Genie 39165R

Керівництво користувача контролера відкривання гаражних воріт Genie 39165R

Models: 39165R, 34026A-R1, Series II, 37351R

вступ

This manual provides detailed instructions for the installation, operation, and maintenance of your Genie Garage Door Opener Controller, model 39165R. This controller is compatible with Genie garage door openers that use models 34026A-R1, Series II, and 37351R. Please read this manual thoroughly before use to ensure proper function and safety.

Genie Garage Door Opener Controller 39165R

A gray Genie garage door opener controller with a white faceplate, featuring a large primary button, lock/unlock icons, and a light bulb icon. The Genie logo is prominently displayed in red.

Важливі інструкції з безпеки

Налаштування та встановлення

Programming Your Controller

This section outlines the steps to program your new Genie Garage Door Opener Controller 39165R to your existing Genie garage door opener.

Step 1: Locate the Learn Button

The "Learn" button is typically found on the motor head of your garage door opener. Its color may vary (e.g., red, purple, orange, green). Refer to your specific garage door opener's manual if you cannot locate it.

Step 2: Initiate Programming

  1. Press and immediately release the "Learn" button on your garage door opener motor head. The LED indicator light next to the button will illuminate.
  2. Within 30 seconds, press and hold the desired button on your new 39165R controller for approximately 2 seconds.
  3. Release the button. The garage door opener's light will flash once, or you may hear a click, indicating successful programming.

Step 3: Test the Controller

Press the programmed button on your 39165R controller. The garage door should activate. If it does not, repeat the programming steps.

Інструкція з експлуатації

Your 39165R controller features buttons for opening/closing the garage door and controlling the opener's light.

Технічне обслуговування

Заміна батареї

The 39165R controller uses a standard coin cell battery (e.g., CR2032). When the range decreases or the LED indicator on the controller fails to light up, it's time to replace the battery.

  1. Locate the small screw or tab on the back or side of the controller casing.
  2. Use a small screwdriver or coin to open the casing.
  3. Carefully remove the old battery. Note its orientation (+/-).
  4. Вставте новий акумулятор, дотримуючись правильної полярності.
  5. Закрийте casinнадійно.

прибирання

Wipe the controller with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

Усунення несправностей

Поширені проблеми та рішення

If problems persist after attempting these solutions, consult a qualified garage door technician.

Технічні характеристики

Технічні характеристики продукту