Інструкція користувача п'ятиканального DJ-мікшера Numark C2 для кріплення в стійці

вступ

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Numark C2 Rack-Mountable Five-Channel DJ Mixer. The C2 is designed for professional DJ applications, offering robust performance and essential features for audio mixing.

Продукт закінченийview

The Numark C2 is a five-channel DJ mixer equipped with a five-band equalizer, a sophisticated microphone section with auto-ducking and auto-muting, and flexible cueing options. Its design prioritizes ease of use and reliable performance.

Ключові характеристики:

• Five independent input channels for versatile audio source management.
• Five-band equalizer (EQ) system, defeatable from the rear panel, for precise sound shaping.
• Microphone section with adjustable sensitivity, auto-ducking, and auto-muting capabilities.
• Divide or blend-cueing functionality for monitoring audio.
• Fader-start and sweep functions on the Master fader for dynamic control.

Front Panel Controls and Connections:

Figure 1: Numark C2 DJ Mixer Front Panel. На цьому зображенні зображено передню частину view of the Numark C2 mixer, highlighting the five channel strips, microphone inputs, master section with EQ and level meters, and crossfader. Each channel includes gain, EQ, and fader controls, along with cue send buttons. The microphone section features dedicated gain, treble, bass, talkover, and sensitivity controls. The master section provides overall output control, a five-band graphic equalizer, and headphone output with gain control.

The front panel provides access to all primary operational controls, including individual channel gain, EQ, and faders, microphone input controls, the master output section with a five-band graphic equalizer, and headphone monitoring controls. The crossfader allows for smooth transitions between channels.

Підключення на задній панелі:

Figure 2: Numark C2 DJ Mixer Rear Panel. This image shows the rear panel of the Numark C2 mixer, detailing the power input, master XLR and RCA outputs, booth and record RCA outputs, and multiple RCA inputs for each of the five channels (Line A, Line B, Phono). It also includes the microphone 2 input, ground terminal, and switches for EQ defeat and channel input selection.

The rear panel houses all input and output connections, including the AC power input, master XLR and RCA outputs, booth and record outputs, and various RCA inputs for each channel (Line A, Line B, Phono). It also features a second microphone input and switches for EQ defeat and input source selection.

Налаштування

1. Розпакування: Carefully remove the mixer from its packaging and inspect for any signs of damage. Retain all packaging materials for future transport or storage.
2. Підключення живлення: Connect the included power cable to the AC input on the rear panel of the C2 mixer and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
3. Монтаж в стійку: The Numark C2 is designed for standard 19-inch rack mounting. Secure the mixer using appropriate rack screws (not included) into a rack enclosure.
4. Аудіо входи:
   • Connect your audio sources (turntables, CD players, media players) to the corresponding RCA inputs on the rear panel. Each channel typically offers Line A, Line B, and Phono inputs.
   • Ensure turntables are connected to PHONO inputs and other devices to LINE inputs. Connect the ground wire from turntables to the mixer's ground terminal if applicable.
5. Мікрофонні входи: Connect microphones to the MIC 1 input on the front panel (XLR/1/4" combo) or MIC 2 input on the rear panel (1/4").
6. Аудіо виходи:
   • Головний вихід: Connect the MASTER XLR or RCA outputs to your main sound system or ampліфірник.
   • Вихід стенду: Connect the BOOTH RCA outputs to your monitor speakers.
   • Вихід запису: Connect the RECORD RCA outputs to a recording device.
7. Увімкнення: Once all connections are secure, switch the power button on the front panel to the ON position.

Інструкція з експлуатації

Basic Mixing:

1. Вибір входу: For each channel, use the input selector switch on the rear panel to choose between Line A, Line B, or Phono.
2. Регулювання посилення: Use the GAIN knob at the top of each channel strip to adjust the input level. Aim for the signal to be strong but not clipping (indicated by the channel's peak LED).
3. Канали фейдерів: Use the vertical faders for each channel to control the volume of that specific input.
4. Кросфейдер: The crossfader at the bottom of the mixer allows for smooth transitions between assigned channels. Use the ASSIGN switches above the crossfader to route channels to either side (A or B) of the crossfader.
5. Головний вихід: Adjust the MASTER fader to control the overall output volume of the mixer. Monitor the master level meters to prevent clipping.

Еквалайзер (EQ):

• The C2 features a five-band graphic equalizer in the master section. Use the sliders to boost or cut specific frequency ranges (e.g., 60Hz, 250Hz, 1KHz, 4KHz, 16KHz) to tailor the overall sound.
• The EQ can be defeated (bypassed) using a switch on the rear panel if a flat frequency response is desired.

Розділ мікрофона:

• посилення: Adjust the MIC GAIN knob for the microphone input.
• EQ: Use the TREBLE and BASS knobs to adjust the tone of the microphone signal.
• Обговорювати: Engage the TALKOVER function to automatically reduce the music volume when speaking into the microphone. Adjust the SENSITIVITY knob to set the threshold for this function.
• Auto-Muting: The microphone section includes an auto-muting feature with adjustable sensitivity to prevent feedback.

Cueing and Monitoring:

• Cue Send: Press the CUE SEND button on any channel to send its audio to the headphone output for pre-listening without affecting the main mix.
• Посилення навушників: Adjust the HEADPHONE GAIN knob to control the volume of your headphones.
• Режим сигналу: Use the CUE MODE control to blend between the cued channel(s) and the master output in your headphones.

Fader Start:

The C2 supports fader-start functionality. When connected to compatible CD players or media players, moving a channel fader or the crossfader can initiate playback. Refer to your media player's manual for compatibility and connection details.

Технічне обслуговування

• Прибирання: Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Захист від пилу: Тримайте мікшер закритим, коли він не використовується, щоб запобігти накопиченню пилу, який може вплинути на фейдери та ручки.
• Вентиляція: Забезпечте належну вентиляцію навколо пристрою, щоб запобігти перегріву. Не блокуйте вентиляційні отвори.
• Зберігання: Зберігайте міксер у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур.

Усунення несправностей

• Немає живлення:
  • Check that the power cable is securely connected to both the mixer and a working power outlet.
  • Переконайтеся, що вимикач живлення на міксері знаходиться в положенні ON (УВІМК.).
• Немає вихідного звуку:
  • Verify that all audio cables are correctly connected to the inputs and outputs.
  • Check the GAIN knobs for each channel and the MASTER fader are set to appropriate levels.
  • Ensure the input selector switches on the rear panel are set to the correct source.
  • Підтвердьте, що ваш amplifier or powered speakers are turned on and functioning correctly.
• Спотворений звук:
  • Reduce the GAIN levels for individual channels and the MASTER fader if the peak LEDs are consistently lit.
  • Check that PHONO inputs are used only for turntables and LINE inputs for other devices.
• Зворотній зв'язок мікрофона:
  • Reduce microphone GAIN.
  • Adjust the SENSITIVITY for the auto-muting feature.
  • Reposition the microphone to avoid pointing it directly at speakers.

Технічні характеристики

Примітка: Технічні характеристики можуть бути змінені без попередження.

Гарантія та підтримка

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Numark webсайт. Контактна інформація служби підтримки клієнтів зазвичай доступна на сайті виробника webсайт.

Ви також можете відвідати Numark Brand Store on Amazon для отримання додаткової інформації про продукт і ресурсів.