1. Вступ
This manual provides essential instructions for the proper installation, operation, and maintenance of your Lexmark 12B0090 High Yield Toner Cartridge. This genuine Lexmark product is designed to deliver consistent, high-quality print output for Lexmark Optra W820 and X820 Series printers. Please read this manual thoroughly before installing or using the cartridge.
2. Інформація про безпеку
- Keep the toner cartridge out of reach of children.
- Не спалюйте використані картриджі з тонером. Пил тонера може спалахнути від відкритого вогню.
- Уникайте вдихання пилу тонера. Якщо тонер розсипався, використовуйте рекламнийamp cloth to wipe it up. Do not use a vacuum cleaner, as the fine toner particles may cause an explosion or damage the vacuum.
- Do not attempt to disassemble the toner cartridge.
- Store the cartridge in its original packaging until ready for use, in a cool, dry place away from direct sunlight.
3. Налаштування та встановлення
Follow these steps to install the Lexmark 12B0090 toner cartridge into your compatible Lexmark Optra W820 or X820 Series printer:
- Розпакуйте картридж: Carefully remove the new toner cartridge from its packaging. Retain the packaging for proper disposal of the old cartridge.
- Обережно струсіть картридж: Hold the cartridge horizontally and gently rock it from side to side 5-6 times to distribute the toner evenly inside.
- Зняти захисні матеріали: Remove any protective tape, seals, or covers from the cartridge as indicated by the instructions on the cartridge itself. Be careful not to touch the green imaging drum.
- Відкрийте дверцята доступу до принтера: Open the front cover or access door of your Lexmark Optra W820 or X820 Series printer. Refer to your printer's user manual for specific instructions on accessing the toner compartment.
- Видаліть старий картридж: Grasp the handle of the old toner cartridge and pull it straight out of the printer. Place the old cartridge into the packaging from the new cartridge for recycling.
- Вставте новий картридж: Align the new Lexmark 12B0090 toner cartridge with the guides inside the printer and slide it firmly into the slot until it clicks into place. Ensure it is seated securely.
- Закрийте дверцята доступу до принтера: Close the printer's front cover or access door. The printer will typically perform a short calibration cycle.
Image: The Lexmark 12B0090 High Yield Toner Cartridge shown in its retail packaging, ready for installation.
4. Операційна
Once the Lexmark 12B0090 toner cartridge is correctly installed, your Lexmark Optra W820 or X820 Series printer will automatically detect it and manage toner usage. The printer's control panel or software will indicate toner levels and alert you when the cartridge is nearing depletion. This high-yield cartridge is designed for approximately 30,000 pages at 5% coverage, providing extended printing before replacement is needed.
5. Технічне обслуговування
- Зберігання: Store unused toner cartridges in their sealed original packaging in a cool, dry environment, away from direct sunlight and extreme temperatures.
- Обробка: Always handle the toner cartridge by its designated handles or edges. Avoid touching the imaging drum surface, as oils from your skin can affect print quality.
- Утилізація: When the cartridge is empty, dispose of it responsibly. Lexmark offers recycling programs for used toner cartridges. Visit the official Lexmark website for information on their recycling initiatives.
6. Вирішення проблем
6.1. Погана якість друку
- Вицвілі або світлі відбитки: Gently remove the toner cartridge and rock it from side to side to redistribute the toner. Reinstall and try printing again. If the issue persists, the cartridge may be low on toner.
- Смуги або плями: Ensure the cartridge is properly seated. Check for any protective seals or tape that may not have been fully removed during installation. If the issue continues, the printer's internal components may require cleaning (refer to your printer's manual).
- Порожні сторінки: Verify that all protective packaging materials, including any sealing strips, have been completely removed from the cartridge. Reinstall the cartridge firmly.
6.2. Cartridge Not Recognized
- Перевстановіть картридж: Remove the cartridge and reinstall it, ensuring it clicks securely into place.
- Перевірте наявність перешкод: Ensure no packaging material or foreign objects are preventing proper contact between the cartridge and the printer.
- Чисті контакти: With the printer powered off and unplugged, gently wipe the metal contacts on the cartridge and inside the printer with a lint-free cloth.
- Перезавантажте принтер: Turn the printer off, wait a few seconds, and then turn it back on.
7. Технічні характеристики
| Особливість | Деталь |
|---|---|
| Номер моделі | 12B0090 |
| Тип продукту | Тонер-картридж |
| Ресурс друку | Приблизно 36 000 сторінок (при 5% покритті) |
| Сумісність | Lexmark Optra W820, X820 Series Printers |
| Розміри продукту | 19.21 x 9.69 x 7.4 дюймів |
| Вага товару | 2.23 фунта |
| UPC | 734646210430 |
8. Інформація про гарантію
For specific warranty details regarding your Lexmark 12B0090 toner cartridge, please refer to the documentation included with your purchase or visit the official Lexmark webсайт. Гарантійні умови зазвичай поширюються на виробничі дефекти та відрізняються залежно від регіону та продавця.
9. Підтримка
If you require further assistance or have questions not covered in this manual, please contact Lexmark customer support or visit their official support website. You can typically find contact information and support resources on the Lexmark website or through your product's original purchase documentation.
Lexmark Official Webсайт: www.lexmark.com
