1. Продукт закінчивсяview
The SPI SM-12604 is a specialized clutch alignment tool designed for powersports vehicles. This tool is essential for accurately aligning the clutch disc during transmission installation, ensuring proper engagement and preventing damage to the clutch or transmission components.
Зображення 1.1: The SPI SM-12604 Clutch Alignment Tool. This image displays the tool's overall shape and construction, which is typically a durable metal with specific contours designed to fit into the clutch disc and pilot bearing for precise alignment.
Ключові характеристики:
- Тип продукту: Powersports Vehicle Part
- Призначення: Facilitates accurate clutch disc alignment
- Кількість в упаковці: 1 інструмент
- вага: Приблизно 2.9 фунта
- Походження: Вироблено в Сполучених Штатах
2. Налаштування та підготовка
Before using the SPI SM-12604 clutch alignment tool, ensure the work area is clean, well-lit, and safe. Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
2.1. Необхідні компоненти
- Clutch pressure plate assembly
- Диск зчеплення
- Pilot bearing (if applicable and installed in crankshaft)
- Flywheel (installed on crankshaft)
- Спосіб передавання
2.2. Етапи перед інсталяцією
- Ensure the flywheel surface is clean and free of oil or grease.
- Verify the pilot bearing (if used) is correctly installed in the crankshaft. The alignment tool's tip will engage with this bearing.
- Position the clutch disc against the flywheel, ensuring the correct side faces the pressure plate. Typically, the side with the longer hub protrusion faces away from the flywheel.
- Place the pressure plate assembly over the clutch disc, aligning the mounting holes with those on the flywheel.
3. Інструкція з експлуатації
The SPI SM-12604 clutch alignment tool is designed for straightforward use to ensure precise clutch disc centering.
3.1. Clutch Disc Alignment Procedure
- Carefully insert the SPI SM-12604 alignment tool through the center of the clutch disc and into the pilot bearing (or pilot hole in the crankshaft).
- Gently wiggle the tool to ensure the clutch disc is perfectly centered on the flywheel. The tool should slide in smoothly and hold the disc in place without excessive play.
- Once the clutch disc is centered by the tool, begin installing the pressure plate bolts. Tighten these bolts gradually and evenly in a star pattern, following the torque specifications provided by the vehicle manufacturer. This prevents warping of the pressure plate.
- After all pressure plate bolts are tightened to specification, carefully remove the SPI SM-12604 alignment tool. The clutch disc should now be perfectly aligned and held firmly by the pressure plate.
- Proceed with the transmission installation, ensuring the input shaft slides smoothly into the aligned clutch disc splines and pilot bearing.
Примітка: If the transmission input shaft does not slide in easily, do not force it. Re-check the clutch disc alignment and ensure no obstructions are present.
4. Технічне обслуговування
Proper maintenance will extend the life and ensure the continued accuracy of your SPI SM-12604 clutch alignment tool.
- Прибирання: After each use, wipe the tool clean with a dry cloth to remove any grease, oil, or debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- Зберігання: Store the tool in a dry environment to prevent rust. A tool box or drawer is ideal.
- Огляд: Periodically inspect the tool for any signs of damage, bending, or wear that could affect its accuracy. If the tool appears damaged or bent, it should be replaced to ensure proper clutch alignment.
5. Вирішення проблем
This section addresses common issues that may arise during the use of the clutch alignment tool.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Tool does not fit into clutch disc/pilot bearing. | Incorrect tool size for the application; pilot bearing damaged or incorrect; clutch disc hub damaged. | Verify the tool is the correct model for your vehicle's clutch system. Inspect pilot bearing and clutch disc for damage or incorrect specifications. |
| Clutch disc does not center properly. | Tool not fully inserted; clutch disc or pressure plate warped; pilot bearing issue. | Ensure the tool is fully seated. Inspect clutch disc and pressure plate for warpage. Check pilot bearing condition. |
| Transmission input shaft will not slide into clutch. | Clutch disc not aligned; pilot bearing issue; transmission input shaft damaged. | Re-insert the alignment tool to re-center the clutch disc. Inspect pilot bearing and transmission input shaft for damage. Do not force the transmission. |
6. Технічні характеристики продукту
Detailed specifications for the SPI SM-12604 Clutch Alignment Tool:
| Виробник | SPI |
| Бренд | SPI |
| Номер моделі | СМ-12604 |
| Номер деталі виробника | 11-21252 |
| Вага товару | 2.91 фунта (приблизно 1.32 кг) |
| Розміри продукту | 5 x 1 x 1 дюймів (приблизно 12.7 x 2.54 x 2.54 см) |
| Зовнішня обробка | Пофарбований |
| Країна походження | США |
| Перша доступна дата | 25 липня 2019 р |
7. Гарантія та підтримка
Specific warranty details for the SPI SM-12604 Clutch Alignment Tool are typically provided with the product packaging or can be obtained directly from the manufacturer.
For technical support, warranty claims, or further inquiries, please contact SPI directly through their official channels. Refer to the product packaging or the SPI official webсайт для отримання найактуальнішої контактної інформації.
Важливо: Завжди зберігайте чек про покупку для гарантійних цілей.
