AVANTEK CB-12 Mini Wireless Doorbell Instruction Manual

вступ

Welcome to the AVANTEK CB-12 Mini Wireless Doorbell. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before use.

Вміст упаковки

• 1 x Transmitter (Push Button)
• 2 шт. штекерні приймачі
• 1 х клейка стрічка
• 2 х гвинти
• 2 х Анкери
• 1 х викрутка
• 1 x Посібник користувача (цей документ)
• 1 батарейка CR2 (попередньо встановлена ​​в передавачі)

Продукт закінченийview

The AVANTEK CB-12 system consists of a waterproof push-button transmitter and two plug-in receivers. Each component features an LED indicator for visual alerts.

Image: The AVANTEK CB-12 wireless doorbell system, showing two black plug-in receivers and one black push-button transmitter. All units have a green LED indicator and a bell icon.

Transmitter (Push Button) Features:

• IP55 Dustproof and Waterproof rating.
• Operating temperature: -4 °F to 140 °F (-20 °C to 60 °C).
• Ultra-low power consumption with a 3-year maximum battery lifespan.

Особливості ресивера:

• Плагін дизайн.
• 52 мелодій на вибір.
• 5 adjustable volume levels (up to 115 dB).
• LED flash indicator.
• Memory function for last melody and volume setting.

Налаштування та встановлення

1. Transmitter Installation:

Choose a suitable location for the transmitter, such as near your front door. Ensure the surface is clean and dry.

Image: A diagram illustrating two methods for installing the doorbell transmitter: using double-sided adhesive tape or using screws and anchors. The adhesive method shows applying the tape to the back of the transmitter and pressing it onto a surface. The screw method shows opening the transmitter, marking drill points, drilling, inserting anchors, and screwing the back plate to the wall before reattaching the front.

1. Method A: Using Adhesive Tape
   • Ретельно очистіть місце встановлення.
   • Peel off one side of the adhesive tape and attach it to the back of the transmitter.
   • Peel off the other side of the tape and firmly press the transmitter onto the desired surface for at least 30 seconds.
2. Method B: Using Screws and Anchors
   • Open the transmitter casing using the provided screwdriver.
   • Mark the positions for drilling holes on the wall using the back plate as a template.
   • Просвердліть два отвори та вставте анкери.
   • Secure the back plate to the wall with the screws.
   • Reattach the front part of the transmitter to the secured back plate.

2. Встановлення приймача:

Plug the receivers into standard electrical outlets in locations where you want to hear the doorbell chime. The 1000 ft (300 m) wireless range allows for flexible placement throughout your home.

Image: An illustration depicting a house with a doorbell transmitter outside and a receiver plugged into an indoor wall outlet, demonstrating the 1000 ft (300 m) wireless range of the system.

Інструкція з експлуатації

1. Pairing the Transmitter and Receiver:

The transmitter and receivers are pre-paired at the factory. If re-pairing is needed or if you add new components:

1. Підключіть приймач до розетки.
2. Press and hold the volume button on the receiver for 5 seconds until the LED indicator flashes rapidly. This indicates pairing mode.
3. Immediately press the transmitter (push button). The receiver will chime and the LED will flash slowly, indicating successful pairing.
4. If pairing multiple transmitters, repeat the process for each one.

2. Changing Melodies:

The receiver offers 52 different melodies.

Image: A close-up of the AVANTEK doorbell receiver plugged into a wall outlet, with icons indicating 52 chimes and tunes, 5 volume levels, and an LED indicator. This image visually represents the customization options for the chime.

• Press the "Next" or "Previous" button on the side of the receiver to cycle through the available melodies.
• Once you hear a melody you like, stop pressing the buttons. The receiver will remember this selection.

3. Регулювання гучності:

There are 5 adjustable volume levels, from silent (0 dB) to a maximum of 115 dB.

Image: A visual representation of the doorbell receiver's mute mode, showing a sleeping baby next to the receiver, emphasizing silent operation.

• Press the "Volume" button on the side of the receiver to cycle through the 5 volume levels.
• The lowest setting is mute (0 dB), indicated by a mute icon.

4. Функція пам'яті:

The receiver retains your last selected melody and volume level even after a power outagе., що усуває необхідність повторної конфігурації.

Технічне обслуговування

1. Battery Replacement (Transmitter):

The transmitter uses a CR2 battery with an estimated lifespan of 3 years. When the LED indicator on the transmitter no longer lights up or the range decreases significantly, it's time to replace the battery.

• Open the transmitter casing using the provided screwdriver.
• Обережно вийміть стару батарейку CR2.
• Вставте нову батарею CR2, дотримуючись правильної полярності.
• Закрийте casinнадійно.

2. Прибирання:

Протріть блоки дверних дзвінків м’якою сухою тканиною. Не використовуйте абразивні засоби для чищення або розчинники.

Усунення несправностей

Технічні характеристики

• модель: LD-CB-12-A
• Бездротовий діапазон: До 300 м (1000 футів) на відкритому повітрі
• Мелодії: 52 вибраних дзвінків
• Рівні гучності: 5 (0 dB to 115 dB)
• Акумулятор передавача: 1 x CR2 (included), 3-year lifespan
• Рейтинг водонепроникності передавача: IP55
• Робоча температура: Від -4 °F до 140 °F (від -20 °C до 60 °C)
• Джерело живлення: AC & батарея
• матеріал: ABS
• Розміри (передавач): 2.8 x 0.6 x 3.1 дюймів
• Розміри (ствольна коробка): 2.87 x 0.6 x 3.15 inches (approximate, based on visual data)
• томtage: 3 Volts (Transmitter)

Гарантія та підтримка

AVANTEK provides customer service for its products. For support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official AVANTEK webсайт.

This product is approved by FCC, CE, and RoHS standards.