1. Вступ
This manual provides essential information for the proper installation, operation, and maintenance of your DB DRIVE K5 12D4V2 Okur(R) K5v2 Series 12-inch Subwoofer. Please read this manual thoroughly before attempting to install or operate the subwoofer to ensure optimal performance and safety.
The DB DRIVE K5 12D4V2 is a high-performance 12-inch subwoofer designed for car audio systems, featuring robust construction and advanced components for powerful and clear bass reproduction.
2. Ключові характеристики
- 12-inch subwoofer for deep bass response.
- 1,500W maximum power handling.
- 2.5-inch voice coil with 4-layer 4-ohm DVC (Dual Voice Coil) configuration.
- Heavy-gauge stamped steel basket for durability.
- Injection-molded bowl PP (Polypropylene) dust cap.
- High-temperature voice coil for extended performance.
- KSV voice-coil former.
- High-excursion butyl rubber surround for enhanced cone movement.
- Heavy-gauge spring terminals for secure wire connections.
- Proprietary PVC gasket for a sealed fit.
3. Інформація про безпеку
Завжди дотримуйтесь наступних заходів безпеки:
- Рекомендовано професійне встановлення: Встановлення компонентів автомобільної аудіосистеми може бути складним. Якщо ви не впевнені щодо якогось кроку, зверніться за допомогою до кваліфікованого професійного установника.
- Від'єднайте батарею: Before beginning any installation, disconnect the vehicle's negative battery terminal to prevent electrical shorts and damage.
- Правильна проводка: Ensure all wiring is correctly connected according to the amplifier and subwoofer specifications. Incorrect wiring can lead to damage or fire.
- Вентиляція: Забезпечте належну вентиляцію навколо сабвуфера та amplifier для запобігання перегріву.
- Рівні гучності: Prolonged exposure to high volume levels can cause hearing damage. Use caution when adjusting volume.
- Надійне кріплення: Надійно закріпіть сабвуфер, щоб запобігти його перетворенню на снаряд у разі раптового гальмування або аварії.
4. Налаштування та встановлення
Proper installation is crucial for optimal performance and longevity of your subwoofer. This section provides general guidelines. Refer to your amplifier's manual for specific wiring diagrams and power requirements.
4.1. Choosing an Enclosure
The DB DRIVE K5 12D4V2 subwoofer requires a suitable enclosure for proper operation. Common enclosure types include sealed, ported (vented), or bandpass. The choice depends on desired sound characteristics and available space. Consult a car audio specialist or online resources for recommended enclosure volumes and tuning frequencies for this specific model.
4.2. Wiring the Subwoofer
The K5 12D4V2 features a 4-layer 4-ohm DVC (Dual Voice Coil) configuration. This allows for various wiring options to achieve different impedance loads at the ampрятувальник. Звичайні конфігурації включають:
- Паралельне підключення (2 Ом): Connect the positive terminals of both voice coils together and the negative terminals of both voice coils together. This results in a 2-ohm load, suitable for ampЛіфтери стабільні на 2 Ом.
- Послідовне підключення (8 Ом): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. The remaining positive and negative terminals are then connected to the ampжижитель. Це призводить до навантаження 8 Ом.
Always match the subwoofer's impedance load to the amplifier's stable impedance rating. Refer to the wiring diagram provided with your ampліфірник.
4.3. Підключення до Ampлібератор
Connect the wired subwoofer to the appropriate speaker output terminals on your amplifier. Ensure polarity is correct (+ to + and - to -). Use high-quality speaker wire of adequate gauge to minimize power loss.

Figure 1: DB DRIVE K5 12D4V2 Subwoofer. This image displays the top view of the subwoofer, highlighting its black cone with a red trim, the durable black frame, and the heavy-gauge spring terminals for electrical connections. The red magnet cover is visible at the bottom.
5. Інструкція з експлуатації
Once installed, follow these general guidelines for operating your subwoofer:
- Початкове включення: After installation, turn on your car's audio system at a low volume. Gradually increase the volume and check for proper operation.
- AmpНалаштування lifier: Adjust the gain, crossover frequency, and phase settings on your amplifier to blend the subwoofer's output seamlessly with your main speakers.
- посилення: Встановіть коефіцієнт посилення відповідно до вихідної гучностіtage of your head unit. Avoid setting it too high, which can cause distortion.
- Фільтр низьких частот (LPF): Set the LPF to filter out frequencies above the subwoofer's intended range (typically 60Hz-100Hz).
- Фаза: Adjust the phase (0° or 180°) to ensure the subwoofer's output is in sync with your main speakers, preventing cancellation or weak bass.
- Період обкатки: Перш ніж використовувати сабвуфер на межі його потужності, дайте йому приблизно 20-30 годин нормального прослуховування. Це дозволить компонентам підвіски розслабитися та працювати оптимально.
- Уникайте перевантаження: Do not continuously play the subwoofer at distorted levels. This can cause permanent damage to the voice coil and other components.
6. Технічне обслуговування
The DB DRIVE K5 12D4V2 subwoofer requires minimal maintenance:
- Прибирання: Використовуйте м’яку суху тканину, щоб протерти дифузор та його рамку. Уникайте використання агресивних хімікатів або абразивних засобів для чищення.
- Огляд: Periodically inspect the wiring connections to ensure they are secure and free from corrosion. Check the subwoofer's surround for any signs of cracking or damage.
- Екологічні фактори: Protect the subwoofer from extreme temperatures, direct sunlight, and moisture, which can degrade its performance and lifespan.
7. Вирішення проблем
Якщо у вас виникли проблеми із сабвуфером, зверніться до наступних поширених проблем та способів їх вирішення:
| проблема | Можлива причина | Рішення |
|---|---|---|
| Немає звуку з сабвуфера |
|
|
| Спотворений або нечіткий бас |
|
|
| Перегрів сабвуфера |
|
|
If the problem persists after attempting these solutions, contact DB DRIVE customer support or a qualified car audio technician.
8. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | БД ДРАЙВ |
| Номер моделі | СБ-58148 |
| Розмір динаміка | 12 дюймів |
| Максимальна потужність | 1,500 Вт |
| Голосова котушка | 2.5" 4-layer 4-ohm DVC |
| Матеріал кошика | Heavy-gauge stampред сталі |
| Пилозахисний ковпачок | Injection-molded bowl PP |
| Об'ємний матеріал | High-excursion butyl rubber |
| Термінали | Heavy-gauge spring terminal |
| UPC | 731215374418, 782386080233 |
| Тип монтажу | Флеш-гору |
| Дата першої доступності | 30 березня 2016 р |
9. Гарантія та підтримка
For information regarding warranty coverage, technical support, or service, please refer to the official DB DRIVE webсайт або зверніться безпосередньо до їхнього відділу обслуговування клієнтів. Зберігайте чек про покупку для гарантійних претензій.
DB DRIVE Official Webсайт: www.dbdrive.net (Примітка: Це тимчасовий фрагмент URL, будь ласка, перевірте фактичну офіційну інформацію website for DB DRIVE.)





