POOLEX PC-SLP150

Інструкція з експлуатації теплового насоса для басейну POOLEX PC-SLP150 Silverline 150

Бренд: ПУЛЕКС

модель: PC-SLP150 Silverline 150

1. Вступ і даліview

This manual provides comprehensive instructions for the installation, operation, and maintenance of the POOLEX PC-SLP150 Silverline 150 Pool Heat Pump. Designed for pools up to 75 m3, this heat pump features a high-performance Mitsubishi compressor and a titanium exchanger for efficient and silent pool heating.

Ключові особливості:

  • High-performance Mitsubishi compressor.
  • Double-spiral titanium exchanger and twisted tech titanium coil for rapid heating.
  • Міцний металевий casing with anti-UV and anti-corrosion properties.
  • Automatic thermostatic control.
  • Compatibility with salt treatment systems.
  • User-friendly LCD control panel with Touch & Go technology (optional Wi-Fi module available).
POOLEX PC-SLP150 Silverline 150 Pool Heat Pump

Image 1: POOLEX PC-SLP150 Silverline 150 Pool Heat Pump. This image shows the compact, grey-colored heat pump unit with a circular fan grille on the side and the "POOLEX Silverline" logo prominently displayed.

2. Інформація про безпеку

Please read all safety instructions carefully before installing, operating, or performing maintenance on the heat pump. Failure to follow these instructions may result in property damage, serious injury, or death.

  • Електрична безпека: Ensure the unit is properly grounded. All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Disconnect power before any service or maintenance.
  • Безпека на воді: Do not operate the heat pump if there is a risk of freezing water inside the unit. Ensure proper water flow through the unit.
  • Установка: Install the unit on a stable, level surface. Maintain adequate clearance around the unit for proper airflow and ventilation. Keep children and pets away from the unit during operation.
  • Технічне обслуговування: Only use manufacturer-approved replacement parts. Do not attempt to modify the unit.
  • Хімічні речовини: Avoid direct contact of pool chemicals with the heat pump casing.

3. Вміст упаковки

Before proceeding with installation, please verify that all the following components are included in your package:

  • POOLEX PC-SLP150 Silverline 150 Heat Pump Unit
  • Anti-vibration support kit
  • PVC connectors Ø 50mm 1½''
  • Шланг для зливу конденсату
  • Комплект для обслуговування
  • Wired control extension (10m)
  • Multi-language user manual (this document)

4. Налаштування та встановлення

Proper installation is crucial for the efficient and safe operation of your heat pump. It is highly recommended that installation be performed by a qualified professional.

4.1. Розміщення

  • Choose a location with good airflow, away from walls or other obstructions.
  • Ensure the unit is placed on a solid, level surface capable of supporting its weight (54 kg).
  • Install the anti-vibration supports to minimize operational noise and vibration.
  • Position the unit to allow for easy access for maintenance.

4.2. Сантехнічні з'єднання

  • Connect the heat pump to your pool's filtration system using the provided PVC connectors (Ø 50mm 1½'').
  • Переконайтеся, що всі з'єднання герметичні, щоб запобігти протіканню.
  • Install the condensate drain hose to direct condensed water away from the unit's base.

4.3. Електричні з'єднання

  • All electrical wiring must comply with local regulations and be carried out by a certified electrician.
  • Ensure the power supply matches the specifications of the heat pump.
  • Connect the wired control extension (10m) if remote control panel placement is desired.

4.4. Початковий запуск

  • Before powering on, ensure the pool pump is running and water is flowing through the heat pump.
  • Turn on the electrical supply to the heat pump.
  • Follow the operating instructions to set your desired pool temperature.

5. Інструкція з експлуатації

The POOLEX PC-SLP150 Silverline 150 is designed for user-friendly operation via its LCD control panel.

5.1. Увімкнення/вимкнення живлення

  • To power on, ensure the main power supply is connected and press the power button on the LCD control panel.
  • Щоб вимкнути, знову натисніть кнопку живлення.

5.2. Установка температури

  • Use the "Touch & Go" interface on the LCD panel to navigate menus.
  • Select the temperature setting option and adjust to your desired pool water temperature.
  • The unit will automatically begin heating until the set temperature is reached.

5.3. Режими роботи

The heat pump primarily operates in heating mode. It will automatically regulate its operation to maintain the set temperature efficiently.

5.4. Wi-Fi Module (Optional)

An optional Wi-Fi module can be integrated for remote control and monitoring. Refer to the separate instructions provided with the Wi-Fi module for setup and operation.

6. Технічне обслуговування

Regular maintenance ensures the longevity and optimal performance of your POOLEX heat pump.

6.1. Регулярне прибирання

  • Keep the exterior of the unit clean, wiping it with a soft, damp тканина.
  • Ensure the air intake and outlet grilles are free from leaves, debris, and other obstructions. Blocked airflow can reduce efficiency.

6.2. Злив конденсату

  • Periodically check the condensate drain hose to ensure it is not blocked and water can flow freely.

6.3. Підготовка до зими

Before the winter season or when temperatures are expected to drop below freezing, perform the following steps:

  • Turn off the heat pump and disconnect its electrical supply.
  • Drain all water from the heat pump and associated plumbing to prevent freezing damage.
  • Cover the unit with a protective, breathable cover designed for outdoor appliances.

6.4. Maintenance Kit

Utilize the included maintenance kit for any specific cleaning or care instructions provided by POOLEX.

7. Вирішення проблем

This section addresses common issues you might encounter. For problems not listed here or if solutions do not resolve the issue, contact qualified service personnel.

проблемаМожлива причинаРішення
Heat pump does not turn on.No power supply; circuit breaker tripped; unit switch off.Check power connections; reset circuit breaker; ensure unit is switched on at the control panel.
Pool water is not heating.Incorrect temperature setting; insufficient water flow; air blockage; low ambient temperature.Verify temperature setting; ensure pool pump is running and filters are clean; check for obstructions around the unit; heat pump efficiency decreases in very cold weather.
Незвичайний шум під час роботи.Loose components; fan obstruction; unit not level; anti-vibration supports not installed correctly.Inspect for loose parts; clear any fan obstructions; ensure unit is on a level surface; verify anti-vibration supports are properly installed. If noise persists, contact service.
Error code on LCD display.Internal fault; sensor issue.Запишіть код помилки та ознайомтеся з повним технічним посібником або зверніться до служби підтримки клієнтів.

8. Технічні характеристики

Номер моделіPC-SLP150
БрендПУЛЕКС
Розміри (Д x Ш x В)92.7 х 34 х 63.6 см
вага54 кг
Теплова потужність15 кВт
Рекомендований об'єм басейнуДо 75 м3
Тип компресораMitsubishi High-Performance
ТеплообмінникDouble-spiral titanium, Twisted Tech titanium coil
COP (26/26 conditions)> 6
Панель керуванняLCD with Touch & Go technology
Casing МатеріалMetallic, anti-UV, anti-corrosion

9. Гарантія та підтримка

POOLEX is committed to customer satisfaction. For detailed warranty information, technical assistance, or to inquire about replacement parts, please refer to the official POOLEX webсайт або зверніться до вашого авторизованого продавця.

Ви часто можете знайти додаткові ресурси підтримки, відповіді на поширені запитання та контактну інформацію на веб-сайті виробника. webсайт.

Пов'язані документи - PC-SLP150

попередньоview Poolex Silverline Top Heat Pump Installation and User Manual
Discover the Poolex Silverline Top heat pumps, offering up to 80% energy savings for swimming pools with R32 refrigerant. This manual provides detailed installation, operation, and maintenance guidance.
попередньоview Poolex Silverline FI Heat Pump Installation and User Manual
Comprehensive guide for the Poolex Silverline FI heat pump, covering installation, operation, maintenance, and troubleshooting. Learn how to set up and use your heat pump for optimal performance.
попередньоview Poolex Silverline Top: Installation and User Manual
Comprehensive guide for the installation, operation, and maintenance of the Poolex Silverline Top heat pump. Learn about its features, technical specifications, and safety precautions for optimal performance.
попередньоview Інструкція з встановлення та використання Poolex Silverline FI
Вичерпний посібник з монтажу та використання теплових насосів Poolex серії Silverline FI (моделі 70, 90, 120, 150, 200), що охоплює безпеку, монтаж, експлуатацію, технічне обслуговування та усунення несправностей.
попередньоview Poolex Heat Pump: Safety, Installation, and User Manual
Comprehensive safety data sheet, installation guide, and user manual for Poolex swimming pool heat pumps, covering safe operation, maintenance, and troubleshooting.
попередньоview Poolex Silverline Top Heat Pump: Installation and User Manual
Comprehensive installation and user manual for the Poolex Silverline Top series of heat pumps. Includes safety instructions, technical specifications, installation guides, operation, maintenance, and troubleshooting.