DXQ FL-40GMB12V000001

DXQ FL-40 High Pressure Diaphragm Pump User Manual

Model: FL-40GMB12V000001 | Brand: DXQ

1. Вступ

Thank you for choosing the DXQ FL-40 High Pressure Diaphragm Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump. Please read it thoroughly before use to ensure safe and efficient performance.

DXQ FL-40 High Pressure Diaphragm Pump with clear filter housing

Figure 1: DXQ FL-40 High Pressure Diaphragm Pump

Ключові характеристики:

  • Міцний матеріал: Constructed from high-strength cast iron with powder coating, ensuring waterproof and rust-resistant properties for long-term use.
  • Powerful Automatic Pressure Pump: A fully automatic self-priming pump with a maximum flow rate of 17 L/min and an inlet PSI set to Max 40PSI (2.76Bar). Operates on 12V AC power.
  • Захист безпеки: Features built-in thermal protection and automatic pressure protection. Designed for long service life with quiet operation and no leakage.
  • Швидка установка: Compact size, lightweight design, and stable performance facilitate instant assembly.
  • Універсальні застосування: Suitable for various uses including food and beverage filling, liquid transfer, clean machine requirements, road work, and cooling systems.
Collage of various applications for the pump including kitchen sink, water heater, soda dispenser, agricultural drone, pressure washing, and solar water heater

Figure 2: Wide range of applications for the FL-40 pump

2. Техніка безпеки

Always observe the following safety precautions to prevent injury or damage to the pump.

  • Переконайтеся, що джерело живлення відповідає потужності насосаtagе вимоги (12 В).
  • Не експлуатуйте насос з пошкодженою проводкою або з'єднаннями.
  • Уникайте тривалої роботи насоса насухо, оскільки це може призвести до його пошкодження.
  • Забезпечте належну вентиляцію навколо насоса під час роботи.
  • Do not use the pump for flammable liquids or in explosive atmospheres.
  • Тримайте руки та вільний одяг подалі від рухомих частин.
  • Від’єднайте живлення перед виконанням будь-якого технічного обслуговування або усунення несправностей.
  • The pump features built-in thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before restarting.
Diagram showing the internal motor of the pump with an arrow indicating thermal protection

Figure 3: Thermal Protection feature of the pump

3. Компоненти в комплекті

The DXQ FL-40 High Pressure Diaphragm Pump package typically includes the following components:

  • 1 x Diaphragm Water Pump
  • 1 x фільтр
  • 3 x Fittings (various types for connection)
Крупним планом view of the included filter and various hose fittings

Figure 4: Included filter and fittings

Labeled diagram of the pump showing water outlet connector, stable bracket, pump wire, and water inlet connector

Figure 5: Key components and connections of the pump

4. Налаштування та встановлення

Follow these steps for quick and proper installation of your diaphragm pump:

  1. Монтаж: Securely mount the pump in a dry, well-ventilated area using the stable bracket. Ensure it is on a flat, stable surface to minimize vibration.
  2. Вхідне з'єднання: Connect the water inlet hose to the designated inlet port (often labeled 'Inlet' or indicated by an arrow pointing towards the pump). It is recommended to install the included filter on the inlet line to prevent debris from entering the pump.
  3. Підключення до розетки: Connect the water outlet hose to the designated outlet port (often labeled 'Outlet' or indicated by an arrow pointing away from the pump).
  4. Електричне підключення: Connect the pump's power wires to a 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). It is advisable to install an inline fuse for protection.
  5. Залийте насос (за потреби): While this is a self-priming pump, ensuring the inlet line is filled with water before the first use can aid in faster priming.
  6. Перевірте наявність витоків: After all connections are made, slowly introduce water into the system and check for any leaks at the fittings. Tighten connections as needed.
Diagram showing the pump connected to inlet and outlet hoses with a filter on the inlet, and an arrow indicating water flow direction

Figure 6: Fast assembly and water flow direction

5. Операція

Once installed, operating the DXQ FL-40 pump is straightforward:

  • Запуск насоса: Ensure all connections are secure and the power source is ready. Apply 12V DC power to the pump. The pump will begin to operate and self-prime.
  • Автоматична робота: The pump is designed to automatically turn on when water is demanded (e.g., a faucet is opened) and turn off when the demand stops and pressure builds up in the system.
  • Flow and Pressure: The pump delivers a maximum flow of 17 L/min and maintains pressure up to 40 PSI.
  • Моніторинг: Periodically check the pump for unusual noises, vibrations, or leaks during operation.

6. Технічне обслуговування

Регулярне технічне обслуговування забезпечує довговічність та оптимальну роботу вашого насоса:

  • Очищення фільтра: Regularly inspect and clean the inlet filter to prevent clogging and maintain optimal flow. Disconnect power, remove the filter housing, clean the mesh screen, and reassemble.
Comparison image showing the included metal filter on the left and a different type of filter on the right

Figure 7: The included metal filter for debris prevention

  • Перевірка підключення: Periodically check all hose and electrical connections for tightness and signs of wear.
  • Утеплення (за наявності): If the pump is used in an environment where temperatures drop below freezing, ensure it is drained completely or protected with RV antifreeze to prevent damage from freezing water.
  • Генеральне прибирання: Тримайте зовнішню частину насоса чистою та вільною від бруду та сміття.

7. Вирішення проблем

Зверніться до таблиці нижче, щоб дізнатися про поширені проблеми та їх вирішення:

проблемаМожлива причинаРішення
Насос не працюєNo power; Loose wiring; Blown fuse; Motor faultCheck power supply; Secure connections; Replace fuse; Contact support
Низький потік або тискClogged inlet filter; Kinked or restricted hose; Air in system; Low voltageClean filter; Straighten hose; Bleed air from system; Check power supply
Насос працює безперервноLeak in system; Pressure switch malfunction; Open faucetCheck for leaks and repair; Contact support for pressure switch; Close all faucets
Насос шумитьAir in system; Loose mounting; Debris in pumpBleed air; Secure mounting; Disconnect power and inspect pump (if safe)
Витік води з насосаLoose fittings; Damaged seals/diaphragmTighten fittings; Contact support for seal replacement

8. Технічні характеристики

Detailed specifications for the DXQ FL-40 Diaphragm Pump:

СпецифікаціяЗначення
ВиробникBananaB (DXQ)
Номер моделіFL-40GMB12V000001
Розміри продукту36 x 12 x 10 см (приблизно 14.2 x 4.7 x 3.9 дюймів)
вага2.4 кг (прибл. 5.3 фунта)
Колірчорний
СтильДіафрагма
матеріалЧавун
Джерело живлення12 В постійного струму
томtage12 вольт
Максимальна швидкість потоку17 літрів за хвилину
Максимальний тиск40 PSI (2.76 бар)
Максимальна висота підйому2 метрів
Батареї в комплекті?немає
Потрібні батареї?немає
Image showing the dimensions of the pump: 10 inches long, 4.3 inches wide, and 4.3 inches high

Figure 8: Pump dimensions

Close-up of the pump highlighting its cast iron material construction

Figure 9: Durable Cast Iron Material

9. Інформація про гарантію

For specific warranty terms and conditions, please refer to the product packaging or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

10. Підтримка клієнтів

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number and a detailed description of the issue for faster service.

Пов'язані документи - FL-40GMB12V000001

попередньоview Інструкція з встановлення та експлуатації витратоміра серії OMEGA FL-800
Вичерпний посібник з витратоміра серії OMEGA FL-800, що охоплює встановлення, експлуатацію, технічне обслуговування, поради щодо точності, технічні характеристики, попередження з техніки безпеки, гарантію та контактну інформацію.
попередньоview Керівництво з обслуговування паливної системи Nissan Frontier 2007 року випуску
Вичерпний посібник з обслуговування Nissan Frontier 2007 року випуску, що містить детальний опис процедур обслуговування паливної системи, включаючи запобіжні заходи, підготовку, паливний бак, паливний насос, паливний фільтр і блок датчика. Охоплює зняття, встановлення, розбирання, складання та технічні характеристики.
попередньоview Посібник з налаштування обертання кріплення об'єктива Fujinon та технічні характеристики
Детальний посібник з налаштування обертання байонетов об'єктивів камер Fujinon, включаючи покрокові інструкції та повний список моделей об'єктивів з їхніми розмірами сенсора та характеристиками крутного моменту.
попередньоview Посібник користувача Phoenix Contact FL SWITCH серії 1000
Цей посібник користувача містить вичерпні інструкції щодо некерованих вузьких комутаторів Ethernet серії FL SWITCH 1000 від Phoenix Contact. Він охоплює важливу інформацію щодо безпеки, встановлення, експлуатації, технічних даних та замовлення різних моделей, що забезпечує правильне розгортання та використання в промислових мережах.
попередньоview Інструкція з використання та технічні характеристики розумного освітлення GLEDOPTO RGB+CCT
Вичерпні інструкції користувача та технічні характеристики для інтелектуальних освітлювальних приладів GLEDOPTO RGB+CCT, включаючи пульти дистанційного керування, прожектори та садові лампи.amps. Дізнайтеся про функції, сумісність, встановлення та експлуатацію.
попередньоview Інструкція з встановлення та експлуатації лінійного дифузора Titus FlowBar Architectural
Вичерпний посібник з монтажу та експлуатації архітектурних лінійних дифузорів Titus FlowBar моделей FL-10, FL-15, FL-20, FL-25 та FL-30. Охоплює тверді стелі, акустичні стелі та процедури польового різання.