Інструкція з експлуатації регульованої бази дитячого автокрісла Safety 1st onBoard 35 LT

1. Вступ

This manual provides essential information for the correct installation, use, and maintenance of your Safety 1st onBoard 35 LT Adjustable Infant Car Seat Base. Please read all instructions carefully before use and keep this manual for future reference.

This extra base is designed for use exclusively with the Safety 1st onBoard 35 LT infant car seat (sold separately). It allows for convenient transfer of the infant car seat between multiple vehicles without reinstalling the base each time.

2. Інформація про безпеку

• Always follow all instructions in this manual and the infant car seat manual.
• Never use this base with an infant car seat other than the Safety 1st onBoard 35 LT.
• Ensure the base is securely installed in the vehicle before attaching the infant car seat.
• Always check for a snug fit of the infant car seat into the base.
• Never leave a child unattended in the car seat or base.
• Refer to your vehicle owner's manual for specific car seat installation instructions and LATCH system locations.

3. Компоненти Overview

Familiarize yourself with the parts of your car seat base:

• Base Shell: The main structure of the base.
• Роз'єми LATCH: Straps with hooks for securing the base to your vehicle's LATCH anchors.
• Seatbelt Path: Designated area for routing the vehicle's seatbelt when using seatbelt installation.
• Recline Adjustment Lever: Mechanism to adjust the angle of the base for proper infant positioning.
• Індикатор рівня: Visual guide to ensure the base is installed at the correct angle.

Малюнок 3.1: Спереду view of the Safety 1st onBoard 35 LT Adjustable Infant Car Seat Base.

Малюнок 3.2: Сторона view of the car seat base, showing its profile.

Малюнок 3.3: Задня частина view of the car seat base.

4. Налаштування та встановлення

Proper installation is crucial for your child's safety. Always ensure the base is securely installed and does not move more than one inch side-to-side or front-to-back at the belt path.

4.1. Adjusting the Recline

The base features a two-position recline to ensure the infant car seat is at the correct angle for your child. Locate the recline adjustment lever on the base. Press the lever and adjust the base to the desired recline position. Consult the level indicator to confirm the correct angle for your infant's weight and age.

Figure 4.1: The adjustable recline feature of the car seat base, allowing for proper positioning in the vehicle.

4.2. Встановлення ЗАСІБКИ

1. Locate your vehicle's lower LATCH anchors. These are typically found in the crease between the seat back and bottom cushion.
2. Витягніть з'єднувачі LATCH з основи автокрісла.
3. Attach each LATCH connector to a corresponding vehicle LATCH anchor. Ensure you hear a 'click' and pull on the connectors to verify they are securely fastened.
4. Press down firmly on the car seat base while pulling the LATCH strap to tighten the connection. The base should not move more than one inch side-to-side or front-to-back.
5. Check the level indicator to ensure the base is at the correct recline angle.

Figure 4.2: The car seat base showing the LATCH strap for secure installation.

4.3. Seatbelt Installation

1. Помістіть основу автокрісла на сидіння автомобіля.
2. Route the vehicle's lap and shoulder belt through the designated seatbelt path on the base.
3. Buckle the vehicle seatbelt.
4. Remove all slack from the lap portion of the seatbelt by pressing down firmly on the car seat base and pulling the shoulder belt. Lock the vehicle seatbelt according to your vehicle's owner's manual (usually by pulling the shoulder belt all the way out and letting it retract).
5. Verify the base does not move more than one inch side-to-side or front-to-back at the belt path.
6. Check the level indicator to ensure the base is at the correct recline angle.

4.4. Video Guide: Installation Overview

Video 4.1: Official Safety 1st video demonstrating the installation and features of the onBoard LT infant car seat and base.

5. Інструкція з експлуатації

5.1. Attaching the Infant Car Seat to the Base

1. Align the infant car seat with the base.
2. Lower the infant car seat onto the base until it clicks securely into place.
3. Pull up on the infant car seat to ensure it is firmly attached to the base.

5.2. Detaching the Infant Car Seat from the Base

1. Locate the release lever or button on the infant car seat (refer to your infant car seat manual).
2. Press the release lever/button and lift the infant car seat straight up from the base.

6. Технічне обслуговування та очищення

Regular cleaning helps maintain the longevity and hygiene of your car seat base.

• база: Wipe the plastic and metal parts of the base with a damp тканину і м'яке мило. Не використовуйте абразивні засоби чи розчинники.
• ремінці: Wipe straps with a damp cloth. Do not immerse straps in water or machine wash, as this may weaken them.
• Fabric Pads (if applicable): Refer to your infant car seat manual for specific cleaning instructions for fabric pads, as they are part of the car seat, not the base.

7. Вирішення проблем

• Base is not secure: Recheck LATCH or seatbelt installation steps. Ensure all slack is removed and the base does not move more than one inch. Adjust recline if necessary.
• Infant car seat does not click into base: Ensure the base is correctly installed and level. Check for any obstructions between the car seat and base.
• Difficulty adjusting recline: Ensure the recline adjustment lever is fully engaged when attempting to change positions.

8. Технічні характеристики

Figure 8.1: Dimensions of the Safety 1st onBoard 35 LT Adjustable Infant Car Seat Base.

9. Гарантія та підтримка

For warranty information, product registration, or further assistance, please refer to the documentation included with your original purchase or visit the official Safety 1st webсайт. Зберігайте чек про покупку для гарантійних претензій.