Littelfuse FLNR045

Інструкція з експлуатації

Littelfuse FLNR045 FUS 250V T/D Class RK5 45A

1. Вступ

This manual provides essential information for the safe and effective use of the Littelfuse FLNR045 FUS 250V T/D Class RK5 45A fuse. Please read this manual thoroughly before installation or operation and retain it for future reference. This fuse is designed for use in panel accessories and electrical systems requiring reliable overcurrent protection.

2. Інформація про безпеку

УВАГА: Electrical shock hazard. Improper installation or use of this product can result in serious injury or death. Always follow local electrical codes and safety regulations.

3. Опис та характеристики продукту

The Littelfuse FLNR045 is a 45 Amp, 250 Volt, Class RK5, dual-element, time-delay fuse. It is designed to provide superior protection for motors and other inductive loads against both overloads and short-circuits. Its time-delay characteristic allows for temporary inrush currents without nuisance opening, while still providing fast-acting protection under short-circuit conditions.

Littelfuse FLNR045 Class RK5 Time-Delay Fuse

Figure 3.1: A Littelfuse FLNR045 Class RK5 time-delay fuse. This image shows the cylindrical body of the fuse with the Littelfuse brand and "CLASS RK5 Time Delay Dual Element" visible on its label.

Ключові характеристики:

4. Налаштування та встановлення

Installation of the FLNR045 fuse should only be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

  1. De-energize Circuit: Before beginning any work, ensure that the circuit where the fuse is to be installed or replaced is completely de-energized. Verify with a voltagтестер.
  2. Identify Fuse Holder: Locate the appropriate fuse holder or disconnect switch for the circuit requiring protection.
  3. Вставте запобіжник: Carefully insert the FLNR045 fuse into the fuse clips or holder, ensuring a secure and proper connection. Do not force the fuse.
  4. Перевірте встановлення: Double-check that the fuse is seated correctly and that all connections are tight.
  5. Re-energize Circuit: Після завершення та перевірки встановлення відновіть живлення кола.

It is critical to match the fuse's voltagе і amperage ratings to the circuit's requirements. Using a fuse with an incorrect rating can lead to system failure or hazardous conditions.

5. Принципи роботи

The Littelfuse FLNR045 is a current-limiting, time-delay fuse. This means it is designed to:

The time-delay feature is particularly beneficial in circuits with inductive loads that draw high inrush currents upon startup, preventing unnecessary fuse blows and ensuring continuous operation.

6. Технічне обслуговування

Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system maintenance.

7. Вирішення проблем

If a circuit protected by the FLNR045 fuse loses power, the fuse may have blown due to an overcurrent condition. Follow these steps:

  1. De-energize Circuit: Immediately disconnect power to the affected circuit at the main panel.
  2. Визначення перегорілого запобіжника: Carefully remove the fuse (using appropriate tools if necessary) and test it with a multimeter for continuity. A blown fuse will show an open circuit (no continuity).
  3. Investigate Cause: Before replacing the fuse, identify and rectify the cause of the overcurrent. Common causes include:
    • Short-circuit in wiring or equipment.
    • Overloaded circuit (too many devices drawing power).
    • Faulty appliance or motor.
  4. Замінити запобіжник: Once the fault is cleared, replace the blown fuse with a new Littelfuse FLNR045 fuse. Ensure the replacement fuse has the exact same ratings.
  5. Re-energize and Monitor: Restore power and monitor the circuit for proper operation. If the new fuse blows immediately, there is still an unresolved issue in the circuit that requires professional attention.

Do not repeatedly replace fuses without addressing the underlying problem, as this can lead to serious electrical hazards.

8. Технічні характеристики

СпецифікаціяЗначення
Номер моделіFLNR045
БрендLittelfuse
томtage Рейтинг250 Вольт змінного струму
Amperage Рейтинг45 Amps
Клас запобіжникаRK5
ХарактеристикаTime-Delay, Dual-Element
матеріалStone (Insulating Body)
ВідповідністьВнесено до списку UL
КатегоріяPanel Accessories, Fuse

9. Гарантія та підтримка

For information regarding warranty, technical support, or service for your Littelfuse FLNR045 fuse, please contact Littelfuse directly through their official webсайт або канали обслуговування клієнтів. Зберігайте чек про покупку для будь-яких гарантійних претензій.

Littelfuse Official Webсайт: www.littelfuse.com

Пов'язані документи - FLNR045

попередньоview Запобіжники Littelfuse серії JLLN класу T | Швидкодіючі, висока захисна здатність
Explore Littelfuse JLLN Series Class T fuses, offering compact design, fast-acting overload and short-circuit protection, and high interrupting ratings up to 200,000 AIR. Ideal for drives, inverters, and power supplies. View specifications, ordering information, and dimensions.
попередньоview Технічний опис діодів Littelfuse P6SMB серії 600 Вт для поверхневого монтажу TVS
Технічний опис для Littelfuse P6SMB серії 600 Вт для поверхневого монтажу, перехідний об'ємtagДіоди з супресорним (TVS) перенапругою. Включає характеристики, переваги, електричні характеристики, номінали, криві, параметри паяння, фізичні та екологічні характеристики, а також інформацію про нумерацію деталей.
попередньоview Посібник з модифікації коефіцієнта витків КТ: Технічна примітка Littelfuse
Дізнайтеся, як змінити коефіцієнт витків трансформаторів струму (КТ) Littelfuse за допомогою цієї технічної нотатки, включаючи методи додавання та віднімання витків, а також практичні приклади.ampРозуміння принципів роботи КТ та регулювання коефіцієнта перетворення.
попередньоview Технічний опис мікромініатюрного тактильного перемикача SMT з верхнім приводом серії PTS526
Технічний опис мікромініатюрного тактильного перемикача Littelfuse серії PTS526 SMT з верхнім керуванням. Має розміри 5.2 x 5.2 мм, змінну висоту та кілька сил спрацьовування, підходить для IoT, домашньої автоматизації та дистанційного керування. Містить детальні специфікації, механічні характеристики, розміри та інформацію для замовлення.
попередньоview Моніторинг замикання на землю в системах з регульованою швидкістю приводів | Технічна примітка Littelfuse
Технічна примітка від Littelfuse щодо моніторингу замикання на землю для приводів з регульованою швидкістю (ЧРШ) з використанням реле серій SE-700 та EL731. Охоплює проблеми, фільтрацію, рекомендовані налаштування та розташування трансформатора струму для систем із заземленням за допомогою резистивного струму.
попередньоview Технічний опис датчика швидкості на шестернях Холла Littelfuse серії 55505
Технічний опис датчика швидкості Littelfuse серії 55505 з фланцевим кріпленням на основі ефекту Холла, що детально описує його характеристики, застосування, електричні характеристики та систему нумерації деталей для промислового, комерційного та автомобільного використання.