вступ
Thank you for choosing the Wiltec 11-Piece T-Handle Hex Key Set. This manual provides essential information for the safe and effective use, setup, and maintenance of your new tool set. Please read these instructions carefully before use and retain them for future reference.
Продукт закінченийview
This high-quality hex key set, including a convenient storage stand, is designed for both DIY enthusiasts and professional craftsmen. The tools are constructed from robust chrome vanadium steel, ensuring high breaking strength and comfortable handling. The practical T-shaped cross handle and thermoplastic rubber grips facilitate maximum power transmission and provide a secure, comfortable grip.
Image: The complete Wiltec 11-piece T-handle hex key set, neatly organized in its black storage stand.
Ключові характеристики:
- матеріал: Solid Chrome Vanadium Steel for durability.
- Дизайн ручки: Ergonomic T-handle with thermoplastic rubber grips for enhanced comfort and torque.
- Точність: Guaranteed dimensional accuracy for reliable fastening.
- Зберігання: Includes a practical stand for secure storage and easy transport.
Вміст набору:
The set includes 10 hex keys and 1 storage stand. The hex key sizes are:
- Short Length (approx. 15 cm): 2 мм, 2.5 мм, 3 мм, 4 мм
- Medium Length (approx. 21 cm): 4.5 мм, 5 мм, 5.5 мм
- Long Length (approx. 28 cm): 6 мм, 8 мм, 10 мм
Зображення: Детальне view of the hex keys, illustrating the chrome vanadium steel construction, T-handle design, and various sizes.
Налаштування
The Wiltec T-Handle Hex Key Set comes pre-assembled in its storage stand. No complex setup is required.
- Розпакування: Carefully remove the hex key set from its packaging.
- Огляд: Inspect all hex keys and the stand for any signs of damage during transit. If any damage is found, do not use the product and contact customer support.
- Розміщення: Place the stand on a stable, flat surface in your workshop or storage area. The stand is designed to keep the keys organized by size for easy access.
Image: Close-up of the storage stand, showing the clearly marked sizes for each hex key slot.
Інструкція з експлуатації
Using the T-handle hex keys effectively requires proper selection and technique.
- Виберіть правильний розмір: Always choose the hex key that perfectly fits the fastener. Using an incorrect size can strip the fastener head or damage the key. The stand has clear size markings to assist you.
- Вставте ключ: Fully insert the hex end of the key into the fastener head. Ensure it is seated completely to prevent slippage.
- Grip the T-Handle: Hold the T-handle firmly with one or both hands. The thermoplastic rubber grips provide a comfortable and secure hold.
- Застосувати крутний момент:
- Для розпушування: Apply steady, counter-clockwise pressure. If the fastener is tight, apply gradual, increasing-сила.
- Для затягування: Apply steady, clockwise pressure. Avoid over-tightening, which can damage the fastener or the material.
- Using the Long Shaft: For fasteners in recessed areas, use the longer shaft of the hex key. The T-handle provides leverage even when the shaft is extended.
- Ball End (if applicable): Some hex keys may feature a ball end on the longer shaft, allowing for angled entry into the fastener head (up to 25 degrees). Use the straight end for maximum torque and to prevent rounding.
Safety Precaution: Always wear appropriate personal protective equipment, such as safety glasses, when using hand tools.
Технічне обслуговування
Proper maintenance will extend the life of your Wiltec hex key set.
- Прибирання: After each use, wipe down the hex keys with a clean, dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- Змащення: Periodically apply a light coat of rust-preventative oil to the metal shafts of the hex keys, especially if stored in a humid environment. Wipe off any excess.
- Зберігання: Always return the hex keys to their designated slots in the storage stand. Store the set in a dry, clean environment, away from direct sunlight and extreme temperatures.
- Огляд: Regularly inspect the hex keys for signs of wear, such as rounded edges, bends, or cracks. Damaged keys should be replaced immediately to prevent injury or damage to fasteners.
Усунення несправностей
Here are some common issues and their solutions when using hex keys:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Hex key slips or rounds the fastener head. | Incorrect key size; key not fully inserted; excessive force; worn key. | Ensure correct key size. Fully insert the key. Apply steady, controlled force. Replace worn keys. |
| Fastener is stuck or difficult to turn. | Rust or corrosion; over-tightened; thread locker applied. | Apply penetrating oil and allow it to soak. Use a rubber mallet to tap the key gently while turning. For thread locker, heat may be required (use caution). |
| Hex key bends or breaks. | Excessive force; prying with the key; manufacturing defect. | Do not use excessive force beyond the tool's design. Never use hex keys as pry bars. Replace damaged keys. Contact customer support if a defect is suspected. |
Технічні характеристики
| Атрибут | Деталь |
|---|---|
| Виробник | ВілТек |
| Номер моделі | 61287 |
| Розміри виробу (комплект) | 20.8 х 7.8 х 27.5 см |
| Вага товару | 1.2 кг |
| матеріал | Хромованадієва сталь |
| Закінчити | Chrome |
| Кількість штук | 11 (10 hex keys + 1 stand) |
| Key Sizes Included | 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8, 10 мм |
| Тип ручки | T-Handle with Thermoplastic Rubber Grips |
| Потрібні батареї | немає |
Інформація про гарантію
For detailed warranty information regarding your Wiltec 11-Piece T-Handle Hex Key Set, please refer to the official Wiltec webсайт або зверніться безпосередньо до служби підтримки клієнтів. Гарантійні умови можуть відрізнятися залежно від регіону та дати покупки.
Підтримка клієнтів
Should you have any questions, require technical assistance, or need to report an issue with your Wiltec product, please visit the official Wiltec website for contact information or reach out to the retailer from whom you purchased the product.
