1. Вступ
Цей посібник містить детальні інструкції щодо встановлення, експлуатації та обслуговування вашого Webasto 1533 Digital Timer. This timer is designed to control Webasto Thermo Top C heaters, allowing for convenient pre-programming of heating cycles. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Інформація про безпеку
- Always ensure the vehicle's power supply is disconnected before attempting any installation or maintenance.
- Installation should ideally be performed by a qualified technician to prevent damage to the device or vehicle.
- Do not expose the timer to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Використовуйте лише справжні WebЗапасні частини та аксесуари Asto.
3. Продукт закінчивсяview
The Webasto 1533 Digital Timer is an oval-shaped control unit featuring an LCD display and intuitive buttons for setting time and programming heating functions. It allows users to schedule heater operation in advance.
малюнок 3.1: Фронт view з Webasto 1533 Digital Timer, showing the oval shape, LCD display with '7:30' and a flame icon, and control buttons (up, down, set, flame/heater icon, fan icon).
малюнок 3.2: The Webasto 1533 Digital Timer displayed with its original packaging, a foam gasket, and a mounting screw. The packaging indicates multilingual labels for 'Digital timer 1533'.
4. Встановлення та налаштування
The Webasto 1533 Digital Timer is designed for integration with your vehicle's Webasto Thermo Top C heating system. Proper installation is crucial for optimal performance.
4.1 Монтаж таймера
- Select a suitable location within the vehicle cabin that is easily accessible to the driver and away from direct heat or moisture.
- Ensure there is sufficient space behind the mounting surface for the electrical connector.
- Use the provided mounting screw to secure the timer in place.
4.2 Електричне підключення
The timer connects to the heater control unit via a dedicated wiring harness (not included, may need to be purchased separately). Refer to your heater's installation manual for specific wiring diagrams.
малюнок 4.1: Задня view з Webasto 1533 Digital Timer, showing the product label with model number '1322580A' and the 4-pin electrical connector.
малюнок 4.2: Close-up of the 4-pin electrical connector on the rear of the Webasto 1533 Digital Timer, highlighting the gold-plated pins for connection to the wiring harness.
- Connect the 4-pin connector from the wiring harness to the corresponding port on the back of the timer. Ensure a secure fit.
- Once connected, restore power to the vehicle. The timer display should illuminate.
4.3 Налаштування годинника
- Натисніть НАБІР кнопку. Цифри години блиматимуть.
- Використовуйте < і > кнопки для налаштування години.
- Прес НАБІР знову. Цифри хвилин блиматимуть.
- Використовуйте < і > кнопки для налаштування хвилин.
- Прес НАБІР a third time to confirm the time.
5. Інструкція з експлуатації
5.1 Manual Heater Activation
To manually turn on the heater, press the flame/heater icon button. The heater will start and operate for a preset duration (typically 30 minutes, adjustable via heater settings).
5.2 Programming a Heating Time
The timer allows you to program up to three different start times for your heater.
- Натисніть НАБІР button repeatedly until 'P1' (Program 1) appears on the display.
- Прес НАБІР again. The hour digits for P1 will flash.
- Використовуйте < і > buttons to set the desired hour.
- Прес НАБІР. The minute digits for P1 will flash.
- Використовуйте < і > buttons to set the desired minutes.
- Прес НАБІР to confirm P1.
- Repeat steps 1-6 for P2 and P3 if additional programs are desired.
- To activate a program, press the flame/heater icon button until the desired program (P1, P2, or P3) is displayed and the flame icon is solid. The heater will start at the programmed time.
5.3 Deactivating a Program
To deactivate an active program, press the flame/heater icon button until the flame icon disappears from the display.
6. Технічне обслуговування
The Webasto 1533 Digital Timer requires minimal maintenance.
- Прибирання: Протріть дисплей та casing з м'яким, damp тканина. Не використовуйте абразивні засоби чи розчинники.
- Батарея: The timer does not contain user-replaceable batteries for its primary function. Power is supplied by the vehicle's electrical system.
7. Вирішення проблем
| проблема | Можлива причина | Рішення |
|---|---|---|
| Дисплей порожній | Немає живлення; погане з'єднання | Check vehicle's power supply and timer's electrical connection. |
| Heater does not start at programmed time | Program not activated; incorrect time setting; heater fault | Ensure program is active (flame icon solid). Verify current time and programmed time. Check heater for other faults. |
| Кнопки не реагують | Temporary software glitch; physical damage | Disconnect and reconnect power to reset. If problem persists, contact technical support. |
8. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Бренд | Webасто |
| Номер моделі | 1322580А |
| Compatible Heaters | Webasto Thermo Top C (12V) |
| Розміри (Д x Ш x В) | 11.2 х 8.1 х 3.8 см |
| Вага товару | 98 г |
| Джерело живлення | 12V (from vehicle) |
9. Гарантія та підтримка
Це Webasto 1533 Digital Timer is a genuine Webasto part, ensuring quality and compatibility with your heating system. For warranty information, please refer to the documentation provided with your original heater or contact your Webасто дилер.
Technical support is available for assistance with installation, operation, or troubleshooting. Please contact your authorized Webasto service partner or visit the official Webасто webсайт для отримання контактної інформації служби підтримки.
