1. Вступ та опис продуктуview
This manual provides essential information for the safe assembly, operation, and maintenance of your Yaheetech Horizontal Barbell Bumper Plate Rack Holder. This rack is designed to organize and store Olympic-sized barbell bumper plates and Olympic bars, featuring a mobile design with wheels and a handle for convenient relocation.
Зображення 1: Загальний вигляд view of the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.
Ключові характеристики:
- Розмір: 37 x 13 x 11 inches (LxWxH).
- Макс. Ємність: 300 Lb (136 kg).
- матеріал: Powder-coated steel frame for resistance to sweat, moisture, and rust.
- Plate Slots: Includes 4 slots, each approximately 5.5 inches wide, to accommodate various bumper plate sizes.
- мобільність: Equipped with two 2.6-inch diameter rolling wheels and a sweat-resistant handle for easy movement.
- Bar Holders: Two vertical holders for Olympic bars.
2. Інформація про безпеку
Please read and understand all safety instructions before assembling or using the product. Failure to follow these instructions may result in injury or damage to the product.
- Обмеження ваги: Do not exceed the maximum weight capacity of 300 Lb (136 kg). Overloading can cause structural failure and injury.
- Збірка: Ensure all bolts, nuts, and components are securely tightened before use. Periodically check for tightness.
- Стабільна поверхня: Always place the rack on a flat, stable, and level surface to prevent tipping.
- Діти та домашні тварини: Тримайте дітей та домашніх тварин подалі від стійки під час складання та використання.
- Переміщення стійки: When moving the rack, ensure plates and bars are securely seated. Use the handle and wheels for controlled movement. Avoid sudden stops or turns when heavily loaded.
- Огляд: Before each use, inspect the rack for any signs of damage, loose parts, or wear. Do not use if damaged.
- Правильне завантаження: Distribute weight evenly across the plate slots to maintain balance and stability.
3. Вміст упаковки
Перед початком складання перевірте наявність усіх компонентів. Якщо якісь деталі відсутні або пошкоджені, зверніться до служби підтримки клієнтів.
- Основна рама (1)
- Plate Dividers (4)
- Vertical Bar Holders (2)
- Ручка в зборі (1)
- Колеса (2)
- Hardware Pack (Bolts, Washers, Nuts, Wrenches)
4. Інструкція зі складання
Follow these steps carefully to assemble your barbell bumper plate rack.
- Розпакуйте компоненти: Обережно вийміть усі деталі з упаковки та розкладіть їх на чистій рівній поверхні. Перевірте вміст упаковки.
- Прикріпіть колеса: Secure the two wheels to the designated points on one end of the main frame using the provided bolts and wrenches. Ensure they are firmly attached and can rotate freely.
- Ручка встановлення: Attach the handle assembly to the opposite end of the main frame. Align the holes and secure with the appropriate bolts, washers, and nuts. Tighten securely.
- Insert Plate Dividers: Slide the four plate dividers into their respective slots on the main frame. These should fit snugly to create the plate storage sections.
- Mount Bar Holders: Attach the two vertical bar holders to the main frame, typically near the wheeled end. Secure them with the provided hardware.
- Остаточна перевірка: Once all components are assembled, double-check all bolts and nuts to ensure they are fully tightened. Gently rock the rack to confirm stability.
Зображення 2: Крупний план view of the rack's handle, designed for comfortable grip during movement.
Image 3: Detail of the vertical Olympic bar holders and one of the rolling wheels.
5. Інструкція з експлуатації
This section details how to properly load and move your Yaheetech Barbell Bumper Plate Rack.
- Loading Plates: Carefully place bumper plates into the designated slots. It is recommended to load heavier plates towards the center or bottom of the rack for better stability. Distribute weight as evenly as possible across the four slots.
- Storing Bars: Insert Olympic barbells vertically into the two bar holders. Ensure the bars are fully seated and stable.
- Переміщення стійки: To move the rack, grasp the handle firmly. Tilt the rack slightly to engage the wheels, lifting the non-wheeled end off the ground. Roll the rack to your desired location. Avoid dragging the rack without using the wheels.
- Розміщення: Always position the rack on a flat, stable surface away from high-traffic areas to prevent accidental tipping.
Image 4: The rack fully loaded with bumper plates and barbells, showcasing його місткість для зберігання.
Image 5: A closer look at bumper plates neatly organized within the rack's slots.
6. Технічне обслуговування
Regular maintenance ensures the longevity and safe operation of your plate rack.
- Прибирання: Протріть сталевий каркас рекламоюamp cloth to remove dust and sweat. Avoid abrasive cleaners that could damage the powder coating.
- Перевірка обладнання: Periodically (e.g., monthly) inspect all bolts, nuts, and connections. Tighten any loose hardware to maintain structural integrity.
- Перевірка коліс: Check the wheels for any debris or damage that might impede smooth rolling. Clean as necessary.
- Запобігання іржі: The powder-coated steel is resistant to rust, but prolonged exposure to high humidity or moisture should be avoided. If scratches occur, touch up with rust-inhibiting paint.
7. Вирішення проблем
This section addresses common issues you might encounter with your plate rack.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Стійка відчувається нестабільною або хиткою | Loose hardware; uneven weight distribution; uneven floor surface. | Tighten all bolts and nuts. Redistribute plates evenly. Move rack to a level surface. |
| Колеса не котяться плавно | Debris in wheel mechanism; damaged wheel. | Clean wheels and axles. Inspect for damage; replace if necessary. |
| Difficulty moving the rack when loaded | Overloaded; wheels not fully engaged; rough surface. | Reduce weight if exceeding capacity. Ensure rack is tilted to engage wheels. Move on a smoother surface. |
8. Технічні характеристики
Detailed technical specifications for the Yaheetech Horizontal Barbell Bumper Plate Rack Holder.
Image 6: Dimensional diagram of the plate rack, illustrating key measurements.
| Специфікація | Деталь |
|---|---|
| Номер моделі | YT-00073058 |
| Бренд | Yaheetech |
| Розміри продукту (ДxШxВ) | 37 x 13 x 11 дюйми (93.98 x 33.02 x 29.97 см) |
| Вага товару | 7.7 кг (приблизно 17 фунтів) |
| Максимальна вага | 300 фунта (136 кг) |
| матеріал | Powder-coated Steel Frame, Plastic Iron Alloy Steel |
| Number of Plate Racks | 4 |
| Діаметр колеса | 2.6 дюймів |
| Колір | чорний |
9. Гарантія та підтримка
Yaheetech products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech webсайт.
If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact Yaheetech customer support through the retailer where the product was purchased or via the contact information provided on the official Yaheetech webсайт.
- Інтернет-підтримка: Відвідайте www.yaheetech.shop (or your regional Yaheetech website) for FAQs and contact options.
- Обслуговування клієнтів: Refer to your purchase receipt or product packaging for direct customer service contact details.
