BMW 61-12-2-448-168

Керівництво користувача кабелю ремонту задніх ліхтарів BMW 61-12-2-448-168

Model: 61-12-2-448-168 | Brand: BMW

Продукт закінченийview

The BMW 61-12-2-448-168 Cable is an Original Equipment Manufacturer (OEM) part designed specifically for the repair of tail lights. As a genuine BMW component, it ensures compatibility and maintains the high quality and effectiveness expected from your vehicle's original parts. This cable is crucial for restoring proper functionality to your vehicle's tail light system, providing a direct fit replacement.

Ключові характеристики

  • Genuine OEM - direct fit: Engineered to precisely match the original specifications of your BMW vehicle, ensuring seamless integration and performance.
  • Provides quality engine effectiveness: While primarily for tail lights, using genuine parts contributes to the overall integrity and reliable operation of the vehicle's electrical system.
  • BMW performance: Designed to meet BMW's rigorous standards for durability and functionality, ensuring long-lasting and dependable operation.
  • Водонепроникний: Features a waterproof design to protect against moisture ingress, enhancing longevity and reliability in various environmental conditions.

Що в коробці

Upon opening the package, you will find the following component:

  • 1 x BMW Genuine REPAIR CABLE TAIL LIGHTS:611013
Image of BMW 61-12-2-448-168 Tail Light Repair Cable

Figure 1: The BMW 61-12-2-448-168 Tail Light Repair Cable. This image shows the brown-colored cable with a black connector on one end and exposed wire on the other, designed for repairing vehicle tail light wiring.

Керівництво по установці

This repair cable is intended for use in automotive electrical systems, specifically for tail light repairs. Due to the complexity of vehicle electrical systems and the importance of proper installation for safety and functionality, Наполегливо рекомендується професійне встановлення кваліфікованим техніком. Incorrect installation can lead to electrical malfunctions, damage to vehicle components, or safety hazards.

General Installation Considerations (for professional reference):

  1. Безпека перш за все: Завжди від’єднуйте акумулятор автомобіля перед початком будь-яких електромонтажних робіт, щоб запобігти випадковому короткому замиканню або ураженню електричним струмом.
  2. Визначте несправність: Accurately diagnose the specific wiring fault within the tail light assembly that requires this repair cable.
  3. Access the Tail Light Assembly: Depending on the vehicle model, this may involve removing interior trim panels, trunk liners, or the tail light housing itself.
  4. Підготовка проводки: Carefully cut and strip the damaged wires as necessary. Ensure clean cuts and proper wire gauge matching.
  5. Connect the Repair Cable: Use appropriate automotive-grade connectors (e.g., crimp connectors, solder and heat shrink) to securely join the repair cable to the existing vehicle wiring. Ensure polarity is correct.
  6. Безпечні з'єднання: Insulate all connections thoroughly to prevent short circuits and protect against moisture and abrasion. The cable's waterproof feature aids in this.
  7. Тест функціональності: Before reassembling, reconnect the battery and test the tail light functionality (running lights, brake lights, turn signals, reverse lights) to ensure the repair is successful.
  8. Зберіть: Carefully reassemble all removed components, ensuring no wires are pinched or damaged.

Refer to your vehicle's specific service manual for detailed wiring diagrams and tail light assembly removal procedures.

Операція

The BMW 61-12-2-448-168 Repair Cable is a passive component of your vehicle's electrical system. Once correctly installed, its operation is integrated with the vehicle's existing tail light system. It facilitates the flow of electrical current to the tail lights, enabling them to illuminate as intended when the vehicle's lighting system is activated (e.g., headlights on, brake pedal pressed, turn signal engaged).

There are no user-adjustable settings or direct operational controls for the cable itself. Its function is to ensure reliable electrical connectivity for the tail lights.

Технічне обслуговування

As an automotive electrical component, the BMW 61-12-2-448-168 Repair Cable requires minimal direct maintenance once installed. However, periodic inspection of the vehicle's wiring harness, especially in areas exposed to environmental elements, is recommended as part of routine vehicle maintenance.

  • Візуальний огляд: During routine vehicle checks, visually inspect the area where the cable is installed for any signs of wear, fraying, corrosion, or damage to the insulation.
  • Чистота: Ensure the connections and surrounding areas are free from dirt, debris, and moisture. While the cable is waterproof, excessive accumulation can still lead to issues over time.
  • Безпечні з'єднання: Verify that all connections remain secure and tight. Loose connections can lead to intermittent electrical issues.
  • Уникайте стресу: Ensure the cable is not subjected to excessive pulling, bending, or abrasion from other vehicle components.

If any damage or unusual wear is observed, it is advisable to consult a qualified automotive technician for assessment and potential repair.

Усунення несправностей

If you experience issues with your tail lights after installing the BMW 61-12-2-448-168 Repair Cable, consider the following common troubleshooting steps. Note that complex electrical issues should always be diagnosed and repaired by a professional.

СимптомМожлива причинаРекомендована дія
Tail light not illuminating
  • Перегорів запобіжник
  • Несправна лампочка
  • Loose or corroded connection at the cable or bulb socket
  • Неправильна проводка під час монтажу
  • Check vehicle's fuse box for blown fuses related to tail lights.
  • Inspect and replace the tail light bulb if necessary.
  • Переконайтеся, що всі з'єднання надійні та не мають слідів корозії.
  • Re-check wiring against vehicle's service manual. Consult a professional.
Intermittent tail light operation
  • Послаблене з'єднання
  • Damaged wire within the harness (not the repair cable itself)
  • Corrosion at connection points
  • Перевірте та закріпіть усі з’єднання.
  • Check for signs of wear or damage on the vehicle's original wiring.
  • Clean any visible corrosion from terminals.
Other electrical issues after installation
  • Коротке замикання
  • Incorrect component installed
  • Damage to other vehicle systems during installation
  • Immediately disconnect battery.
  • Seek professional automotive electrical diagnosis.

If the issue persists after basic checks, it is strongly advised to have the vehicle inspected by a certified BMW service center or a qualified automotive electrician.

Технічні характеристики

АтрибутДеталь
БрендBMW
ВиробникBMW
Номер моделі товару61-12-2-448-168
Номер деталі виробника61-12-2-448-168
ASINB07HM7WWH5
ПозиціяRear (for tail lights)
ОсобливостіВодостійкий
Вага товару4 фунтів (приблизна вага доставки)
Розміри упаковки11 x 7 x 5 дюймів
Дата першої доступності23 вересня 2018 р

Гарантія та підтримка

As a Genuine BMW OEM part, this product is manufactured to the highest standards. Specific warranty details for OEM parts can vary and are typically covered under the vehicle's original warranty or a separate parts warranty provided by BMW. It is recommended to retain your purchase receipt.

For detailed warranty information, technical support, or assistance with installation, please contact your authorized BMW dealership or visit the official BMW webсайт. Ви також можете відвідати Магазин BMW на Amazon for more information on genuine BMW parts.

Пов'язані документи - 61-12-2-448-168

попередньоview Несправність електричної системи BMW F25 X3: Сервісний бюлетень із заміни запобіжника 100A
Сервісний бюлетень SIB 61 13 12 для моделей BMW F25 X3 (2010-2012), у якому детально описано причину, усунення та порядок дій у разі несправності електричної системи, спричиненої несправним запобіжником на 100 А в задньому розподільному блоці живлення.
попередньоview Список 5 старих деталей BMW - Повний каталог запасних частин
Детальний каталог старих запчастин для моделей BMW 5 серії (E12, E28, E34, E39, E60, F07, F10, F11, F13, G30). Містить номери деталей, описи, кількість та ціни. Необхідний для технічного обслуговування та ремонту BMW.
попередньоview BMW Serie 3 Window Regulator Installation Guide - Assembly Instructions
Detailed assembly and installation instructions for replacing the window regulator on a BMW Serie 3 (02/05). Includes steps, maintenance tips, and diagram references.
попередньоview BMW 5 Series E60/E61 LCI Headlight and Taillight Conversion Installation Instructions
Official installation guide for the LCI conversion retrofit kit for BMW 5 Series E60 Saloon and E61 Touring models (from 03/05). Details parts, preparatory work, wiring, and installation steps for BiXenon or AHL equipped vehicles.
попередньоview Методи ремонту зовнішньої алюмінієвої панелі BMW: вичерпний посібник
Ознайомтеся з основними методами ремонту зовнішніх алюмінієвих панелей кузова автомобілів BMW. Цей посібник охоплює матеріалознавство, інструменти, обробку металу, реставрацію та захисні заходи для ефективного ремонту після зіткнень.
попередньоview Інструкції з ремонту лобового та заднього скла BMW X5 (E53)
Детальні інструкції з ремонту та зняття лобового та заднього скла на BMW X5 30i (E53) 2001-2003 років випуску, що охоплюють клеї, інструменти, безпеку та процедури.