Інструкція з експлуатації бездротового 3D-принтера XYZprinting da Vinci Mini

вступ

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your XYZprinting da Vinci Mini Wireless 3D Printer. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

малюнок 1: Фронт view of the XYZprinting da Vinci Mini Wireless 3D Printer, showcasing its compact design and a red vase being printed on the build plate.

Налаштування

1. Розпакування та первинний огляд

Carefully remove all components from the packaging. Verify that all items listed in the "What's in the Box" section are present and undamaged. The printer comes pre-assembled, requiring minimal setup.

малюнок 2: Diagram illustrating the contents included with the XYZprinting da Vinci Mini Wireless 3D Printer, such as bundled filament, cleaning tools, bed tape, and power accessories.

2. Підключення живлення

Connect the power cord to the printer and then to a power outlet. Ensure the power switch is in the OFF position before connecting. Turn the printer ON after all connections are secure.

3. Завантаження нитки

The da Vinci Mini Wireless 3D Printer features an auto-loading filament system. Insert the filament into the designated slot. The printer will automatically detect and load the filament. Примітка: Use only XYZprinting 600G filament for optimal performance and compatibility.

4. Встановлення програмного забезпечення та підключення

Install the XYZprint software on your computer. The printer supports wireless connectivity, allowing you to send print jobs remotely. Follow the on-screen instructions within the software to connect your printer to your Wi-Fi network.

Інструкція з експлуатації

1. Preparing a 3D Model

Use the XYZprint software to load or create your 3D models. The software allows for basic adjustments such as sizing. You can also access a library of free models online.

2. Налаштування друку

Before printing, configure the print settings in the XYZprint software. Key settings include:

• матеріал: Select the type of filament being used (e.g., PLA, Tough PLA, PETG).
• Температура сопла: Suggested setting for PLA/Tough PLA/PETG is 245°C. The nozzle heats up in approximately 1 minute.
• Роздільна здатність друку: The printer offers a consistent 200 micron printing resolution.

малюнок 3: Image displaying the various filament types compatible with the da Vinci Mini Wireless 3D Printer, including PLA, Tough PLA, PETG, Carbon PLA, and Metallic PLA (some requiring a selected extruder).

3. Початок друку

Once your model is prepared and settings are configured, initiate the print from the XYZprint software. The printer features auto-calibration for the print bed, ensuring proper leveling before printing begins.

малюнок 4: сторона view of the da Vinci Mini Wireless 3D Printer with its dimensions indicated: 13.19 inches deep, 15.36 inches wide, and 14.18 inches high.

The printer offers a build volume of 5.9" x 5.9" x 5.9".

малюнок 5: A visual representation of the printer's build volume, showing a printed airplane model within the 5.9 x 5.9 x 5.9 inch printing area.

Технічне обслуговування

1. Очищення платформи для друку

Regularly clean the print bed to ensure optimal adhesion for new prints. Use a soft cloth and isopropyl alcohol to wipe down the surface. Replace bed tape as needed.

2. Extruder Maintenance

The quick-release extruder allows for easy removal and cleaning. Use the provided cleaning brush and feeding path cleaning wire to clear any filament residue or clogs. Refer to the included quick guide for detailed instructions on extruder removal and cleaning.

3. Зберігання нитки

Store filament in a cool, dry place to prevent moisture absorption, which can affect print quality. Ensure the filament is properly sealed when not in use.

Усунення несправностей

Поширені проблеми та рішення:

• Нитка не екструдується: Check for clogs in the extruder. Clean the nozzle and feeding path. Ensure filament is loaded correctly.
• Погана адгезія друку: Clean the print bed. Apply new bed tape if necessary. Verify print bed leveling (auto-calibration should handle this, but manual check may be needed if issues persist).
• Print Quality Issues (e.g., stringing, layer shifting): Adjust print settings in the software, such as temperature, print speed, and retraction settings. Ensure filament is dry and properly stored.
• "Cartridge cannot be recognized" Error: This error indicates an issue with the filament cartridge's recognition. Ensure you are using genuine XYZprinting filament. If the issue persists, contact customer support.

For further assistance, refer to the XYZprint software's help section or contact XYZprinting customer service.

Технічні характеристики

Гарантія та підтримка

XYZprinting provides customer service for product inquiries and support. For any questions or concerns regarding your da Vinci Mini Wireless 3D Printer, please contact their phone support team. Refer to the included warranty card for specific warranty terms and conditions.

Важлива примітка: Use of non-genuine XYZprinting filament may void your warranty and affect print quality.