1. Важливі інструкції з техніки безпеки
Always prioritize safety when handling or replacing the lawn mower blade. Failure to follow these instructions can result in serious injury.
- Відключити живлення: Before performing any maintenance or blade replacement, always ensure the lawn mower is completely switched off and disconnected from its power source (unplug electric mowers, remove spark plug cap for petrol mowers).
- Одягайте захисне спорядження: Always wear heavy-duty gloves to protect your hands from sharp edges. Safety glasses are also recommended.
- Стабільна поверхня: Work on a flat, stable surface. Ensure the mower is securely supported and cannot tip over during blade replacement.
- Стан леза: Inspect the blade regularly for damage, cracks, or excessive wear. A damaged blade can be dangerous and should be replaced immediately.
- Правильна заміна: Use only genuine Einhell replacement parts or approved equivalents. Incorrect blades can affect performance and safety.
- Утилізація: Dispose of old blades responsibly, ensuring sharp edges are covered to prevent injury.
2. Вміст упаковки
Carefully unpack the product and check that all items are present and in good condition.
- 1 x Einhell GC-EM 1742 Replacement Blade (Model: 3405440)
Image showing the Einhell GC-EM 1742 replacement blade, designed for rotary lawn mowers.
3. Installation Instructions (Blade Replacement)
Follow these steps to safely replace the blade on your Einhell GC-EM 1742 lawn mower.
- Підготовка газонокосарки: Ensure the mower is turned off and disconnected from power. For petrol mowers, remove the spark plug cap. For electric mowers, unplug from the mains.
- Розташування газонокосарки: Carefully tilt the mower onto its side, ensuring the carburetor (for petrol mowers) or air filter (for electric mowers) faces upwards to prevent fuel or oil leakage.
- Закріпіть лезо: Щоб запобігти обертанню леза під час відкручування болта, вставте дерев'яний брусок між лезом і декою газонокосарки.
- Зняти старе лезо: Using an appropriate wrench, loosen the blade retaining bolt (usually counter-clockwise). Remove the bolt, washer, and the old blade. Note the orientation of the old blade for correct installation of the new one.
- Очистити територію: Clean any grass clippings or debris from the blade mounting area on the mower shaft.
- Встановлення нового леза: Place the new Einhell GC-EM 1742 replacement blade onto the mower shaft, ensuring it is correctly oriented (the cutting edges should face the direction of rotation, typically upwards towards the deck). The blade should sit flush against the blade boss.
- Reattach Hardware: Place the washer and blade retaining bolt back onto the shaft.
- Tighten Blade: While still wedging the blade with a block of wood, tighten the blade retaining bolt securely (usually clockwise). Refer to your mower's specific manual for torque specifications if available.
- Остаточна перевірка: Remove the wood block. Rotate the blade by hand to ensure it spins freely and is properly secured. Return the mower to its upright position.
- Знову підключіть живлення: Reconnect the spark plug cap or plug in the electric mower.
4. Технічне обслуговування
Proper maintenance extends the life of your blade and ensures optimal cutting performance.
- Регулярна перевірка: Before each use, inspect the blade for nicks, bends, or cracks. Replace immediately if damaged.
- Прибирання: After each use, disconnect power and clean grass clippings and debris from the blade and underside of the mower deck.
- Заточка: The blade can be sharpened periodically to maintain cutting efficiency. Use a blade sharpener or file, maintaining the original blade angle. Ensure the blade remains balanced after sharpening to prevent excessive vibration. If unsure, consult a professional.
- Балансування: An unbalanced blade can cause excessive vibration, damage to the mower, and an uneven cut. After sharpening or if you suspect imbalance, check the blade's balance. A simple method is to hang the blade horizontally on a nail through its center hole; if one side drops, it's heavier and needs more material removed from that side.
- Зберігання: When storing the mower for extended periods, ensure the blade is clean and lightly oiled to prevent rust.
5. Troubleshooting Common Blade Issues
| проблема | Можлива причина | Рішення |
|---|---|---|
| Uneven cut / Ragged grass | Тупе або зігнуте лезо | Sharpen or replace the blade. Inspect for bends and replace if necessary. |
| Надмірна вібрація газонокосарки | Unbalanced or bent blade; loose blade bolt | Check blade balance and rebalance if needed. Replace bent blade. Tighten blade bolt securely. |
| Лезо не обертається вільно | Debris caught around shaft; blade bolt too tight | Disconnect power, clear debris. Ensure blade bolt is tight but not overtightened to impede rotation. |
6. Технічні характеристики
- Номер моделі: 3405440
- ASIN: B00SY67PO6
- Ширина різання: 42 Сантиметри
- матеріал: метал
- Вага товару: Приблизно 350 грамів (12.3 унції)
- Розміри продукту: Приблизно 4.72 x 1.97 x 5.12 дюймів (Д x Ш x В)
- Сумісність: Designed for Einhell GC-EM 1742 Rotary Lawn Mower
7. Гарантія та підтримка
For warranty information, technical support, or to purchase additional replacement parts, please refer to the official Einhell webсайту або зв’яжіться зі своїм відділом обслуговування клієнтів.
Зберігайте чек про покупку як підтвердження покупки для будь-яких гарантійних претензій.
Офіційний Einhell Webсайт: www.einhell.com
