Mackie MDB-USB Signal Direct Box Instruction Manual

1. Вступ і даліview

The Mackie MDB-USB is a bus-powered stereo direct box designed to seamlessly integrate computer audio into analog sound systems. It functions as a high-resolution audio interface, converting digital audio signals into clean, balanced stereo output, free from noise and distortion. This device eliminates the need to rely on a computer's headphone jack for professional audio connections, offering enhanced versatility with features like output level control, a dedicated headphone output, and a mono sum option. The analog outputs are dual XLR with a ground lift switch for optimal signal integrity. A USB cable is included for immediate connectivity.

• Direct USB Connectivity: Connect your computer directly via USB for audio transfer.
• Аудіо високої роздільної здатності: Supports 24-bit/96kHz audio for pristine sound quality.
• Збалансовані XLR-виходи: Provides professional-grade balanced XLR outputs with ground lift.
• На автобусі: Operates solely on power supplied by your computer's USB port.

2. Налаштування та підключення

Follow these steps to set up your MDB-USB Signal Direct Box:

1. Підключення до комп'ютера: Use the included USB cable to connect the MDB-USB to an available USB port on your computer. The device is bus-powered and does not require an external power supply.
2. Підключення аудіовиходу: Connect the dual XLR outputs (Left and Right) of the MDB-USB to the balanced inputs of your mixer, audio interface, or PA system using standard XLR cables.
3. Моніторинг навушників: For direct monitoring, connect your headphones to the dedicated headphone output jack on the MDB-USB.
4. Наземний підйомник: If you experience hum or ground loop noise, engage the Ground Lift switch located between the XLR outputs. This can help eliminate unwanted noise.
5. Конфігурація програмного забезпечення: On your computer, select the MDB-USB as the audio output device in your operating system's sound settings and your preferred audio software.

3. Інструкція з експлуатації

The MDB-USB offers straightforward controls for managing your audio signal:

• Контроль рівня: Adjust the output level of the MDB-USB using the dedicated knob. This controls the signal sent to your mixer or PA system.
• Гучність навушників: A separate volume control is provided for the headphone output, allowing independent monitoring level adjustment.
• Mono Sum Switch: Engage the Mono Sum switch to combine the left and right stereo signals into a single mono output. This is useful for systems that only support mono input or for checking mono compatibility.
• Перемикач підйому на землю: As mentioned in the setup, use this switch to break ground loops and eliminate hum. Toggle it to the position that provides the cleanest audio signal.

For a visual demonstration of the Mackie MDB series, including the MDB-USB, refer to the video below:

4. Технічне обслуговування

To ensure the longevity and optimal performance of your Mackie MDB-USB, follow these simple maintenance guidelines:

• Прибирання: Використовуйте м’яку суху тканину для протирання зовнішньої частини пристрою. Уникайте використання абразивних засобів для чищення, розчинників або воску, оскільки вони можуть пошкодити покриття та внутрішні компоненти.
• Зберігання: When not in use, store the MDB-USB in a cool, dry place, away from direct sunlight and extreme temperatures. Protect it from dust and moisture.
• Обробка: Handle the unit with care. While built robustly, dropping or subjecting it to strong impacts can cause damage.
• Управління кабелем: Ensure all cables connected to the MDB-USB are not excessively bent or strained, which can lead to cable failure or damage to the unit's ports.

5. Вирішення проблем

If you encounter issues with your MDB-USB, consult the following common troubleshooting tips:

• Немає аудіовиходу:
  • Ensure the MDB-USB is correctly connected to your computer via USB and recognized as an audio device.
  • Verify that the MDB-USB is selected as the output device in your computer's sound settings and your audio software.
  • Check all cable connections (USB, XLR, headphones) for secure fit.
  • Increase the output level on the MDB-USB and the input gain on your mixer/PA system.
• Hum or Buzzing Noise:
  • Engage the Ground Lift switch on the MDB-USB.
  • Ensure all audio equipment is connected to the same electrical outlet or power conditioner to avoid ground loops.
  • Test with different cables to rule out faulty wiring.
• Спотворений звук:
  • Reduce the output level on the MDB-USB or the input gain on your mixer/PA system to prevent clipping.
  • Check your computer's audio output level to ensure it's not too high.
• Навушники не працюють:
  • Ensure headphones are fully plugged into the headphone jack.
  • Adjust the headphone volume knob on the MDB-USB.
  • Test with another pair of headphones to confirm they are functional.

6. Технічні характеристики

7. Гарантія та підтримка

For warranty information, technical support, or service inquiries, please refer to the official Mackie webсайт або зверніться безпосередньо до служби підтримки клієнтів. Зберігайте чек про покупку як підтвердження покупки для гарантійних претензій.