ABB 2CSK1313CH

User Manual: ABB Indicator Light with Green Diffuser

Model: 2CSK1313CH

1. Вступ

This manual provides essential information for the safe and efficient use of the ABB Indicator Light with Green Diffuser, model 2CSK1313CH. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury.

2. Інформація про безпеку

УВАГА:

  • Встановлення має виконувати кваліфікований електрик відповідно до всіх місцевих та національних електротехнічних норм.
  • Ensure power is disconnected at the main circuit breaker before installation, maintenance, or troubleshooting.
  • Не використовуйте пристрій, якщо він пошкоджений.
  • This product is designed for specific electrical applications. Do not use it for purposes other than its intended use.

3. Продукт закінчивсяview

The ABB Indicator Light with Green Diffuser (Model 2CSK1313CH) is a signaling device designed for various electrical panels and control systems. It provides visual indication of system status, power presence, or operational states.

Фронт view of the ABB Indicator Light with Green Diffuser

Малюнок 3.1: Спереду view of the ABB Indicator Light with Green Diffuser. The image shows a rectangular white module with a prominent circular green light diffuser in the center.

Компоненти в комплекті:

  • 1 x ABB Indicator Light with Green Diffuser (Model 2CSK1313CH)

4. Налаштування та встановлення

Для правильного встановлення виконайте такі дії:

  1. Відключення живлення: Before beginning any installation, ensure that the main power supply to the circuit where the indicator light will be installed is completely disconnected. Verify with a voltagтестер.
  2. Монтаж: The indicator light is designed for panel mounting. Insert the device into the designated opening in the control panel. Ensure it is securely fastened according to the panel's specifications.
  3. Електропроводка: Connect the electrical wires to the terminals of the indicator light. Refer to the wiring diagram provided with your specific electrical panel or system for correct polarity and voltage requirements. Ensure all connections are tight and secure.
  4. Перевірка: Двічі перевірте всі з'єднання, щоб переконатися в їх правильності та надійності.
  5. Відновлення живлення: Після завершення та перевірки встановлення відновіть живлення кола.

Note: This device does not require batteries for operation.

5. Інструкція з експлуатації

The ABB Indicator Light with Green Diffuser operates as a visual signal. Once properly installed and connected to a power source, the green diffuser will illuminate when power is supplied to its terminals, indicating the status it is wired to monitor (e.g., power ON, system active, etc.).

  • функція: Provides a clear visual indication (green light) when activated.
  • активація: The light illuminates when the specified voltage is applied to its input terminals.
  • Дезактивація: The light turns off when the voltage видаляється.

6. Технічне обслуговування

The ABB Indicator Light is designed for minimal maintenance. Regular inspection is recommended to ensure continued reliable operation.

  • Прибирання: If the diffuser or housing becomes dirty, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Огляд: Periodically check for any signs of physical damage, loose connections, or discoloration. If any issues are observed, disconnect power and address them immediately.
  • Lamp Заміна: This unit typically uses an integrated LED or long-life lamp. If the light fails to illuminate, it may indicate a fault with the unit itself or the power supply. Replacement of internal components is generally not user-serviceable.

7. Вирішення проблем

If the indicator light is not functioning as expected, refer to the following common issues and solutions:

проблема Можлива причина Рішення
Світло не освітлює. Відсутнє живлення блоку. Check the circuit breaker and wiring connections. Ensure power is supplied to the correct terminals.
Світло мерехтить або тьмяне. Нестабільне живлення або погане з'єднання. Verify power supply stability. Tighten all wiring connections.
Фізичне пошкодження агрегату. Удар або неправильне поводження. Replace the damaged unit. Do not attempt to repair.

If the problem persists after attempting these solutions, contact qualified personnel or ABB customer support.

8. Технічні характеристики

Атрибут Значення
Бренд АББ
Номер моделі 2CSK1313CH
Розміри продукту 5.1 х 10.6 х 8.6 см
Вага товару 150 грами
Колір White (with Green Diffuser)
Потрібні батареї немає
GTIN (EAN) 8012542006152

9. Інформація про гарантію

For warranty details, please refer to the official ABB website or contact your local ABB distributor. Keep your purchase receipt as proof of purchase.

10. Підтримка клієнтів

For technical assistance, product inquiries, or service, please visit the official ABB website or contact their customer support line. Contact information can typically be found on the ABB corporate webсайті або на упаковці продукту.

This manual is subject to change without notice. The latest version can be found on the manufacturer's webсайт.

Пов'язані документи - 2CSK1313CH

попередньоview Керівництво з встановлення інтелектуального сенсорного шлюзу ABB Ability™ з Huawei E8372
Покрокові інструкції з встановлення та налаштування шлюзу інтелектуальних датчиків ABB Ability™ за допомогою USB-модему Huawei E8372 WiFi. Дізнайтеся, як підключитися, налаштувати параметри мережі та перевірити стан шлюзу.
попередньоview Модуль IP-дисплея ABB Welcome: Технічні характеристики та іншеview
Вичерпна інформація про модуль IP-дисплея ABB Welcome, що охоплює його підключення, технічні дані та відповідність нормам ЄС та FCC. Включає номери моделей 51381CR та 51382CR.
попередньоview Посібник користувача мультиметра ABB M1M 15
Вичерпний посібник користувача для мультиметра ABB M1M 15, що охоплює встановлення, налаштування, експлуатацію та технічні характеристики. Дізнайтеся, як точно контролювати енергоефективність за допомогою цього пристрою ABB.
попередньоview Керівництво з встановлення Bluetooth-шлюзу ABB Ability Smart Sensor Cassia X2000
Детальний посібник з встановлення Bluetooth-шлюзу ABB Ability Smart Sensor, модель Cassia X2000. Охоплює передумови, конфігурацію, налаштування мережі (PoE, LAN, Wi-Fi, стільниковий зв'язок), усунення несправностей та введення в експлуатацію.
попередньоview DELTAplus/DELTAmax Meter User Manual - ABB
Comprehensive user manual for ABB's DELTAplus and DELTAmax electronic electricity meters, covering features, installation, technical specifications, and communication protocols.
попередньоview ABB ChargeDock 01-C Operation and Installation Manual for HVC Cabinets
This operation and installation manual provides comprehensive guidance for the ABB ChargeDock 01-C, designed for HVC 200/300/360 multi-outlet cabinets. Learn about safe installation, operation, and maintenance of this electric vehicle charging solution.