Продукт закінченийview
The Harmar Mobility AL300 Fusion Lift is an external vehicle carrier designed to transport both power chairs and scooters. It features a versatile design compatible with a wide range of mobility devices, utilizing four Q'Straint retractors for secure attachment. The platform automatically folds when empty, and a manual crank backup is included for convenience. A swing-away option is also available.
This lift is engineered for ease of use and reliable performance, ensuring your mobility device is transported safely and efficiently.
Налаштування та встановлення
Proper installation is crucial for the safe operation of your AL300 Fusion Lift. It is recommended that installation be performed by a qualified technician. Ensure your vehicle is equipped with a Class III (2"x2") hitch receiver unless otherwise specified.
Important Vehicle Compatibility Check: Before installation, verify your vehicle's compatibility. You will need to confirm the year, make, and model of your vehicle, the make and model of your mobility scooter or power chair, the hitch class installed (Standard Class III (2" X 2") or Class II (1.25" X 1.25")), and your hitch height from the ground to the bottom of the installed hitch. Minimum requirements are 16" for a lift with a swing-away option and 18" for a lift without. If the hitch height is higher than 16", a Harmar Class III Hitch Post 5" Drop Adapter (Part# AL1235U) may be required.
The lift connects to your vehicle's battery for power. Ensure all electrical connections are secure and properly insulated.
Image: The main lift mechanism, showing the hitch connection point and power unit.
Image: The lift platform, featuring multiple slots for securing mobility devices and integrated Q'Straint retractors.
Інструкція з експлуатації
Follow these steps for safe and effective operation of your AL300 Fusion Lift:
- Lowering the Platform: Use the control switch to lower the platform to ground level. The low-profile design facilitates easy loading.
- Loading Your Device: Carefully drive or push your scooter or power chair onto the platform. The lift is designed to accommodate most models without modification.
- Захист пристрою: Utilize the four self-tensioning Q'Straint retractors to firmly secure your mobility device to the platform. Ensure all straps are tight and the device is stable.
- Raising the Platform: Once the device is securely loaded, use the control switch to raise the platform to its transport position.
- Folding the Platform (When Empty): When not in use and no device is loaded, the platform can be automatically folded up against the vehicle by flipping a single switch.
- Manual Crank Backup: In case of power failure, a manual crank backup is provided to operate the lift. Refer to the detailed manual for instructions on using the manual crank.
Технічне обслуговування
Regular maintenance ensures the longevity and safe operation of your Harmar AL300 Fusion Lift. Perform the following checks periodically:
- Inspect all moving parts for wear and tear.
- Перевірте всі болти та кріплення на міцність затягування.
- Ensure electrical connections are clean and free of corrosion.
- Lubricate pivot points and moving components as recommended in the full product manual.
- Keep the platform clean and free of debris.
For detailed maintenance schedules and procedures, consult the complete Harmar AL300 Fusion Lift owner's manual.
Усунення несправностей
If you encounter issues with your AL300 Fusion Lift, consider the following common troubleshooting steps:
- Ліфт не реагує: Check all electrical connections, including the battery connection. Ensure the key is fully inserted and turned to the 'ON' position. Verify the vehicle's battery has sufficient charge.
- Platform Not Moving Smoothly: Inspect for any obstructions or debris on the platform or in the lift mechanism. Check for loose or damaged components.
- Device Not Securing Properly: Ensure the Q'Straint retractors are correctly engaged and tightened. Inspect straps for damage or excessive wear.
For persistent issues or complex problems, contact Harmar Mobility customer support or a certified service technician.
Технічні характеристики
| Назва моделі: | AL300 Fusion Lift |
| Бренд: | Хармар |
| Виробник: | Harmar Mobility |
| Вага: | 350 фунтів |
| матеріал: | Vinyl (Note: This might be for a component, not the entire lift structure. Clarification needed from full manual.) |
| колір: | чорний |
| Стиль: | Сучасний |
| ASIN: | B010CE6VCO |
Інформація про гарантію
Specific warranty details for the Harmar AL300 Fusion Lift are typically provided with the product at the time of purchase. Please refer to the warranty card or documentation included in your product packaging for comprehensive information regarding coverage, duration, and claims procedures. For general warranty inquiries, you may visit the official Harmar Mobility webсайту або зв’яжіться зі своїм відділом обслуговування клієнтів.
Підтримка клієнтів
For further assistance, technical support, or to address any questions regarding your Harmar AL300 Fusion Lift, please contact Harmar Mobility directly. You can often find contact information on the manufacturer's webсайту або в документації продукту.
Важливе повідомлення: This product can expose you to chemicals including lead and lead components, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, please visit www.p65warnings.ca.gov.
