вступ
The SodaStream Fountain Jet Sparkling Water Maker allows you to transform ordinary tap water into fresh, sparkling water in seconds. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device.
Image: The SodaStream Fountain Jet Sparkling Water Maker, including two CO2 cylinders and two carbonating bottles, ready for use.
Важлива інформація з безпеки
- Use only SodaStream carbonating bottles with your SodaStream Fountain Jet.
- Carbonate only plain water. Do not carbonate anything other than water.
- Do not add flavorings before carbonation. Add flavors only after water has been carbonated.
- Do not use the machine if the carbonating bottle is damaged, deformed, or scratched.
- Тримайте машину подалі від джерел тепла та прямих сонячних променів.
- Переконайтеся, що машина розміщена на рівній, стійкій поверхні під час використання.
- Не знімайте пляшку для газування під час карбонізації.
- Зберігати в недоступному для дітей місці.
Налаштування
1. Розпакування та початкова підготовка
Carefully remove all components from the packaging. Ensure you have the SodaStream Fountain Jet machine, carbonating bottle(s), and CO2 cylinder(s).
2. Installing the CO2 Cylinder
- Place the SodaStream machine on a flat, stable surface.
- Remove the back cover of the machine by gently pulling it outwards.
- Зніміть ущільнювач і кришку з балона з CO2.
- Insert the CO2 cylinder into the back of the machine, screwing it in firmly until it is securely in place. Do not overtighten.
- Встановіть задню кришку назад, переконавшись, що вона зафіксується на місці з клацанням.
Operating Your SodaStream Fountain Jet
1. Filling the Carbonating Bottle
Fill a SodaStream carbonating bottle with cold tap water up to the fill line. Ensure the water is cold for best carbonation results.
2. Attaching the Bottle
- Tilt the SodaStream Fountain Jet machine forward slightly.
- Insert the carbonating bottle into the snap-lock mechanism.
- Push the bottle upwards and backwards until it locks into place. The bottle should be held firmly by the machine.
Image: Visual guide showing the three simple steps: inserting the bottle, pressing the carbonation button, and pouring the sparkling water.
3. Газування води
Press the carbonating button firmly for 1-2 seconds, then release. Repeat this process 3-5 times for standard carbonation, or more for stronger fizz. You will hear a buzzing sound as the water carbonates.
Image: Close-up of the SodaStream machine actively carbonating water, illustrating the process of turning plain water into sparkling water.
4. Removing the Bottle
Once carbonation is complete, gently pull the carbonating bottle forward and then down to release it from the snap-lock mechanism.
5. Adding Flavors (Optional)
After carbonating, you can add SodaStream flavorings or other concentrates to your sparkling water. Always add flavors після carbonation, never before.
Image: A selection of SodaStream flavor drops, demonstrating the variety of options available to customize your sparkling beverages.
Технічне обслуговування та догляд
Очищення машини
Wipe the SodaStream Fountain Jet machine with a soft, damp cloth. Do not immerse the machine in water or wash it in a dishwasher. Avoid abrasive cleaners or sharp objects.
Cleaning Carbonating Bottles
Wash carbonating bottles with lukewarm water and a mild dish soap. Use a bottle brush if necessary. Do not wash bottles in a dishwasher or expose them to extreme temperatures, as this can damage the plastic. Replace bottles if they are scratched, deformed, or discolored.
CO2 Cylinder Replacement
When your CO2 cylinder is empty, replace it with a new SodaStream CO2 cylinder. Follow the installation steps outlined in the "Setup" section. Empty cylinders can often be exchanged for a discount on a new one at authorized retailers.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| No fizz or weak fizz | CO2 cylinder empty or not properly installed; water not cold enough; insufficient carbonation presses. | Replace or re-install CO2 cylinder; use colder water; press carbonation button 3-5 times firmly. |
| Water overflowing during carbonation | Bottle filled above the fill line; carbonating flavored water; bottle not securely attached. | Fill bottle only to the fill line; carbonate only plain water; ensure bottle is securely locked in place. |
| Machine not holding bottle securely | Bottle not inserted correctly into snap-lock. | Ensure bottle is pushed upwards and backwards until it clicks firmly into place. |
Технічні характеристики
- Назва моделі: Jet bundle
- Номер моделі: 1101178010
- Бренд: SodaStream
- Розміри (Д x Ш x В): 7.76 x 7.76 x 16.93 дюймів
- Вага товару: 11.65 фунта
- Carbonating Bottle Capacity: 1 літра
- CO2 Cylinder Capacity: Up to 60 Liters of sparkling water
- Джерело живлення: CO2 canister (no electricity required)
- Режим роботи: Manual pump action
- матеріал: пластик
- колір: чорний
- UPC: 818558023187
Гарантія та підтримка
SodaStream products typically come with a limited warranty. For detailed warranty information, product registration, and customer support, please visit the official SodaStream webсайту або зв’яжіться зі своїм відділом обслуговування клієнтів.
Ви можете знайти більше інформації та підтримки за адресою: www.sodastream.com
