EVERSECU 9 Channel DC12V 5 Amp PTC Fuse CCTV Power Supply

1. Продукт закінчивсяview

The EVERSECU 9 Channel DC12V 5 Amp PTC Fuse CCTV Power Supply is designed to provide stable and reliable power to multiple security cameras, DVRs, and IP cameras. Encased in a durable metal box with a lock, this unit ensures secure power distribution for your surveillance system. Each output channel features an independent PTC resettable fuse and LED indicator, offering protection against overloads and short circuits, thereby enhancing system reliability and minimizing downtime.

Малюнок 1.1: Спереду view of the EVERSECU CCTV Power Supply box.

2. Ключові характеристики

• Вхідний об'ємtage: 100-240VAC, ensuring compatibility with various power grids.
• Вихід: Stable 12VDC with a total supply current of 5Amp.
• Канали: 9 independent output channels, each with a maximum current of 1.1Amp.
• Individual PTC Fuse Protection: Each output has an independent PTC resettable fuse and LED indicator. In case of a problem, only the affected output is impacted, allowing other channels to continue functioning.
• Circuit Short Protection: PTC fuses automatically open the circuit during a short condition and reset once the condition is removed.
• Високий волtage Захист: Integrated surge protection safeguards connected devices from high voltage шипи.
• Захист від струму: The power supply automatically enters a self-protection status during overcurrent events and returns to normal operation when the condition is resolved.
• Міцний металевий корпус: Compressive, wear-resisting, and reinforced enclosure structure for enhanced safety and convenience.
• Безпека: Includes a lock with keys for secure installation.

3. Інструкції з налаштування

3.1. Розпакування та перевірка

Carefully unpack the power supply unit and inspect it for any signs of damage during transit. Ensure all components listed below are present.

Рисунок 3.1: Комплектуючі.

3.2. Монтаж пристрою

Choose a suitable, dry, and well-ventilated location for mounting the power supply box. Use appropriate screws and anchors (included) to securely fasten the unit to a wall or other stable surface. Ensure the unit is mounted in a location that allows for proper cable management and access for maintenance.

3.3. Connecting AC Input Power

Connect the provided AC power cord to the AC input port on the side of the power supply box. Ensure the power cord is securely plugged into a grounded electrical outlet (100-240VAC). The unit features an external AC plug for convenience.

Figure 3.2: AC input port location.

3.4. Connecting DC Outputs to Devices

Open the metal box using the provided keys. Locate the DC output terminals inside the box. Each pair of terminals (positive and negative) corresponds to an independent channel. Connect the DC power cables from your security cameras, DVRs, or IP cameras to the respective terminals. Ensure correct polarity (positive to positive, negative to negative) to prevent damage to your devices.

Figure 3.3: Internal layout with wiring terminals.

It is recommended to label each power supply output to correspond with the connected camera or device for easier identification and troubleshooting.

Figure 3.4: Close-up of PTC fuses and terminals.

3.5. Випtage Adjustment (if necessary)

Вихідний обtage is adjustable within a range of DC11.78V-DC15V to compensate for voltage drop over longer cable runs. Use a small screwdriver to carefully adjust the voltage potentiometer located on the main board if your devices require a slightly higher voltage due to cable length.

4. Інструкція з експлуатації

4.1. Увімкнення

Once all connections are secure, plug the AC power cord into the wall outlet. The power supply unit will automatically power on. The LED indicators for each channel will illuminate, indicating that power is being supplied to the connected devices.

Figure 4.1: LED indicators.

4.2. Understanding LED Indicators and PTC Fuses

Each output channel has a dedicated LED indicator. A lit LED signifies that the channel is receiving power and functioning correctly. If an LED is off, it indicates a potential issue with that specific channel, such as a short circuit or overcurrent, which has caused the PTC fuse to trip.

The PTC (Positive Temperature Coefficient) fuses are self-resetting. If a short circuit or overcurrent occurs on a channel, the corresponding PTC fuse will heat up and increase its resistance, effectively cutting off power to that channel. Once the fault is removed and the fuse cools down, it will automatically reset and restore power to the channel.

5. Технічне обслуговування

• Регулярне прибирання: Keep the power supply unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• Вентиляція: Ensure the ventilation openings on the unit are not obstructed to allow for proper airflow and heat dissipation.
• Перевірки підключення: Періодично перевіряйте всі з'єднання проводів, щоб переконатися в їх надійності та відсутності корозії.
• Умови навколишнього середовища: Operate the unit within its specified temperature and humidity ranges to ensure optimal performance and longevity.

6. Вирішення проблем

7. Технічні характеристики

Рисунок 7.1: Технічні характеристики продуктуview.

8. Гарантія та підтримка

EVERSECU products are manufactured to high-quality standards and are backed by the manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the official EVERSECU brand store or contact their customer service directly.

You can visit the EVERSECU Store for more information and support: EVERSECU Brand Store