Набір викруток Tolsen 6-в-1, інструкція з експлуатації

Продукт закінченийview

The Tolsen 6-in-1 Screwdriver Set is a versatile tool designed for various fastening tasks. It features a comfortable, interchangeable handle and a selection of high-quality Chrome-Vanadium (CRV) steel bits, offering multiple screwdriver types in a compact design.

Image: The Tolsen 6-in-1 Screwdriver Set, showing the ergonomic black and yellow handle, the chrome-plated bit holder, and two double-sided screwdriver bits (Phillips and Slotted) ready for use.

Компоненти:

• 1x Interchangeable Handle: Ергономічний дизайн для зручного захоплення.
• 1x Double-sided Hexagonal Bit Holder: Compatible with 6 mm and 8 mm bits.
• 1x Double-sided CRV Bit (6.35 x 65 mm): Features PH1 Phillips head and SL5 Slotted head.
• 1x Double-sided CRV Bit (8.00 x 75 mm): Features PH2 Phillips head and SL6 Slotted head.

Налаштування

Setting up your Tolsen 6-in-1 Screwdriver Set is quick and easy. Follow these steps to prepare your tool for use:

1. Select the Required Bit: Identify the appropriate screwdriver head (Phillips or Slotted) and size (PH1/SL5 or PH2/SL6) for your task.
2. Insert Bit into Holder: Take the selected double-sided CRV bit and insert one end into the hexagonal opening of the bit holder. Ensure it is fully seated and secure.
3. Attach Holder to Handle: Insert the other end of the bit holder into the hexagonal receptacle at the tip of the main handle. Push firmly until it clicks into place, ensuring a secure connection.
4. Перевірте підключення: Gently pull on the bit holder to confirm it is securely attached to the handle and the bit is firmly in the holder before beginning your work.

Інструкція з експлуатації

Once assembled, the Tolsen 6-in-1 Screwdriver Set operates like a standard screwdriver. Always ensure you use the correct bit size and type for the fastener to prevent damage to the fastener head or the bit.

• Закріплення кріплення: Place the tip of the selected screwdriver bit into the head of the screw. Ensure the bit is fully engaged and sits snugly in the screw head.
• Застосуйте тиск: Apply firm, steady downward pressure on the handle to keep the bit engaged with the screw. This prevents cam-out (the bit slipping out of the screw head).
• Поверніть ручку: Rotate the handle clockwise to tighten a screw or counter-clockwise to loosen a screw. Maintain consistent pressure and a steady turning motion.
• Зміна бітів: To change bits, pull the bit holder firmly out of the handle. Then, pull the current bit out of the holder and insert the desired new bit. Reattach the holder to the handle.

Примітка з безпеки: Always wear appropriate personal protective equipment, such as safety glasses, when using hand tools. Do not use the screwdriver as a pry bar or chisel. Do not strike the handle with a hammer or other object.

Технічне обслуговування

Proper maintenance will extend the life and performance of your Tolsen 6-in-1 Screwdriver Set.

• Прибирання: After each use, wipe down the handle and bits with a clean, dry cloth to remove dirt, grease, or debris. For stubborn grime, a slightly damp можна використовувати тканину, після чого ретельно висушити.
• Зберігання: Store the screwdriver set in a dry place, away from moisture and extreme temperatures, to prevent rust and material degradation. Keep all components together to avoid loss.
• Огляд: Periodically inspect the bits for signs of wear, such as rounded edges or chipped tips. Worn bits can damage fasteners and should be replaced. Check the handle and bit holder for any cracks or damage.
• Змащення (необов'язково): A light coat of rust-preventative oil can be applied to the metal bits if storing in a humid environment, but ensure to wipe off excess before use.

Усунення несправностей

Ось деякі поширені проблеми та способи їх вирішення.

• Bit Slipping from Screw Head (Cam-out):
  • Переконайтеся, що ви використовуєте правильний тип і розмір біти для гвинта.
  • Apply more downward pressure on the handle while turning.
  • Check if the bit tip is worn; replace if necessary.
• Bit Not Staying in Holder:
  • Ensure the bit is fully inserted into the hexagonal opening of the holder.
  • Check the bit holder for damage or debris that might prevent proper seating.
• Bit Holder Not Staying in Handle:
  • Ensure the bit holder is fully inserted into the handle's receptacle until it clicks.
  • Inspect the handle's receptacle and the bit holder's end for damage or obstructions.

Технічні характеристики

Гарантія та підтримка

Tolsen Tools are designed for professional quality and durability. For specific warranty information or technical support regarding your Tolsen 6-in-1 Screwdriver Set (Model: Tolsen20043), please refer to the warranty card included with your purchase or visit the official Tolsen Tools webсайт.

You may also contact your retailer for assistance. Please have your model number (Tolsen20043) and purchase date available when seeking support.

Note: Availability of spare parts information is not provided by the manufacturer at this time.