CHANZON LED Driver Instruction Manual

1. Вступ

This manual provides essential information for the safe and efficient use of your CHANZON Constant Current LED Driver. Constant Current LED Drivers are designed to supply a consistent amount of current to LEDs, ensuring optimal performance and longevity regardless of minor variations in the load. This makes them ideal for various LED applications, including floodlights, spotlights, high-power COB LEDs, and LED panel lights.

The CHANZON LED Driver series is engineered for high quality, featuring isolation protection and CE certification to ensure safety and reliability. It operates with an AC 100-240V input and provides a constant 300mA output current with an output voltage range of 3-20V, suitable for 1-6W LED configurations. Its compact design and flicker-free operation contribute to a superior lighting experience.

2. Особливості продукту

• введення: Змінний струм 100-240 В 50/60 Гц
• Вихід: Constant Current 300mA; Voltage 3-20V; Power 1-6W
• Розміри: 51.8 х 27.9 х 20.1 мм (2.04 х 1.1 х 0.79 дюйма)
• вага: 20 г (0.7 унції)
• High Quality with CE Certificates, ensuring long lifespan and safety.
• No audible noise during operation.
• Isolation Protection for enhanced safety.
• Efficiency: Greater than 85%.
• Flicker-free output for stable illumination.
• Insulated (Low Heat) Cable with SMP Connector.
• Designed for most LED products requiring constant current power supply.

Зображення 1: спереду view of the Chanzon LED Driver, highlighting its compact plastic case and wired connections.

3. Налаштування та встановлення

Proper installation is crucial for the safe and effective operation of your LED driver. Always ensure power is disconnected before beginning any wiring.

1. Визначте підключення: The driver has clearly labeled input and output wires. The input wires (Brown for Live 'L' and Blue for Neutral 'N') connect to your AC 100-240V power source. The output wires (Red for positive '+' and Black for negative '-') connect to your LED product.
2. Електропроводка: Connect the AC input wires to your mains power supply. Connect the DC output wires to your LED load, ensuring correct polarity (Red to LED positive, Black to LED negative).
3. Безпечні з'єднання: Use appropriate wire connectors (e.g., wire nuts, solder, or terminal blocks) to ensure all connections are secure and insulated.
4. Монтаж: Position the driver in a location that allows for adequate ventilation and is protected from moisture and extreme temperatures. The compact size allows for flexible placement within light fixtures or enclosures.
5. Перевірте завантаження: Ensure that the connected LED load's voltage and current requirements fall within the driver's specified output range (3-20V, 300mA).

Image 2: Detailed diagram showing the dimensions of the LED driver and its AC input (Brown L, Blue N) and DC output (Red +, Black -) connections.

4. Інструкція з експлуатації

The CHANZON Constant Current LED Driver is designed for straightforward operation once correctly installed. It automatically regulates the current supplied to the LEDs, ensuring consistent brightness and protecting the LEDs from overcurrent.

• Увімкнення: After completing all wiring and ensuring connections are secure, apply AC power to the driver's input. The connected LEDs should illuminate.
• Constant Current Output: This driver maintains a constant 300mA output current. The output voltage will automatically adjust within the 3-20V range to match the forward voltage requirements of the connected LEDs.
• Важлива примітка: The output DC voltage can only be accurately measured under a loaded circuit (i.e., with LEDs connected). Measuring voltage without a load will result in an inaccurate reading, often showing a higher voltage than the operational voltage.

5. Технічне обслуговування

The CHANZON LED Driver is designed for long-term, maintenance-free operation. However, following these general guidelines can help ensure its continued reliability:

• Тримати в чистоті: Ensure the driver is free from dust and debris, which can impede heat dissipation.
• Умови навколишнього середовища: Operate the driver within its specified temperature and humidity ranges. Avoid exposing it to excessive heat, cold, or moisture.
• Перевірте підключення: Periodically check all electrical connections to ensure they remain tight and free from corrosion.
• Уникайте перевантаження: Do not connect LEDs that exceed the driver's maximum power or voltage specifications, as this can lead to premature failure.

6. Вирішення проблем

Якщо у вас виникли проблеми з драйвером світлодіода, розгляньте такі кроки для усунення несправностей:

• Світлодіоди не світяться:
  • Check AC input power to the driver.
  • Verify all wiring connections, especially polarity (Red to +, Black to -) for the LEDs.
  • Ensure the LED load is within the driver's specified voltagе та діапазон струму.
  • Inspect individual LEDs for damage or burnout.
• Мерехтливі світлодіоди:
  • Confirm the driver is not overloaded.
  • Перевірте наявність ослаблених з’єднань.
  • Ensure the driver is receiving stable AC input voltage.
• Перегрів драйвера:
  • Забезпечте належну вентиляцію навколо водія.
  • Verify the LED load does not exceed the driver's maximum power rating.
• Немає вихідного обсягуtage (when measured without load): This is normal. As a constant current driver, its output voltage is regulated by the load. Always measure voltage with the LEDs connected.

Image 3: A reminder that constant current LED drivers output a constant current, not constant voltage, and should be carefully matched to LED requirements. Also shows various types of CHANZON LED drivers.

7. Технічні характеристики

8. Гарантія та підтримка

CHANZON products are manufactured to high-quality standards and are CE certified, indicating compliance with essential health and safety requirements. For specific warranty details or technical support, please refer to the product packaging or contact CHANZON customer service directly.

You can find more information and contact details by visiting the official CHANZON store: CHANZON Store on Amazon.