вступ
This manual provides essential information for the proper installation, operation, and maintenance of your HOBBYWING JUSTOCK G2.1 brushless motor. Designed for 1/10 and 1/12 scale RC vehicles, this motor is compliant with ROAR and IFMAR rules, featuring zero timing for spec racing.
Key features include a heat-resistant magnet attached aluminum case, double insulated windings, high precision bearings, and a robust rotor structure for durability and performance. The built-in Hall sensor and non-adjustable end bell ensure smooth and linear power delivery.
Інформація про безпеку
УВАГА: This item is not a toy. It contains small parts and electrical components. Adult supervision is recommended during assembly and operation, especially for users under 16 years of age.
- Always disconnect the battery before performing any maintenance or installation.
- Забезпечте належну вентиляцію під час роботи, щоб запобігти перегріву.
- Уникайте контакту з рухомими частинами під час роботи.
- Do not expose the motor to water or excessive moisture unless specifically designed for such conditions.
- Use only compatible electronic speed controllers (ESCs) and batteries.
Налаштування та встановлення
Proper installation is crucial for optimal performance and longevity of your motor.
1. Mounting the Motor
Securely mount the motor to your vehicle's motor mount using appropriate screws. Ensure the motor is aligned correctly with the pinion gear to prevent excessive wear and friction.
Малюнок 1: Сторона view of the HOBBYWING JUSTOCK G2.1 Brushless Motor, showing the sensor port and mounting holes.
2. Підключення проводів
Connect the motor to your Electronic Speed Controller (ESC) according to the ESC's instructions. Typically, the three motor wires (A, B, C) connect to the corresponding output terminals on the ESC. Ensure correct polarity and secure connections.
- Кабель датчика: Connect the sensor cable from the motor to the sensor port on your ESC. This is essential for sensored operation and smooth low-speed performance.
- Підключення акумулятора: Connect your battery to the ESC, ensuring correct polarity. The motor supports 2S-3S LiPo batteries.
Малюнок 2: Верх view of the HOBBYWING JUSTOCK G2.1 Brushless Motor, indicating the A, B, C terminals for ESC connection and the fixed timing end bell.
3. Gear Ratio Selection
Select an appropriate gear ratio for your vehicle and track conditions. Refer to your vehicle's manual or consult experienced users for recommendations. Incorrect gearing can lead to overheating and reduced performance.
Інструкція з експлуатації
Once installed and connected, the HOBBYWING JUSTOCK G2.1 motor is ready for operation. This motor is designed for zero timing spec racing.
- Початкове включення: Спочатку увімкніть передавач, а потім підключіть акумулятор до ESC.
- Калібрування: If necessary, calibrate your ESC with the motor and transmitter according to your ESC's manual.
- Запуск: Operate your RC vehicle as usual. Monitor motor temperature during initial runs to ensure proper gearing and setup.
- Вимкнення: Спочатку від'єднайте акумулятор від ESC, а потім вимкніть передавач.
This motor is perfectly matched with the HOBBYWING XR10-JUSTOCK ESC for all zero timing spec racing and is also compatible with other HOBBYWING electronic speed controllers and other brands.
Технічне обслуговування
Regular maintenance will prolong the service life and improve the operating efficiency of your JUSTOCK motor.
- Прибирання: The motor features a detachable structure design for daily cleaning. Carefully disassemble the motor (if comfortable) to clean out dirt, dust, and debris from the internal components. Use compressed air or a soft brush.
- Перевірка підшипників: Periodically check the motor bearings for smooth operation. Replace worn or noisy bearings to maintain efficiency.
- O-Ring Seal: The silicone O-ring seal between the end bell and stator helps conduct inner heat and prevent dust. Ensure it is clean and properly seated.
- Перевірка підключення: Регулярно перевіряйте всі з'єднання проводів на наявність ознак зносу, корозії або ослаблення кріплення.
Усунення несправностей
If you encounter issues with your motor, consider the following common troubleshooting steps:
- Двигун не працює:
- Check all wiring connections between the motor, ESC, and battery.
- Переконайтеся, що акумулятор заряджений і правильно підключений.
- Verify ESC calibration with the transmitter.
- Inspect the sensor cable for damage or improper connection.
- Перегрів:
- Check your gear ratio; it might be too aggressive.
- Ensure there is adequate airflow to the motor.
- Verify that the motor is not binding or experiencing excessive friction.
- Irregular Performance / Cogging:
- Re-check sensor cable connection and ensure it's not damaged.
- Ensure all motor phase wires are securely connected.
- Check for debris inside the motor.
If problems persist, contact HOBBYWING customer support or consult with an experienced RC hobbyist.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | ХОБІНГ |
| Назва моделі | Hobby Wing 30408013 Xerun Justock 3650 Sd G2.1 Sensored Brushless Motor, 25.5 1600kV |
| Номер моделі товару | 30408013 |
| томtage | 16.8 Volts (Supports 2S-3S LiPo) |
| матеріал | Алюміній |
| Вага товару | 8.1 унції |
| Розміри продукту | 2.88 x 4.5 x 2 дюймів |
| Рекомендований вік | 16 років і старше |
| Відповідність | ROAR and IFMAR rules |
Гарантія та підтримка
Legal Disclaimer and Warranty Information
Because HOBBYWING has no control over the use, installation, or maintenance of this product, no liability may be assumed for any damage or losses resulting from the use of the product. HOBBYWING does not assume responsibility for any losses caused by unauthorized modifications to its products. HOBBYWING reserves the right to modify product design, appearance, features, and usage requirements without prior notification.
HOBBYWING is only responsible for the product cost. Products purchased from Hong Kong / Chinese retailers may not conform to CE / North America regulations, and such products are deemed non-warranty. Discount / auction stores such as eBay are considered "non-authorized sales channels" in North America, and products purchased from these channels are also deemed non-warranty.
Підтримка клієнтів
For technical assistance or further inquiries, please visit the official HOBBYWING website or contact your local authorized dealer. Ensure you have your product model number (30408013) and purchase details available when seeking support.
