1. Продукт закінчивсяview
The Danfoss 193B2148 Electrothermal Head ABN-FBH 24 NC is designed for demand-based temperature control systems, particularly those requiring a high IP class. This electrothermal head is compatible with most manifolds available on the market, facilitated by its adaptable design. It features a quick snap-on installation mechanism and a clear, highly visible position indicator for operational status.
Ключові характеристики:
- Designed for demand-based starting temperature systems requiring high IP class.
- Broad compatibility with various manifolds through multiple adapters.
- Facilitates very quick snap-on installation.
- Equipped with a highly visible position indicator.
- Operates at 24 V.
- Requires the 193B2005 adapter for RA connection.
малюнок 1: The Danfoss 193B2148 Electrothermal Head. This image shows the compact, white unit with the Danfoss logo visible on its side, indicating its brand and design.
2. Інформація про безпеку
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Installation must be performed by a qualified professional in accordance with local electrical and plumbing codes.
- Перед будь-якими роботами з встановлення, технічного обслуговування або ремонту переконайтеся, що живлення відключено.
- The device operates at 24 V. Verify compatibility with your system's voltage.
- Do not expose the electrothermal head to extreme temperatures or direct moisture beyond its specified IP class.
- Do not attempt to disassemble or modify the unit. There are no user-serviceable parts inside.
3. Вміст упаковки
Перед розпакуванням переконайтеся, що всі компоненти є в наявності та не пошкоджені.
- 1 x Danfoss 193B2148 Electrothermal Head ABN-FBH 24 NC
- Інструкція з експлуатації (цей документ)
Примітка: The 193B2005 adapter for RA connection is sold separately and is required for specific installations.
4. Технічні характеристики
| Специфікація | Значення |
|---|---|
| Виробник | Danfoss |
| Номер деталі | 193B2148 |
| Номер моделі товару | 193B2148 |
| томtage | 24 В |
| Колір | Білий |
| Вага товару | 3.52 унцій (100 грам) |
| Розміри продукту | 3.54 x 2.95 x 2.09 дюйми (9 x 7.5 x 5.3 см) |
| Система вимірювання | Метрика |
| Включені компоненти | 1 Motor (Electrothermal Head) |
| Потрібні батареї | немає |
5. Налаштування та встановлення
The Danfoss 193B2148 Electrothermal Head is designed for straightforward installation. Ensure all safety precautions are followed before proceeding.
- Prepare the Manifold: Ensure the manifold connection point is clean and free from debris. If an RA connection is used, ensure the 193B2005 adapter is correctly installed on the manifold valve.
- Розташування голови: Align the electrothermal head with the manifold valve or the RA adapter. The design allows for a quick snap-on attachment.
- Монтаж за допомогою замикання: Gently push the electrothermal head onto the valve/adapter until it clicks securely into place. Verify that it is firmly attached and does not wobble.
- Електричне підключення: Connect the 24 V power supply wires to the electrothermal head terminals as per the wiring diagram provided with your heating system or manifold. Ensure correct polarity if specified.
- Перевірка системи: Once installed, restore power to the system and observe the position indicator.
For detailed wiring instructions, refer to your heating system's main control unit manual.
6. Інструкція з експлуатації
The electrothermal head operates automatically in conjunction with your heating control system (e.g., thermostat or zone controller) to regulate the flow of heating medium based on demand.
- Demand-Based Operation: When the control system signals a need for heat in a specific zone, the electrothermal head will open the valve, allowing hot water to circulate. When the demand is met, the head will close the valve.
- Position Indicator: The unit features a highly visible position indicator.
- Indicator Extended: The valve is closed (no heat flow).
- Indicator Retracted: The valve is open (heat flow).
- Початковий запуск: Upon initial power-up, the head may take a few minutes to fully open or close as it responds to the control signal. This is normal operation.
No direct user interaction is typically required with the electrothermal head itself once installed and configured with the heating system.
7. Технічне обслуговування
The Danfoss 193B2148 Electrothermal Head is designed for maintenance-free operation. However, periodic checks can help ensure optimal performance.
- Візуальний огляд: Periodically check the unit for any signs of physical damage or leaks around the valve connection.
- Чистота: Keep the exterior of the head clean and free from dust or debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Перевірка працездатності: Observe the position indicator during system operation to confirm it is moving correctly in response to heating demands.
No internal lubrication or servicing is required.
8. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Head does not open/close | No power supply; Faulty wiring; Control system issue; Head malfunction. |
|
| Position indicator not moving | No control signal; Head stuck; Mechanical obstruction. |
|
| Витік у точці з'єднання | Improper installation; Damaged valve or adapter. |
|
If troubleshooting steps do not resolve the issue, contact Danfoss customer support or a qualified service technician.
9. Гарантія та підтримка
Danfoss products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Danfoss webсайт або гарантійну документацію, що додається до вашої покупки.
For technical support, spare parts, or further assistance, please visit the official Danfoss website or contact their customer service department. When contacting support, please have your product model number (193B2148) and purchase information readily available.
Офіційний представник Danfoss Webсайт: www.danfoss.com
