.
- Mount the panel securely to a wall or other stable surface using appropriate fasteners. Ensure the mounting surface can support the panel's weight (approximately 26.9 pounds).
3. Підключення проводів
- Connect the primary power source to the panel. The panel is designed for battery-powered operation, but requires AC power for charging and primary operation.
- Connect all addressable devices (detectors, modules, manual pull stations) to the SLC (Signaling Line Circuit) loop. The ES-200X supports up to 198 addressable devices.
- Wire the four built-in, independently programmable NACs (Notification Appliance Circuits) for connecting audible and visual notification appliances (e.g., horns, strobes). The panel supports selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices.
- Ensure all wiring complies with local electrical codes and NFPA standards.
4. Початкова конфігурація
- Power on the panel. The integral 80-character LCD display with backlighting will illuminate.
- Utilize the auto-programming (learn mode) feature to automatically detect and assign addresses to connected devices. This feature helps reduce installation time and reports if two devices are set to the same address.
- Configure programmable buttons and system settings as required for your specific application.
- Set the real-time clock/calendar, which includes automatic daylight savings control.
Інструкція з експлуатації
This section provides guidance on the daily operation of the ES-200X control panel.
1. Understanding the Display and Indicators
The ES-200X features an 80-character LCD display that provides real-time system status, event messages, and programming prompts. Various LED indicators on the panel illuminate to show system conditions such as Alarm, Supervisory, Trouble, and AC Power.
2. Acknowledging Events
- When an event (e.g., alarm, trouble) occurs, the panel's audible signal will activate, and relevant indicators will illuminate.
- Натисніть ПІДТВЕРДИТИ button (typically labeled) to silence the panel's audible signal and acknowledge the event. The event message will remain on the LCD display until resolved.
3. Silencing Alarms
- After an alarm is acknowledged, the notification appliances (horns, strobes) will continue to activate.
- Натисніть ТИША button to deactivate the notification appliances. The panel will remain in an alarm state until reset.
4. Скидання системи
- Once the cause of an alarm or trouble condition has been resolved, the system can be reset.
- Натисніть СКИДАННЯ button. The panel will attempt to clear all active alarms and trouble conditions and return to a normal operating state.
- If the condition persists, the panel will re-indicate the alarm or trouble.
5. Використання програмованих кнопок
The ES-200X features programmable buttons that can be configured for specific functions, such as activating the ECC-50/100 Emergency Command Center or other custom actions. Refer to the installation manual for detailed programming instructions for these buttons.
Технічне обслуговування
Regular maintenance ensures the continued reliability and optimal performance of your ES-200X fire alarm control panel.
1. Планові перевірки
- щоденно: Observe the panel's LCD display for a "SYSTEM NORMAL" message. Note any active trouble or alarm indicators.
- Щомісяця: Conduct a visual inspection of the panel and connected devices for any physical damage, loose wiring, or obstructions.
- Щорічно: Perform a comprehensive system test, including testing all detectors, manual pull stations, and notification appliances, in accordance with NFPA 72 standards.
2. Технічне обслуговування акумулятора
- The panel relies on backup batteries during power outages. Inspect batteries periodically for corrosion or swelling.
- Test battery functionality annually by simulating a power failure and ensuring the system operates on battery power for the required duration. Replace batteries as recommended by the manufacturer or when they fail to hold a charge.
3. прибирання
- Keep the panel's exterior clean using a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Переконайтеся, що вентиляційні отвори вільні від пилу та сміття.
4. Синхронізація часу
- The ES-200X features a real-time clock/calendar with automatic daylight savings control. Verify that the date and time displayed on the LCD are accurate during routine checks.
Усунення несправностей
This section provides solutions to common issues you may encounter with the ES-200X control panel. For complex problems, contact qualified service personnel.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Panel does not power up. | No AC power, faulty power supply, disconnected battery, or internal fault. |
|
| System displays "Trouble" message. | Device fault, wiring issue, ground fault, or low battery. |
|
| Alarm activates unexpectedly. | Actual fire condition, faulty detector, or environmental factors (e.g., dust, steam). |
|
| Auto-programming reports duplicate addresses. | Two or more addressable devices are configured with the same address. |
|
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | Fire-Lite |
| Номер моделі | ES-200X |
| Номер деталі | ES-200X |
| UPC | 783008112608 |
| Addressable Device Capacity | 198 points (SLC Loop) |
| NACs (Notification Appliance Circuits) | 4 (Style Z/Class A or Style Y/Class B) |
| Комунікатор | Built-in dual path (IPOTS-COM) |
| Дисплей | Integral 80-Character LCD with Backlighting |
| Джерело живлення | Battery Powered (requires AC for charging/primary) |
| Колір | Червоний |
| Вага товару | 26.9 фунта |
| Розміри упаковки | 23 x 20 x 7 дюймів |
| Батареї в комплекті? | немає |
| Дата першої доступності | 4 вересня 2019 р |
Гарантія та підтримка
For detailed warranty information regarding your ES-200X Intelligent Addressable Fire Alarm Control Panel, please refer to the documentation provided with your purchase or visit the official Fire-Lite website. Warranty terms and conditions typically cover manufacturing defects and vary by region.
For technical support, service, or inquiries about replacement parts, please contact Fire-Lite customer service or an authorized Fire-Lite distributor. Contact information can usually be found on the manufacturer's official webсайту або в упаковці продукту.
It is recommended that all installation, maintenance, and troubleshooting beyond basic operations be performed by qualified and certified fire alarm technicians to ensure compliance with safety standards and proper system functionality.
