вступ
This instruction manual provides essential information for the proper installation, maintenance, and understanding of Pretul ROTO-3/8P4 carbon brushes for rotary hammers. These carbon brushes are critical components for the efficient operation of your tool, ensuring reliable power transfer to the motor's armature.
Продукт закінченийview
The Pretul ROTO-3/8P4 carbon brushes are replacement parts designed specifically for compatible rotary hammer models. Carbon brushes conduct electricity between the stationary and rotating parts of the motor, allowing the tool to function. Regular inspection and timely replacement of these brushes are crucial for maintaining the performance and longevity of your rotary hammer.
малюнок 1: A single Pretul carbon brush, showing the carbon block, coiled spring, and metal connector tab. This component is vital for electrical contact within the rotary hammer motor.
малюнок 2: Packaging for Pretul carbon brushes, indicating a quantity of two pieces. The packaging also displays the product name "Carbones para rotomartillo" (Carbon brushes for hammer drill) and the model number ROTO-3/8P4.
малюнок 3: Колишнійample of a Pretul rotary hammer drill, the type of tool for which these carbon brushes are designed as replacement parts. The image shows the tool's main body, chuck, and handle.
Технічні характеристики
| Атрибут | Значення |
|---|---|
| Виробник | Ціна |
| Номер деталі | 24078 |
| Номер моделі товару | 24078 |
| Вага товару | 0.704 унції |
| Розміри упаковки | 3.35 x 2.17 x 0.91 дюймів |
| томtage | 127 Volts (for compatible tools) |
| Кількість товару в упаковці | 1 (набір щіток) |
| Потрібні батареї? | немає |
Встановлення (Заміна)
Replacing carbon brushes requires careful attention to safety and proper procedure. Always refer to your specific rotary hammer's user manual for detailed instructions, as procedures may vary slightly between models. The following are general steps:
- Безпека перш за все: ALWAYS disconnect the rotary hammer from the power source before attempting any maintenance or replacement.
- Знайдіть ковпачки для щіток: Identify the brush caps on the motor housing of your rotary hammer. These are typically plastic or metal caps that can be unscrewed.
- Видаліть старі пензлі: Unscrew the brush caps. Carefully pull out the old carbon brushes, noting their orientation and how the spring is positioned.
- Чисті тримачі для пензлів: Use compressed air or a soft brush to clean any carbon dust or debris from the brush holders. Ensure the area is free of obstructions.
- Вставити нові пензлі: Insert the new Pretul ROTO-3/8P4 carbon brushes into the brush holders. Ensure they slide in smoothly and the spring applies proper pressure to the carbon block. The metal connector tab should be correctly seated.
- Надійні ковпачки для щіток: Закрутіть ковпачки щіток на місце, переконавшись, що вони надійно затягнуті, але не перетягнуті.
- Тестова операція: Reconnect the rotary hammer to the power source and perform a brief test run to ensure proper operation. Initial sparking is normal as the new brushes seat themselves.
If you are unsure about any step, it is recommended to consult a qualified technician or the rotary hammer's original service manual.
Експлуатаційні міркування
While carbon brushes themselves do not have an "operating" procedure, their proper function is essential for the rotary hammer's operation. Once installed, the brushes facilitate the flow of electricity to the motor's armature, enabling the tool to perform its drilling and hammering functions. Ensure that the brushes are correctly seated and making good contact to avoid intermittent power or motor damage during operation.
Технічне обслуговування
Carbon brushes are wear-and-tear components and require periodic inspection and replacement. The lifespan of carbon brushes depends on the tool's usage intensity and operating conditions.
- Регулярна перевірка: Periodically inspect the carbon brushes for wear. This can often be done by unscrewing the brush caps and visually checking the length of the carbon block.
- Графік заміни: Замінюйте вугільні щітки, коли вони зношуються приблизно на чверть своєї початкової довжини, або якщо на них є ознаки сколів, тріщин чи надмірного іскріння.
- Чистота: Keep the brush holders and commutator clean from carbon dust buildup, which can impede proper electrical contact and lead to premature wear.
Усунення несправностей
Issues related to carbon brushes often manifest as problems with the tool's motor. Here are common symptoms and potential causes:
- Excessive Sparking at Motor: This is a common sign of worn or improperly seated carbon brushes. It can also indicate a dirty commutator.
- Intermittent Power or No Power: If the tool cuts out during use or fails to start, worn or stuck carbon brushes are a likely cause. Check if the brushes are making consistent contact.
- Reduced Motor Speed or Power: Worn brushes can lead to inefficient power transfer, resulting in a noticeable drop in the tool's performance.
- Запах горіння: A burning smell from the motor area can indicate excessive arcing due to worn brushes or other motor issues. Discontinue use immediately.
If troubleshooting steps do not resolve the issue, or if you suspect a more serious motor problem, seek professional repair.
Гарантія та підтримка
For information regarding the warranty of your Pretul ROTO-3/8P4 carbon brushes or for technical support, please contact Pretul directly or the authorized retailer from whom you purchased the product. Keep your proof of purchase for any warranty claims.
While the product itself is a replacement part, the general return policy for this item is typically 30 days for refund or replacement, as per standard retail terms. Specific warranty details for wear parts like carbon brushes may vary.
Виробник: Ціна
