вступ
This manual provides essential information for the safe and proper assembly, use, and maintenance of your Graco Benton 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. This product is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed with headboard.

Image: The Graco Benton 4-in-1 Convertible Crib and Changer in black, showcasing its crib and attached changing table configuration.
Інформація про безпеку
Your child's safety is paramount. Always follow these guidelines:
- Прочитайте всі інструкції: Ensure you understand all assembly and usage instructions before using the product.
- Регулярна перевірка: Періодично перевіряйте всі гвинти, болти та кріплення, щоб переконатися, що вони затягнуті та надійно закріплені. Не використовуйте ліжечко, якщо будь-які деталі відсутні, пошкоджені або зламані.
- Mattress Safety: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
- Child Height Limit: Discontinue use of the crib when your child begins to climb out or reaches 35 inches (89 cm) in height.
- Changing Table Safety: Always use the safety strap provided with the changing pad. Never leave a child unattended on the changing table.
- Небезпека задухи: Keep small parts, plastic bags, and packaging materials away from children.
- Сертифікати: This product is GREENGUARD Gold Certified, screened for over 10,000 chemicals and VOCs, and JPMA Certified, meeting or exceeding all applicable safety standards.

Image: The Graco Benton Crib and Changer with a GREENGUARD Gold Certified badge, indicating low chemical emissions.
Список компонентів
Before assembly, ensure all components are present. Refer to the detailed parts list in your product packaging for specific hardware. Key components include:
- Crib side rails (front, back, left, right)
- Crib mattress support base
- Changing table frame
- Changing pad with safety strap
- Drawer components (3 drawers)
- Shelf components (2 open shelves)
- Hardware pack (screws, bolts, barrel nuts, Allen wrench)

Image: A diagram illustrating the key features of the crib and changer, including the adjustable mattress support, attached changing table, drawers, and shelves.
Налаштування
Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. A general overview of the setup process is as follows:
- Розпакуйте компоненти: Обережно вийміть усі деталі з упаковки та перевірте їх за списком компонентів.
- Assemble Crib Frame: Прикріпіть бічні поручні до узголів'я та зніжжя ліжка за допомогою наданих кріплень.
- Встановлення опори для матраца: Secure the mattress support base at the desired height. There are three adjustable height options.
- Assemble Changing Table: Construct the changing table frame, including the drawers and open shelves.
- Attach Changing Table: Securely attach the assembled changing table to the crib frame.
- Install Changing Pad: Place the water-resistant changing pad on the changing table and secure it with the safety strap.
For detailed visual instructions, please refer to the assembly diagrams in your product's dedicated assembly manual.
Інструкція з експлуатації
Crib Use
Place your child in the crib on their back. Ensure the mattress is firm and fits snugly. Adjust the mattress support base to the appropriate height for your child's developmental stage. The highest position is for infants, and lower positions are for older babies who can sit or stand.
Використання пеленального столика
Always use the changing pad with the safety strap. Place your child on the changing pad and secure the safety strap around them. Keep all necessary changing supplies within reach but away from the child. Never leave your child unattended on the changing table.

Image: A close-up of the attached changing table, showing the water-resistant changing pad and the integrated safety strap.
Перетворення
The Graco Benton 4-in-1 Crib and Changer converts to a toddler bed, daybed, and full-size bed. Conversion kits and mattresses are sold separately.
- Ліжечко для малюків: Remove the front crib rail and install the Graco Toddler Guardrail (sold separately).
- Кушетка: Remove the front crib rail. No guardrail is used for the daybed configuration.
- Повнорозмірне ліжко: Remove all crib rails and the changing table. Attach the headboard to a Graco Full-Size Conversion Kit (sold separately) and a standard full-size mattress.

Image: A visual representation of the four conversion stages: crib, toddler bed, daybed, and full-size bed with headboard.
Технічне обслуговування
To maintain the quality and safety of your Graco Benton Crib and Changer:
- Прибирання: Протріть поверхні рекламоюamp тканиною. Уникайте абразивних засобів для чищення або сильних хімічних речовин, які можуть пошкодити покриття або матеріали.
- Зберігання: If storing the product, do so in a dry, temperature-controlled environment to prevent warping or damage.
- Обладнання: Periodically check all hardware for tightness. Loose hardware can lead to instability and safety hazards.
Усунення несправностей
If you encounter issues with your Graco Benton Crib and Changer, consider the following:
- Хитка структура: Переконайтеся, що всі болти та гвинти повністю затягнуті. Ще раз перевірте кроки складання, щоб підтвердити правильність розташування деталей.
- Шухляди не ковзають плавно: Verify that the Euro drawer glides are correctly installed and free from obstructions. Ensure drawers are not overloaded.
- Складність з конверсіями: Refer to the specific conversion instructions provided with the optional conversion kits. Ensure all necessary parts are acquired.
- Відсутні частини: If any parts are missing upon unboxing, contact customer support immediately. Do not attempt to substitute parts.
Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | 04586-64B |
| Колір | чорний |
| Розміри продукту (Д x Ш x В) | 73.2 см x 29.8 см x 41.7 см |
| Вага товару | 98 фунта |
| матеріал | Соснова деревина, інженерна деревина та деревні композити |
| Maximum Child Height (Crib Stage) | 35 дюйма (89 см) |
| Maximum Weight (Toddler/Daybed) | 50 фунта |
| Сертифікати | Сертифіковано GREENGUARD Gold, сертифіковано JPMA |
| UPC | 081877503177 |

Image: A diagram illustrating the overall dimensions of the Graco Benton Crib and Changer.
Офіційне відео продукту
Video: An official video from Storkcraft, the manufacturer of Graco products, highlighting the brand's commitment to supporting parents and providing safe, reliable baby products. This video showcases various Graco products and the design philosophy behind them.
Гарантія та підтримка
Ліжечко-пеленалка Graco Benton 4-в-1, що трансформується, має... 1 рік обмеженої гарантії від виробничих дефектів. Будь ласка, збережіть чек про покупку для гарантійних претензій.
For customer support, missing parts, or further assistance, please contact Storkcraft Customer Service:
- Webсайт: Відвідайте Storkcraft Brand Store для отримання контактної інформації та поширених запитань.
- телефон: Refer to the contact details provided in your product packaging or on the official Storkcraft webсайт.
When contacting support, please have your model number (04586-64B) and date of purchase readily available.




