1. Інформація про безпеку
Важливі інструкції з безпеки:
- Protect the unit with appropriate circuit breakers or fuses according to the nameplate.
- Переконайтеся, що подача обtage (вольт) відповідає значенню, зазначеному на заводській табличці.
- Цей пристрій необхідно заземлити. Використовуйте тільки мідні провідники.
- Використовуйте кабелі живлення, придатні для 75°C (167°F).
- Перед монтажем, ремонтом і чищенням вимкніть блок живлення на вимикачі/запобіжнику.
- Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
- Рекомендована потужність нагріву: 1.25 Вт/кубічний фут (0.03 м³).
2. Продукт закінчивсяview
The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.
Ключові характеристики:
- Потужність нагріву: 2000W (240V) / 1500W (208V), suitable for large rooms.
- КОНТРОЛЬ: Requires an external wall thermostat (sold separately).
- Тиха робота: Розроблено для мінімального шуму.
- Дизайн: Sleek, modern look with rounded corners and a durable steel cabinet.
- Установка: Designed for surface mounting with a concealed bracket.
- матеріал: 22-gauge steel front and cabinet.
- Особливість: Cool Touch Exterior.
Компоненти продукту:
This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.
Детальний view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.
На цьому зображенні показано бічний профіfile of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.
An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.
3. Налаштування та встановлення
This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.
3.1 Determining Heating Requirements:
Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).
This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.
3.2 Монтаж обігрівача:
The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.
This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.
This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.
3.3 Електричне підключення:
This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.
A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.
Video: Stelpro SOR1 High-End Convector Overview
Це відео забезпечує завершенняview of a Stelpro high-end convector, demonstrating its features and design, which may be similar to the UHC2002WCW model.
4. Операція
The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.
4.1 Ватtage Налаштування:
The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.
This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.
4.2 Керування термостатом:
Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.
5. Технічне обслуговування
Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Прибирання: Periodically wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
- Видалення пилу: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
- Огляд: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. Вирішення проблем
If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.
| проблема | Можлива причина | Рішення |
|---|---|---|
| Обігрівач не включається. | No power supply; Thermostat set too low; Internal wattage switch off. | Check circuit breaker/fuse. Ensure thermostat is set above room temperature. Verify internal wattage switch is in 1000W or 2000W position (power off before checking). |
| Недостатня теплова віддача. | Wattage setting too low; Room size exceeds heater capacity; Airflow obstruction. | Check internal wattage switch (set to 2000W if needed). Ensure heater capacity matches room size. Clear any obstructions from grilles. |
| Незвичайні шуми під час роботи. | Loose components; Dust accumulation in fan. | Ensure all mounting screws are tight. Clean fan and internal components (power off first). If noise persists, contact support. |
7. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | Стелпро |
| Номер моделі | UHC2002WCW |
| колір | Білий |
| Розміри продукту | 88.9 x 10 x 44.61 cm (35 x 3.9 x 17.5 inches); 8.57 kg (18.9 lbs) |
| Потужність/Втtage | 2000 watts (at 240V) |
| томtage | 240 вольт |
| матеріал | сталь |
| Особливість | Cool Touch Exterior |
| Спосіб нагрівання | Конвекція |
| Тип монтажу | Настінне кріплення |
| Використання в приміщенні/зовні | закритий |
| Місце діяльності | Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 0A2 |
8. Гарантія та підтримка
Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webсайт або зверніться до їхнього відділу обслуговування клієнтів. Зберігайте чек про покупку для гарантійних претензій.
This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.
