Intel Solid State Drive SSDSC2KG019T801 User Manual

1. Вступ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intel Solid State Drive (SSD) D3-S4610 Series, model SSDSC2KG019T801. Designed for server and data center environments, this 1.92TB 2.5-inch SATA 6Gb/s SSD offers reliable and high-performance storage solutions. Please read this manual thoroughly before proceeding with installation or use.

2. Продукт закінчивсяview

The Intel SSD D3-S4610 Series is a high-capacity, enterprise-grade solid-state drive built for read-intensive workloads. It utilizes 3D NAND TLC technology to deliver consistent performance and endurance. Its 2.5-inch form factor and SATA 6Gb/s interface ensure broad compatibility with server and storage systems.

Рисунок 1: Кутовий view of the Intel SSD D3-S4610 Series, showing the SATA connector and mounting screw holes.

Рисунок 2: Зверху вниз view of the Intel SSD D3-S4610 Series, highlighting the Intel logo and product design.

3. Технічні характеристики

4. Налаштування та встановлення

Before installing the SSD, ensure your system is powered off and disconnected from the power source. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.

4.1 Фізичне встановлення

1. Підготуйте свою систему: Open your computer case or server chassis. Locate an available 2.5-inch drive bay. If your system only has 3.5-inch bays, you may need a 2.5-inch to 3.5-inch adapter bracket (not included).
2. Монтування SSD: Slide the SSD into the drive bay. Secure it with screws on both sides of the drive bay, if applicable.
3. Підключіть кабелі:
   • Connect one end of a SATA data cable to the SATA port on the SSD and the other end to an available SATA port on your motherboard or RAID controller.
   • Підключіть кабель живлення SATA від блока живлення (БЖ) до роз'єму живлення на SSD-накопичувачі.
4. Закрийте систему: Once the SSD is securely installed and connected, close your computer case or server chassis.

4.2 Initializing the SSD (Operating System Setup)

After physical installation, the SSD needs to be initialized and formatted by your operating system before it can be used for storage.

1. Увімкніть систему: Boot your computer or server.
2. Access Disk Management (Windows):
   • Клацніть правою кнопкою миші на кнопці «Пуск» і виберіть «Керування дисками».
   • The new SSD should appear as "Disk [number]" and be marked as "Unallocated".
   • If prompted to initialize the disk, choose GPT (таблиця розділів GUID) for drives larger than 2TB or for modern systems, or MBR (Master Boot Record) for older systems or smaller drives. Click OK.
   • Right-click on the "Unallocated" space and select "New Simple Volume". Follow the wizard to assign a drive letter and format the drive (NTFS is common for Windows).
3. Access Disk Utility (macOS):
   • Відкрийте «Дискову утиліту» з меню Програми > Утиліти.
   • Select the new SSD from the sidebar.
   • Click "Erase" and choose a format (e.g., APFS or Mac OS Extended (Journaled)) and a scheme (GUID Partition Map). Click Erase.
4. Linux:
   • Використовуйте такі інструменти, як fdisk or gparted to partition and format the drive. Common file systems include ext4, XFS, or Btrfs.

5. Робота з SSD-накопичувачем

Once initialized and formatted, your Intel SSD will function like any other storage drive. For optimal performance and longevity, consider the following:

• Підтримка TRIM: Ensure your operating system has TRIM enabled. TRIM helps maintain the performance of the SSD over time by allowing the OS to inform the SSD which data blocks are no longer in use and can be wiped internally. Most modern operating systems (Windows 7+, macOS 10.6.8+, Linux kernel 2.6.33+) support TRIM automatically.
• Уникайте дефрагментації: Unlike traditional hard drives, SSDs do not benefit from defragmentation. In fact, defragmenting an SSD can reduce its lifespan by increasing unnecessary write cycles. Disable any automatic defragmentation schedules for your SSD.
• Over-provisioning (Advanced Users): For enterprise environments, setting aside a small percentage of the drive's capacity as over-provisioning can improve performance and endurance, especially under heavy write workloads. This is typically managed through enterprise storage software or specific SSD utilities.
• Передача даних: For large data transfers, ensure your SATA controller is operating in AHCI mode in your system's BIOS/UEFI settings for best performance.

6. Технічне обслуговування

Правильне обслуговування забезпечує довговічність та оптимальну продуктивність вашого SSD-накопичувача.

• Оновлення прошивки: Періодично перевіряйте підтримку Intel website for firmware updates for your SSD model. Firmware updates can improve performance, stability, and address known issues. Follow Intel's instructions carefully when performing firmware updates.
• SSD Health Monitoring: Use S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) tools to monitor the health and lifespan of your SSD. Many operating systems and third-party utilities provide access to S.M.A.R.T. data. Key metrics to watch include "Wear Leveling Count" and "Media Wearout Indicator".
• Резервне копіювання даних: Regularly back up critical data from your SSD to another storage device. While SSDs are highly reliable, no storage device is immune to failure.
• Secure Erase (Advanced): If you need to securely wipe all data from the SSD, use a secure erase utility. This process permanently deletes all data and restores the drive to its factory performance state. Be extremely cautious as data cannot be recovered after a secure erase.

7. Вирішення проблем

This section addresses common issues you might encounter with your Intel SSD.

7.1 SSD не виявлено

• Check physical connections: Ensure both the SATA data cable and SATA power cable are securely connected to the SSD and the motherboard/PSU.
• Verify BIOS/UEFI settings: Enter your system's BIOS/UEFI setup. Check if the SATA port the SSD is connected to is enabled. Ensure the SATA controller mode is set to AHCI (recommended) or IDE/RAID, depending on your setup.
• Try a different port/cable: Test the SSD with a different SATA data cable, power cable, or SATA port on your motherboard/controller.
• Перевірте живлення: Переконайтеся, що ваш блок живлення (БЖ) має достатню потужністьtagта наявні роз'єми живлення SATA.
• Керування дисками/Дискова утиліта: After booting, check Disk Management (Windows) or Disk Utility (macOS/Linux) to see if the drive is detected but uninitialized. Refer to Section 4.2.

7.2 Повільна продуктивність

• TRIM status: Verify that TRIM is enabled for your operating system.
• Режим SATA: Переконайтеся, що ваш SATA-контролер налаштовано на режим AHCI в BIOS/UEFI.
• Оновлення драйверів: Переконайтеся, що драйвери SATA-контролера вашої материнської плати оновлені.
• SSD Firmware: Check for and apply any available firmware updates for the SSD.
• Надмірне виділення ресурсів: If the drive is heavily used, consider implementing over-provisioning if not already done.
• System resources: Ensure your system has adequate RAM and CPU resources, as these can impact overall storage performance.

7.3 Drive Errors or Corruption

• Виконати перевірку диска: Use your operating system's built-in disk checking tools (e.g., `chkdsk` on Windows, First Aid in Disk Utility on macOS).
• S.M.A.R.T. Data: Check the S.M.A.R.T. data for any warning signs of impending failure.
• Reformat: As a last resort, if data is backed up, reformatting the drive can resolve persistent corruption issues.

8. Гарантія та підтримка

Intel provides support for its products. For detailed warranty information, technical support, and driver/firmware downloads, please visit the official Intel support webсайт. Зберігайте чек про покупку для гарантійних претензій.

While this product does not explicitly come with a data recovery plan from Intel, third-party data recovery plans may be available for purchase separately, such as 2-Year or 3-Year Data Recovery Plans, which can provide additional peace of mind for your valuable data.

For further assistance, please contact Intel Customer Support through their official channels.