вступ
The BWT Aquameter LF (Low Flow) is designed to precisely monitor the volume of water that has passed through your water filter system. This device helps ensure timely filter replacement, maintaining optimal water quality for applications such as espresso machines. It features an LCD display for real-time capacity tracking and is compatible with various BWT water filters, including Bestmax and Besttaste series.
Продукт закінченийview
малюнок 1: BWT Aquameter LF control unit with LCD display and separate flow sensor, connected by a cable. This image shows the main components of the Aquameter LF system.
малюнок 2: The packaging for the BWT Aquameter LF, indicating its 3/8" connection and NSF certification. The packaging also displays the product number 812136 and GTIN 04250266700169.
Налаштування та встановлення
- Розпакуйте компоненти: Carefully remove the BWT Aquameter LF control unit, flow sensor, and connecting cable from the packaging.
- Визначте напрямок потоку: The flow sensor has an arrow indicating the direction of water flow. Ensure this aligns with your water line.
- Connect Flow Sensor: Install the 3/8" flow sensor into the water line before your BWT water filter. Use appropriate plumbing fittings to ensure a secure, leak-free connection.
малюнок 3: The BWT Aquameter LF control unit mounted on a wall, connected to a BWT Bestmax water filter installed under a sink. This illustrates a typical installation setup.
- Підключення блоку керування: Plug the cable from the flow sensor into the designated port on the BWT Aquameter LF control unit.
- Монтаж блоку керування: Mount the control unit in a convenient location using the provided mounting hardware. Ensure the display is easily visible.
малюнок 4: Крупний план view of the BWT Aquameter LF control unit mounted, showing the LCD display, "PROG." and "RESET" buttons, and the CE mark. The cable connecting to the flow sensor is visible.
- Початкове програмування:
- Press and hold the "PROG." button to enter programming mode.
- Use the "PROG." button to cycle through settings (e.g., total filter capacity in liters).
- Use the "RESET" button to adjust the values for each setting.
- Confirm settings by pressing "PROG." again or waiting for the unit to exit programming mode automatically.
- Set the filter capacity according to your specific BWT filter model and local water hardness.
Інструкція з експлуатації
- Monitoring Water Volume: The LCD display continuously shows the remaining filter capacity in liters. As water flows through the filter, the displayed value decreases.
- Індикатор заміни фільтра: When the displayed capacity reaches a low level or zero, it indicates that the water filter needs to be replaced. Refer to your specific BWT filter's documentation for recommended replacement intervals.
- Resetting the Meter: After replacing the water filter, press and hold the "RESET" button for at least 3 seconds to reset the meter to its programmed initial capacity. This action ensures accurate tracking for the new filter.
Технічне обслуговування
- Заміна фільтра: Regularly replace your BWT water filter according to the manufacturer's recommendations or when the Aquameter LF indicates zero remaining capacity. This ensures continued water quality and system performance.
- Прибирання: Wipe the exterior of the Aquameter LF control unit with a soft, damp тканина. Не використовуйте абразивні засоби чи розчинники.
- Заміна батареї: The Aquameter LF operates on internal batteries. If the display becomes dim or unresponsive, the batteries may need replacement. Consult a qualified technician or BWT support for battery replacement procedures.
Усунення несправностей
| проблема | Можлива причина | Рішення |
|---|---|---|
| Дисплей порожній або тьмяний. | Низький рівень заряду або розряджені батареї. | Contact BWT support for battery replacement. |
| Capacity not decreasing. | Flow sensor incorrectly installed or faulty. No water flow detected. | Check flow sensor installation, ensuring correct flow direction. Verify water flow through the system. |
| Incorrect capacity reading after filter change. | Meter not reset after filter replacement. | Press and hold the "RESET" button for 3 seconds to reset the meter. |
| Water leakage at connections. | Loose fittings or improper sealing. | Ensure all plumbing connections are tight and properly sealed with appropriate thread sealant or tape. |
Технічні характеристики
- Номер моделі: 812195
- матеріал: Акрилонітрилбутадієнстирол (АБС)
- Розміри продукту: 2.4" Г x 4.8" Ш x 4.1" В
- Flow Rate (Low Flow): 10–100 liters/hour
- Розмір підключення: 3/8 дюйма
- Вага товару: 7 унції
- Сертифікація зовнішнього тестування: NSF
- Сумісні моделі очищувачів води: BWT Bestmax, BWT Bestmax PREMIUM, BWT Besttaste
- Глобальний торговий ідентифікаційний номер (GTIN): 04250266700169
Інформація про гарантію
For detailed warranty information regarding your BWT Aquameter LF, please refer to the warranty card included with your product or visit the official BWT webсайт. Гарантійні умови можуть відрізнятися залежно від регіону.
Підтримка
If you require further assistance, technical support, or have questions about your BWT Aquameter LF, please contact BWT customer service or visit the official BWT store online.
