вступ
This manual provides instructions for the installation and use of the Comelit 1126W/OK Intercom Push Button. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance.
Продукт закінченийview
The Comelit 1126W/OK is a white RAL 9010 push button designed for integration into an intercom system. It is intended to be inserted into the intercom base by removing the existing cover cap and occupies the space of one module.
Зображення 1: Components of the Comelit 1126W/OK Intercom Push Button. This image displays the main button module with screw terminals, a clear plastic cap, and a white plastic cap, illustrating the individual parts for assembly.
Налаштування та встановлення
- Приготування: Ensure the intercom system's power supply is disconnected before beginning installation to prevent electrical hazards.
- Locate Installation Slot: Identify the designated slot in your intercom base where the push button will be installed. This slot typically has a cover cap that needs to be removed.
- Remove Cover Cap: Carefully remove the existing cover cap from the intercom base.
- Електропроводка: Connect the necessary wires from the intercom system to the terminals on the back of the 1126W/OK push button module. Refer to your intercom system's wiring diagram for specific connections (e.g., 'S' for signal, '+' for power). Ensure secure connections.
- Insert Push Button: Gently insert the wired push button module into the vacant slot in the intercom base until it clicks securely into place. Ensure it is flush with the intercom panel.
- Увімкнення: Once the button is securely installed and wired, reconnect the power supply to the intercom system.
Примітка: If you are unsure about the wiring process, it is recommended to consult a qualified electrician or refer to the specific wiring diagram of your intercom system.
Інструкція з експлуатації
The Comelit 1126W/OK push button functions as a standard call button for your intercom system.
- Ініціювання дзвінка: To initiate a call to the indoor unit, simply press the button firmly.
- Підтвердження: Depending on your intercom system, you may hear an audible confirmation tone or see a visual indicator (e.g., an LED light) confirming the call has been placed.
Технічне обслуговування
The Comelit 1126W/OK push button requires minimal maintenance.
- Прибирання: Periodically wipe the surface of the button with a soft, damp тканиною. Уникайте використання абразивних засобів для чищення або розчинників, оскільки вони можуть пошкодити покриття.
- Огляд: Occasionally check for any loose connections or physical damage. If any damage is observed, disconnect power and address the issue or contact support.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Кнопка не реагує на натискання. |
|
|
| Call is initiated but no audio/video from intercom. |
|
|
Технічні характеристики
- Бренд: Коміліт
- модель: 1126W/OK
- Розміри продукту: 0.03 x 0.03 x 0.03 см (приблизно 0.01 x 0.01 x 0.01 дюймів)
- Вага товару: 4.54 грамів (приблизно 0.16 унції)
- колір: Білий (RAL 9010)
- ASIN: B07HNFQRLZ
- Перша доступна дата: 25 вересня 2018 р
Інформація про гарантію
Warranty information for the Comelit 1126W/OK Intercom Push Button is not available in the provided product data. Please refer to the manufacturer's official website or contact your retailer for specific warranty details.
Підтримка
For technical assistance or further inquiries regarding the Comelit 1126W/OK Intercom Push Button, please contact Comelit customer support or your authorized dealer. Contact details are typically available on the official Comelit webсайт.
You can visit the official Comelit webсайт для отримання додаткової інформації: www.comelitgroup.com
