1. Вступ
The Clear Com CS-702 is a 2-channel portable headset main station designed for professional intercom systems. It serves as a central unit for communication, providing clear and reliable audio in various environments. This manual provides instructions for the proper setup, operation, and maintenance of your CS-702 unit.
The Clear-Com system is a closed-circuit intercom designed for high-clarity communication. A basic system comprises a power supply or main station, such as the CS-702, connected to various remote stations like beltpacks and loudspeaker stations. Clear-Com units are compatible with each other and can interface with other communication systems.
2. Ключові характеристики
- Supports up to 40 belt packs or 7 speaker stations on 2 channels.
- Automatic short-circuit protection and reset with LED indicators.
- Dual-action electronic momentary/latching "Talk" buttons.
- Channel A & B "Link" switch to operate as a one-channel system.
- Mic- or line-level program with selectable "Program Interrupt".
3. Елементи керування передньої панелі
Figure 1: Front Panel of the Clear Com CS-702 Main Station
The image above displays the front panel of the Clear Com CS-702, highlighting its various controls and connectors. These include the headset connector, channel volume controls, talk and call buttons for each channel, program input controls, and status indicators.
- Роз'єм для гарнітури: 4-pin XLR connector for connecting a headset.
- Announce Button: Activates the announce function (if configured in the system).
- Channel A / Channel B Volume: Rotary knobs to adjust the listen level for each channel.
- Talk Buttons (A & B): Electronic momentary/latching buttons to activate the microphone for communication on Channel A or B. Press briefly for momentary talk, press and hold for approximately one second to latch.
- Call Buttons (A & B): Buttons to send a call signal to all stations on Channel A or B.
- Pgm (Program) Switch: A three-position switch (Off, Intrpt) to control program audio.
- Pgm Feed Level: A small rotary control to adjust the level of the program audio feed.
- Party Line Link: Button to link Channel A and Channel B, allowing them to operate as a single channel.
- Sidetone A / Sidetone B: Small rotary controls to adjust the sidetone level for each channel, allowing the operator to hear their own voice in the headset.
- Remote Mic Kill: Button to remotely disable microphones on connected stations (if supported).
- Обсяг програми: Rotary knob to adjust the overall volume of the program audio.
- Ch. A / Ch. B Indicators: LEDs that illuminate to indicate activity or call signals on Channel A or B.
- D.C. Short Indicator: LED that illuminates to indicate a direct current short circuit on the intercom line.
- Роз'єм для навушників: 3.5mm jack for connecting an external earphone or speaker for monitoring.
4. Налаштування
- Підключення живлення: Connect the CS-702 to a suitable power source using the provided power cable.
- Intercom Line Connection: Connect the CS-702 to your Clear-Com intercom system using standard intercom cabling. Ensure proper polarity and secure connections.
- Remote Station Connection: Connect beltpacks, speaker stations, or other remote units to the CS-702's intercom lines. The CS-702 supports up to 40 beltpacks or 7 speaker stations across its two channels.
- Підключення гарнітури: Plug your headset into the 4-pin XLR Headset connector on the front panel.
- Program Input (Optional): If using program audio, connect your audio source to the program input on the rear panel (refer to the full product diagram for exact location).
5. Інструкція з експлуатації
5.1. Monitoring Intercom Activity
Відрегулюйте Channel A Volume і Channel B Volume knobs to set the desired listening level for each channel through your headset or external earphone. The station can monitor activity on one or both channels simultaneously.
5.2. Talking on Channels
To speak on a channel, press the corresponding говорити button (Channel A or Channel B). The CS-702 features a microphone preamplifier with a limiter and speech-shaping circuits for clear audio transmission.
- Momentary Talk: Press and release the Talk button quickly to speak momentarily.
- Latching Talk: Press and hold the Talk button for approximately one second until it latches. The button will illuminate dimly to indicate it is latched. Press again to unlatch.
5.3. Signaling Other Stations
To send a call signal to all stations on a specific channel, press the corresponding Телефонуйте button (Channel A or Channel B). When a remote station sends a call signal, the CS-702's associated Talk button will illuminate brightly, attracting the operator's attention.
5.4. Program Audio Integration
If program audio is connected, use the Обсяг програми knob to adjust its overall level. The Pgm switch allows you to control how program audio interacts with intercom communication:
- Вимкнено: Program audio is disabled.
- Intrpt (Interrupt): Program audio is present but will be attenuated or muted when an operator speaks on the intercom.
The Pgm Feed Level control adjusts the level of the program audio being fed into the intercom channels.
5.5. Party Line Linking
Натисніть Party Line Link button to combine Channel A and Channel B into a single operational channel. This allows all users on both channels to communicate as if they were on one unified channel.
5.6. Sidetone Adjustment
Відрегулюйте Sidetone A і Sidetone B controls to set the level at which you hear your own voice in your headset when speaking on Channel A or B, respectively. This helps in natural conversation flow.
5.7. Remote Mic Kill
The Remote Mic Kill button, if supported by connected remote stations, can be used to remotely disable microphones on those stations. This is useful for managing audio in complex setups.
6. Технічне обслуговування
- Прибирання: Використовуйте м’яку суху тканину для очищення зовнішньої частини пристрою. Уникайте абразивних засобів для чищення або розчинників.
- Зберігання: Зберігайте пристрій у прохолодному, сухому місці, подалі від прямих сонячних променів та екстремальних температур, коли він не використовується.
- Перевірка кабелю: Regularly inspect all cables for signs of wear or damage. Replace damaged cables immediately to ensure reliable operation and safety.
- Умови навколишнього середовища: Operate the unit within specified temperature and humidity ranges to prevent damage.
7. Вирішення проблем
- Без звуку:
- Check all cable connections (power, intercom lines, headset).
- Ensure volume controls are turned up.
- Verify the headset is functioning correctly.
- Cannot Talk on a Channel:
- Ensure the Talk button is pressed or latched.
- Check microphone connection and functionality.
- D.C. Short Indicator On:
- This indicates a short circuit on the intercom line. Disconnect remote stations one by one to identify the faulty unit or cable. The CS-702 has automatic short-circuit protection and reset.
- Call Signal Not Working:
- Ensure the Call button is pressed firmly.
- Verify that remote stations are properly connected and configured to receive call signals.
8. Технічні характеристики
| Розміри продукту | 14 x 8 x 10 дюймів |
| Номер моделі товару | CC-CS702 |
| Виробник | Clear Com |
| Дата першої доступності | 29 травня 2013 р |
9. Гарантія та підтримка
For information regarding warranty coverage, technical support, or service, please refer to the documentation provided with your purchase or visit the official Clear Com website. Contacting Clear Com directly will provide the most accurate and up-to-date support information.
