Посібник користувача принтера штрих-кодів Wasp 633809003226

1. Вступ

This manual provides comprehensive instructions for the setup, operation, and maintenance of the Wasp 633809003226 Barcode Printer. The WPL308 desktop barcode printer is a versatile medium-duty barcode printer designed to support a wide range of printing applications. It features a durable double-wall clamshell design, a 3.5-inch color TFT display with real-time clock, and supports both thermal transfer and direct thermal printing. With a printing speed of up to 8 inches per second at 203 dpi resolution and ample memory (128 MB Flash and 128 MB SDRAM), it is suitable for printing high-volume 4x6 shipping labels, high-resolution product markings, graphic solutions, and labels for electronics marking applications.

2. Продукт закінчивсяview

The Wasp 633809003226 Barcode Printer is engineered for efficiency and reliability. Key features include:

• Up to 203 mm (8 in) per second print speed, ensuring fast label production.
• Equipped with 128 MB Flash memory and 128 MB SDRAM memory for robust performance.
• MicroSD flash memory expansion slot, supporting up to 32 GB for extensive storage needs.
• Standard interfaces include Serial, internal Ethernet, USB 2.0, and USB Host for versatile connectivity.
• Features a 3.5-inch TFT display for easy navigation and status monitoring.

Малюнок 2.1: Спереду view of the Wasp 633809003226 Barcode Printer. The printer is shown actively printing labels, with its 3.5-inch color TFT display visible, showing interface and sensor settings. The Wasp logo is prominently displayed on the front panel.

3. Інструкції з налаштування

Follow these steps to set up your Wasp Barcode Printer:

1. Розпакування: Carefully remove the printer and all accessories from the packaging. Verify that all components listed in the packing list are present.
2. Розміщення: Place the printer on a stable, flat surface with adequate ventilation. Ensure there is enough space around the printer for proper operation and maintenance.
3. Підключення живлення: Connect the power adapter to the printer's power port and then plug the power cord into a grounded electrical outlet. Do not power on the printer yet.
4. Завантаження медіа:
   • Відкрийте верхню кришку принтера.
   • Insert the label roll onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
   • Thread the labels through the media guides and under the print head assembly. Adjust the media guides to fit the width of your labels.
   • Надійно закрийте верхню кришку.
5. Підключення до комп'ютера:
   • Для USB-підключення: підключіть один кінець USB-кабелю до USB-порту принтера, а інший кінець – до USB-порту комп’ютера.
   • For Ethernet connection: Connect an Ethernet cable from the printer's Ethernet port to your network router or switch.
6. Встановлення драйвера:
   • Увімкніть принтер за допомогою вимикача живлення.
   • Insert the driver CD (if provided) into your computer's CD-ROM drive, or download the latest drivers from the official Wasp support webсайт.
   • Дотримуйтеся вказівок на екрані, щоб завершити встановлення драйвера.
7. Калібрування: After installing drivers and loading media, perform a media calibration through the printer's utility software or directly from the printer's display menu (refer to the display options like "Sensor" and "Interface" as seen in Figure 2.1). This ensures accurate label detection and printing.

4. Інструкція з експлуатації

Once the printer is set up and drivers are installed, you can begin printing labels:

1. Підготовка програмного забезпечення: Open your label design software (e.g., WaspLabeler, Bartender, or other compatible software).
2. Створіть свою етикетку: Create or open your label design. Ensure the label dimensions in the software match the physical labels loaded in the printer.
3. Виберіть принтер: In your software's print settings, select the "Wasp 633809003226 Barcode Printer" as your output device.
4. Configure Print Settings: Adjust print settings such as darkness, speed, and number of copies as needed. Ensure the correct print language (TSPL or ZPL2, as indicated on the printer's display in Figure 2.1) is selected if applicable.
5. Друк: Click the "Print" button in your software. The printer will begin printing your labels.
6. Моніторинг: Monitor the printer's display for status messages or errors during the printing process.

5. Технічне обслуговування

Регулярне технічне обслуговування забезпечує оптимальну продуктивність і подовжує термін служби вашого принтера:

• Очищення друкувальної голівки:
  • Вимкніть принтер і від’єднайте шнур живлення.
  • Відкрийте вузол друкуючої головки.
  • Using a lint-free cloth or cotton swab lightly dampened with isopropyl alcohol, gently wipe the print head surface. Allow it to dry completely before closing the printer.
• Очищення валика подачі:
  • With the printer off, gently rotate the platen roller and wipe its surface with an isopropyl alcohol-dampened cloth to remove adhesive residue or dust.
• Генеральне прибирання: Use a soft, dry cloth to wipe the exterior of the printer. Avoid using abrasive cleaners or solvents.
• Заміна носія: Replace label rolls and thermal transfer ribbons (if using thermal transfer mode) as they run out to prevent printing interruptions.

6. Вирішення проблем

Зверніться до наступної таблиці, щоб знайти поширені проблеми та їх вирішення:

7. Технічні характеристики

Detailed technical specifications for the Wasp 633809003226 Barcode Printer:

8. Гарантія та підтримка

For detailed warranty information, please refer to the documentation included with your product or visit the official Wasp website. For technical support, driver downloads, and additional resources, please visit the manufacturer's support page or contact their customer service.

You may also find general information about thermal printers and related technologies at www.tscprinters.com, a common resource in the industry.