CYCPLUS U10

Інструкція користувача для адаптера-донгла CYCPLUS USB ANT+ U1

Модель: U10

1. Продукт закінчивсяview

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 is a wireless receiver designed to bridge the gap between traditional bike trainers and modern cycling software. It receives ANT+ wireless radio signals from various sensors and translates them into a USB protocol, enabling seamless integration with popular training applications. This device is essential for indoor cycling enthusiasts looking to enhance their virtual training experience.

CYCPLUS USB ANT+ Stick Dongle Adapter, front view

малюнок 1: Фронт view of the CYCPLUS USB ANT+ Stick Dongle Adapter. This compact device features a standard USB-A connector on one end and the ANT+ receiver module on the other, designed for easy plug-and-play functionality with computers.

2. Посібник із налаштування

Setting up your CYCPLUS USB ANT+ Stick Dongle Adapter is straightforward.

  1. Сумісність системи: Ensure your computer runs on a compatible operating system. The U1 dongle is designed for use with PC/Laptop running Windows or macOS. Please note: This device is not compatible with Android or iPhone mobile devices.
  2. Підключіть донгл: Insert the USB ANT+ stick into an available USB port on your desktop or laptop computer.
  3. Встановлення драйвера: In most cases, the required drivers will install automatically upon connecting the device to your computer. If automatic installation does not occur, or if you encounter any driver-related issues, please contact CYCPLUS customer service for assistance.
  4. Оптимальне розміщення: For best performance, position the dongle within 3 meters (approximately 10 feet) of your ANT+ sensors (e.g., bike trainer, heart rate monitor, speed/cadence sensors). The maximum effective range is 5 meters.
CYCPLUS USB ANT+ Stick Dongle Adapter, side view showing USB connector

малюнок 2: сторона view of the CYCPLUS USB ANT+ Stick Dongle Adapter, highlighting the USB connector. This view demonstrates its compact design, making it easy to plug into any standard USB port.

3. Інструкція з експлуатації

Once the ANT+ dongle is successfully set up, you can begin using it with your preferred cycling applications.

  • Сумісність програмного забезпечення: The CYCPLUS U1 dongle is compatible with popular indoor cycling software platforms, including Zwift, TheSufferfest, TrainerRoad, and Rouvy.
  • Sensor Data Collection: The dongle is designed to collect various sensor data via the ANT+ wireless protocol. This includes:
    • Cadence sensors
    • Датчики швидкості
    • Heart rate monitors
    • Лічильники електроенергії
    Ensure your sensors are ANT+ compatible and properly paired within your cycling application.
  • Channel Support: The dongle supports 8 ANT+ channels, allowing it to connect to multiple sensors simultaneously.
  • Using with Cycling Software:
    1. Launch your chosen cycling application (e.g., Zwift).
    2. Navigate to the device pairing or sensor connection section within the application.
    3. The application should detect the ANT+ dongle and then allow you to search for and connect to your ANT+ enabled sensors.
    4. Follow the on-screen prompts within the application to complete the pairing process for each sensor.

4. Технічне обслуговування

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 requires minimal maintenance to ensure its longevity and optimal performance.

  • Прибирання: Gently wipe the exterior of the dongle with a soft, dry cloth to remove dust or debris. Avoid using liquid cleaners or abrasive materials.
  • Зберігання: When not in use, store the dongle in a dry, cool place, away from direct sunlight and extreme temperatures. Protect the USB connector from damage.
  • Обробка: Handle the dongle with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.

5. Вирішення проблем

If you encounter issues with your CYCPLUS USB ANT+ Stick Dongle Adapter, refer to the following common troubleshooting steps:

проблемаМожлива причинаРішення
Dongle not recognized by computer.
  • Нещільне USB-з'єднання.
  • Драйвер не встановлено або пошкоджено.
  • Несправний порт USB.
  • Ensure the dongle is firmly inserted into the USB port.
  • Спробуйте інший порт USB на комп’ютері.
  • Check Device Manager (Windows) or System Information (macOS) for driver status. If needed, contact customer service for driver support.
  • Перезавантажте комп'ютер.
Sensors not connecting or frequently disconnecting.
  • Dongle too far from sensors.
  • Перешкоди від інших бездротових пристроїв.
  • Sensor battery low.
  • Incorrect sensor pairing in software.
  • Software-specific ANT+ protocol issues (e.g., Wahoo Kickr protocol vs. ANT FEC).
  • Move the dongle closer to your sensors (ideally within 3 meters).
  • Minimize other wireless devices (Wi-Fi routers, Bluetooth devices) near the dongle during use.
  • Replace batteries in your ANT+ sensors.
  • Ensure correct sensors are selected and paired within your cycling application.
  • If using a Wahoo trainer, try switching to ANT FEC protocol in your software settings if available.
Dongle not working with Android/iPhone.Несумісність.The CYCPLUS U1 dongle is designed for Windows and macOS computers only and is not compatible with Android or iPhone devices.

6. Технічні характеристики

ОсобливістьДеталь
БрендCYCPLUS
Номер моделіU10
КолірBlack (U1 Stick)
матеріалABS
Розміри (Д x Ш x В)18.5 мм x 14.5 мм x 6 мм (0.72 дюйма x 0.57 дюйма x 0.24 дюйма)
Вага товару1.7g (0.06oz) / 0.634 ounces (packaged)
Протокол бездротового зв'язку2.4Ghz ANT+ wireless communications protocol
Діапазон5 meters (Best performance within 3 meters)
Номер каналу8
Апаратний інтерфейсUSB
Протокол зв'язку данихUSB
Швидкість передачі даних3 мегабіт в секунду
Сумісні операційні системиWindows, macOS
Підтримуване програмне забезпеченняZwift, TheSufferfest, TrainerRoad, Rouvy

7. Гарантія та підтримка

CYCPLUS is committed to providing high-quality products and excellent customer service.

  • Гарантія: All CYCPLUS products, including the USB ANT+ Stick Dongle Adapter U1, come with a two-year warranty and full lifetime service.
  • Підтримка клієнтів: If you have any questions, require technical assistance, or encounter any issues not covered in this manual, please do not hesitate to contact CYCPLUS customer service. We are always ready to assist you.

Пов'язані документи - U10

попередньоview Інструкція з використання та технічні характеристики USB-адаптера Cycplus U10 ANT+
Вичерпний посібник користувача USB-адаптера Cycplus U10 ANT+, що охоплює його характеристики, цільове призначення, інструкції з безпеки, технічні характеристики, відповідність екологічним нормам та декларацію відповідності ЄС. Ідеально підходить для бездротового підключення велотренажерів та інших пристроїв.
попередньоview Посібник користувача CYCPLUS T3 Smart Bike Trainer
User manual for the CYCPLUS T3 Smart Bike Trainer, covering setup, installation, usage, and specifications. Learn how to connect your bike, understand working modes, and troubleshoot common issues.
попередньоview Посібник користувача CYCPLUS T3 Smart Bike Trainer
Comprehensive user manual for the CYCPLUS T3 Smart Bike Trainer, covering setup, installation, operation, and specifications. Learn how to connect your bike, use the CYCPLUS app, and troubleshoot common issues.
попередньоview Інструкція з використання розумного велотренажера CYCPLUS T2H
Comprehensive user manual for the CYCPLUS T2H Smart Bike Trainer, covering unboxing, installation, setup, working modes, application usage, troubleshooting, and specifications.
попередньоview Посібник користувача CYCPLUS T2 Smart Bike Trainer
Інструкція користувача для велотренажера CYCPLUS T2 Smart, що охоплює налаштування, встановлення, режими роботи, застосування та технічні характеристики.
попередньоview Інструкція з використання розумного велотренажера CYCPLUS R200
This user manual provides instructions for the CYCPLUS R200 Smart Bike Trainer, covering unboxing, installation, setup, and specifications. Learn how to connect your bike, use different modes, and troubleshoot common issues.