Mastercraft 057-4554-4

Mastercraft Digital Temperature Reader

Модель: 057-4554-4

вступ

Thank you for choosing the Mastercraft Digital Temperature Reader. This device is designed for quick and accurate non-contact temperature measurement. It is particularly useful for checking the temperature of various surfaces, including cooking oil when deep frying, ensuring optimal results and safety. Please read this manual thoroughly before operation to ensure proper use and maintenance.

Інформація про безпеку

Завжди дотримуйтесь наступних запобіжних заходів, щоб запобігти травмуванню або пошкодженню пристрою:

Вміст упаковки

Будь ласка, перевірте упаковку на наявність наступних предметів:

Продукт закінченийview

Familiarize yourself with the components of your Mastercraft Digital Temperature Reader:

Mastercraft Digital Temperature Reader, front view with display showing temperature

малюнок 1: Фронт view of the Mastercraft Digital Temperature Reader. This image shows the device held in a hand, with its blue and black casing, the digital display, and the trigger for activation. The display shows temperature readings and mode indicators.

Close-up of Mastercraft Digital Temperature Reader display and control buttons

малюнок 2: Крупним планом view of the Mastercraft Digital Temperature Reader's display and control buttons. This image highlights the green backlit LCD screen showing temperature in Celsius, along with buttons for 'MODE', 'C/F' unit selection, and navigation arrows.

Налаштування

Установка батареї

The Mastercraft Digital Temperature Reader requires one D battery (included) for operation.

  1. Locate the battery compartment on the handle of the device (G in Figure 1).
  2. Відкрийте кришку батарейного відсіку, зсунувши або відсунувши її.
  3. Insert the D battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Надійно закрийте кришку батарейного відсіку.

Тепер пристрій готовий до використання.

Інструкція з експлуатації

Вимірювання температури

  1. Hold the device by the handle and point the infrared sensor (A) towards the surface you wish to measure.
  2. Pull and hold the trigger (F). The laser pointer (B) will activate, indicating the target area.
  3. The temperature reading will appear instantly on the LCD display (C). Continue holding the trigger for continuous measurement.
  4. Release the trigger to hold the last measured temperature on the display. The device will automatically shut off after a period of inactivity to conserve battery life.

Зміна одиниць вимірювання температури (°C/°F)

Щоб переключитися між градусами Цельсія (°C) та Фаренгейта (°F):

Optimal Measurement Distance

For best accuracy, ensure the target area is larger than the spot size of the measurement. The optimal distance-to-spot ratio (D:S) for this device is typically provided in the specifications. For general use, hold the device close enough to cover the desired measurement area without touching the surface.

Технічне обслуговування

Proper maintenance ensures the longevity and accuracy of your temperature reader.

Усунення несправностей

If you encounter issues with your Mastercraft Digital Temperature Reader, refer to the table below for common problems and solutions.

проблемаМожлива причинаРішення
Пристрій не вмикається.Батарея розряджена або неправильно встановлена.Перевірте полярність батареї. За потреби замініть батарею.
"Err" code on display.Measurement range exceeded or sensor error.Ensure the target temperature is within the device's specified range. If the error persists, contact customer support.
Неточні показання.Sensor lens is dirty; target surface is too reflective or too small; device is too far from target.Clean the sensor lens. Ensure the target is non-reflective and large enough. Reduce distance to target.
Laser pointer not visible.Laser is off or obstructed.Ensure the trigger is fully pressed. Check for any obstructions on the laser emitter.

Технічні характеристики

Номер моделі057-4554-4
Брендмайстерність
Джерело живлення1 x D Battery
Розміри продукту27 х 6 х 17 см
Вага продукту240.4 г
Дата першої доступності9 лютого 2017 р
ASINB06WGLJ6D2
Тип вимірюванняБезконтактний інфрачервоний
одиниціЦельсій (°C), Фаренгейт (°F)

Гарантія та підтримка

Mastercraft products are manufactured to high quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Mastercraft website. Please have your model number (057-4554-4) and ASIN (B06WGLJ6D2) ready when contacting support.

For further assistance, you may also refer to the product page on Amazon.ca: Mastercraft Digital Temperature Reader on Amazon.ca

Пов'язані документи - 057-4554-4

попередньоview Зчитувач температури Mastercraft 057-4554-4: Інструкція користувача та технічні характеристики
Вичерпний посібник з інфрачервоного вимірювача температури Mastercraft 057-4554-4, включаючи технічні характеристики, правила безпеки, короткі інструкції з експлуатації та технічне обслуговування.
попередньоview Зчитувач температури Mastercraft 057-4554-4: Інструкція користувача та технічні характеристики
Вичерпний посібник користувача для вимірювача температури Mastercraft 057-4554-4, включаючи технічні характеристики, правила безпеки, інструкції з експлуатації, технічне обслуговування та гарантійну інформацію. Дізнайтеся, як використовувати та доглядати за своїм інфрачервоним термометром.
попередньоview Керівництво користувача повітряного компресора Mastercraft 199-5704-4
Вичерпний посібник користувача для повітряного компресора Mastercraft 199-5704-4, що охоплює технічні характеристики, правила безпеки, експлуатацію, технічне обслуговування, усунення несправностей та інформацію про гарантію.
попередньоview Mastercraft Laser Distance Finder/Measuring Tool 057-4585-0 Instruction Manual
This instruction manual provides detailed information for the Mastercraft Laser Distance Finder/Measuring Tool (Model 057-4585-0). It covers technical specifications, safety guidelines, operating instructions for various measurement modes, maintenance, troubleshooting, parts list, and warranty information.
попередньоview Mastercraft Basic Stud Finder Model 057-4657-0 User Manual and Instructions
Detailed user manual for the Mastercraft Basic Stud Finder (Model 057-4657-0), providing instructions on detecting studs and live AC wires, specifications, and safety information.
попередньоview Mastercraft 11-Gallon Air Compressor Instruction Manual
Comprehensive instruction manual for the Mastercraft 11-Gallon (41.6 L) Air Compressor (Model 058-8386-8), covering safety guidelines, assembly, operation, maintenance, and troubleshooting.